소수력 발전은 자연적인 지역 조건과 조화를 이루고 대형 화력 발전소나 기존 댐, 정수장에 설치가 용이하여 환경오염에 대한 영향이 거의 없는 청정에너지이다. 현재 우리나라의 대형화력 발전단지에서 냉각수로 사용되고 방류되는 해수는 약 150 m³/s로 약 3,000 kW 이상의 수력에너지를 보유하고 있으며 방류는 함암거(Box Culvert) 혹은 개수로(OPEN ...
소수력 발전은 자연적인 지역 조건과 조화를 이루고 대형 화력 발전소나 기존 댐, 정수장에 설치가 용이하여 환경오염에 대한 영향이 거의 없는 청정에너지이다. 현재 우리나라의 대형화력 발전단지에서 냉각수로 사용되고 방류되는 해수는 약 150 m³/s로 약 3,000 kW 이상의 수력에너지를 보유하고 있으며 방류는 함암거(Box Culvert) 혹은 개수로(OPEN CHANNEL) 형태의 구조물로서, 온배수 방수로에는 유속 2 m/s 이상의 빠른 흐름이 존재하여 수력발전을 할 수 있으나 현재 활용 되지 못하고 그대로 해양으로 방류되고 있어 이에 대한 회수를 고려할 필요가 있다. 이들 발전소 방류구에서는 연중 방류량이 일정하여 이를 이용할 경우 연중 일정한 전력을 생산할 수 있고 발전량 또한 매우 크다.
본 연구를 통하여 또한 환경적인 측면으로 온배수문제와 거품발생의 환경 문제 등을 해결 할 수 있다. 기존에 대형화력 발전소에서 냉각수로 사용되고 방류되는 온배수를 그대로 해양으로 방류되지만 환경오염 및 주변 생태계의 변화를 우려하여 수력발전을 사용하게 된다면 수력 발전에 사용되는 터빈이 회전을 함으로써 방류 속도를 늦출 수 있기 때문에 발전소에서 사용되어지고 방류되는 온배수에 대한 열이 감소하여 온배수 문제를 해결 할 수 있으며 거품 문제의 경우 터빈의 구성요소 중 블레이드가 회전을 함으로써 거품을 분쇄시켜 거품문제를 해결 할 수 있게 된다.
본 연구는 하동화력 발전소 배수로를 대상으로 방류수의 수력에너지 개발을 위하여 조류식 발전시스템을 개발하는 것이다. 하동 화력발전소에서 7·8호기 배수로에 설치예정인 조류식 발전시스템의 실용화를 위하여 실제규모 시험설비를 제작 설치하고 시험 운영함으로써 이들의 성능 및 효과, 개선점을 파악하여 최적 개발 방안을 정립하고자 한다.
본 연구는 Flow-3D 프로그램을 사용하여 하동화력발전소에 설치 될 7·8호기의 적합단면을 검토하였고, 특히 실험 조건에 따른 SEAL WELL부의 수위 및 유속 변화를 확인 하였다.
그 결과 SEAL WELL부에서 고극조위(Highest High Water Level H.H.W.L)시 터빈의 설치 전·후를 비교해본 결과 0.023 m 수위 상승과 0.156 m/s 유속 감소가 나타났음을 알 수 있었으며 평균해면(Mean Sea Level M.S.L)시 터빈 설치 전·후를 비교한 결과 0.039 m 수위상승과 0.119 m/s 유속이 감소함을 알 수 있었다. 또한 조위 조건이 빈도수가 아주 작은 고극조위이므로 내부계통에 영향을 박지 않는 다는 것을 알 수 있었다.
소수력 발전은 자연적인 지역 조건과 조화를 이루고 대형 화력 발전소나 기존 댐, 정수장에 설치가 용이하여 환경오염에 대한 영향이 거의 없는 청정에너지이다. 현재 우리나라의 대형화력 발전단지에서 냉각수로 사용되고 방류되는 해수는 약 150 m³/s로 약 3,000 kW 이상의 수력에너지를 보유하고 있으며 방류는 함암거(Box Culvert) 혹은 개수로(OPEN CHANNEL) 형태의 구조물로서, 온배수 방수로에는 유속 2 m/s 이상의 빠른 흐름이 존재하여 수력발전을 할 수 있으나 현재 활용 되지 못하고 그대로 해양으로 방류되고 있어 이에 대한 회수를 고려할 필요가 있다. 이들 발전소 방류구에서는 연중 방류량이 일정하여 이를 이용할 경우 연중 일정한 전력을 생산할 수 있고 발전량 또한 매우 크다.
본 연구를 통하여 또한 환경적인 측면으로 온배수문제와 거품발생의 환경 문제 등을 해결 할 수 있다. 기존에 대형화력 발전소에서 냉각수로 사용되고 방류되는 온배수를 그대로 해양으로 방류되지만 환경오염 및 주변 생태계의 변화를 우려하여 수력발전을 사용하게 된다면 수력 발전에 사용되는 터빈이 회전을 함으로써 방류 속도를 늦출 수 있기 때문에 발전소에서 사용되어지고 방류되는 온배수에 대한 열이 감소하여 온배수 문제를 해결 할 수 있으며 거품 문제의 경우 터빈의 구성요소 중 블레이드가 회전을 함으로써 거품을 분쇄시켜 거품문제를 해결 할 수 있게 된다.
본 연구는 하동화력 발전소 배수로를 대상으로 방류수의 수력에너지 개발을 위하여 조류식 발전시스템을 개발하는 것이다. 하동 화력발전소에서 7·8호기 배수로에 설치예정인 조류식 발전시스템의 실용화를 위하여 실제규모 시험설비를 제작 설치하고 시험 운영함으로써 이들의 성능 및 효과, 개선점을 파악하여 최적 개발 방안을 정립하고자 한다.
본 연구는 Flow-3D 프로그램을 사용하여 하동화력발전소에 설치 될 7·8호기의 적합단면을 검토하였고, 특히 실험 조건에 따른 SEAL WELL부의 수위 및 유속 변화를 확인 하였다.
그 결과 SEAL WELL부에서 고극조위(Highest High Water Level H.H.W.L)시 터빈의 설치 전·후를 비교해본 결과 0.023 m 수위 상승과 0.156 m/s 유속 감소가 나타났음을 알 수 있었으며 평균해면(Mean Sea Level M.S.L)시 터빈 설치 전·후를 비교한 결과 0.039 m 수위상승과 0.119 m/s 유속이 감소함을 알 수 있었다. 또한 조위 조건이 빈도수가 아주 작은 고극조위이므로 내부계통에 영향을 박지 않는 다는 것을 알 수 있었다.
Tidal Current Hydro Power System is a clean energy which is flexible to be installed in a previous dam, large thermal power plant, and water purification plant so it has only few negative effect to environment, and is also a part of tidal power plan that harmonies with environmental background aroun...
Tidal Current Hydro Power System is a clean energy which is flexible to be installed in a previous dam, large thermal power plant, and water purification plant so it has only few negative effect to environment, and is also a part of tidal power plan that harmonies with environmental background around. Currently in a large thermal power plant in Korea, sea water discharged after being used as cooling water is approximately 150 m³/s that is about 3,000 kW of hydro energy, discharging being structured as Box Culvert or open channel type could have used as hydro power generation since it has 2 m/s of a waterway, but it is being discharged to sea so there is a need to be re-considered with that. In these power plant discharging holes, annual discharging amount is constant and when it is used, constant power could be generated and the amount is huge.
In environmental side, this study could solve temperature gradient and foaming problem. temperature gradient being used as cooling in a previous large thermal power plant, is discharged to sea, but when considering environmental side and using hydro power generation, turbine could solve temperature gradient problem by slowing down discharging speed and foaming problem could be solved with same method.
This study targets to develop tidal power generation system so hydro power of discharging water can be developed specifically in Hadong thermal power plant drain ditch. For tidal power generating system to be practical and being scheduled to be installed at No 7 and 8 drain ditches in Hadong thermal power plant, the actual laboratory equipment to be installed and practiced is planned so that performance, effect, and improvements should be found and the best development plan will be established.
This study reviewed suitable cross-section of No. 7 and 8 planned to be installed in Hadong thermal power plant by using Flow-3D program, especially water level and speed of current of seal well were checked by experimental conditions.
As a result,0.023 m of water level increased and 0.156 m/s of water speed decreased came out when compared before and after installing turbine when tidal level is the highest at seal well. Also, tidal level condition is the highest, which frequency is very low, so the fact that it doesn't affect internal system was confirmed.
Tidal Current Hydro Power System is a clean energy which is flexible to be installed in a previous dam, large thermal power plant, and water purification plant so it has only few negative effect to environment, and is also a part of tidal power plan that harmonies with environmental background around. Currently in a large thermal power plant in Korea, sea water discharged after being used as cooling water is approximately 150 m³/s that is about 3,000 kW of hydro energy, discharging being structured as Box Culvert or open channel type could have used as hydro power generation since it has 2 m/s of a waterway, but it is being discharged to sea so there is a need to be re-considered with that. In these power plant discharging holes, annual discharging amount is constant and when it is used, constant power could be generated and the amount is huge.
In environmental side, this study could solve temperature gradient and foaming problem. temperature gradient being used as cooling in a previous large thermal power plant, is discharged to sea, but when considering environmental side and using hydro power generation, turbine could solve temperature gradient problem by slowing down discharging speed and foaming problem could be solved with same method.
This study targets to develop tidal power generation system so hydro power of discharging water can be developed specifically in Hadong thermal power plant drain ditch. For tidal power generating system to be practical and being scheduled to be installed at No 7 and 8 drain ditches in Hadong thermal power plant, the actual laboratory equipment to be installed and practiced is planned so that performance, effect, and improvements should be found and the best development plan will be established.
This study reviewed suitable cross-section of No. 7 and 8 planned to be installed in Hadong thermal power plant by using Flow-3D program, especially water level and speed of current of seal well were checked by experimental conditions.
As a result,0.023 m of water level increased and 0.156 m/s of water speed decreased came out when compared before and after installing turbine when tidal level is the highest at seal well. Also, tidal level condition is the highest, which frequency is very low, so the fact that it doesn't affect internal system was confirmed.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.