지난 20년간 비정형 건축 양식을 통해 건축가들은 미적 표현을 다양하게 구현하게 되었다. 또한 컴퓨터 과학, 재로 및 장비 등의 발전으로 공사기간 및 공사비를 줄이기 위한 비정형 건축물의 새로운 설계와 시공기술이 구현되고 있다. 그러나 비정형 건물의 구현은 일반적 건물보다 훨씬 많은 시간과 비용이 투입된 다는 것을 여러 프로젝트의 사례에서 확인할 수 있다. 그 이유는 비정형 부재의 생산을 위한 거푸집 또는 몰드를 만드는데 많은 시간과 인력이 투입되면서도 재활용을 할 수 없기 때문이다. 특히, 비교적 값싼 재료인 콘크리트로 비정형 부재를 생산하는 경우에도 거푸집 제작에 매우 많은 비용 투입된다. 이로 인해 생산성 저하, 비용증가 및 공기증가의 문제점이 발생한다. 이에 비정형 건축물의 경제성 및 시공성 확보를 위해 원가, 시간, 품질, 안전 등의 한계를 해결할 수 있는 기술 개발이 필요하다. 이에 본 연구에서는 비정형 건축물의 국내외 연구동향 조사 및 기존 비정형 건축물을 조사하고 이에 대한 문제점을 제시하였다. 또한 문제점 해결을 위한 제시방안으로 첫째, FCS 제작운영을 위하여 FCS 정보분류체계 정의, 종표꼭지점 현상 및 이를 해결을 위한 종표꼭지점 각도 계산식을 제시하였다. 또한 NC Machine 개발을 통하여 FCS Mold의 형상화 기술, 제작기술을 제시하였다. 둘째, 개발된 FCS Mold 및 FCS의 효율적인 공급 및 설치 관리를 위하여 생산 방식별의 생산 공기산정, 생산 및 설치 간의 공사계획을 제시하였다. 특히, 생산 방식별 생산 공기산정을 위하여 반복 공종의 수 및 선·후행 공정을 파악을 통하여 총 생산주기 산정 ...
지난 20년간 비정형 건축 양식을 통해 건축가들은 미적 표현을 다양하게 구현하게 되었다. 또한 컴퓨터 과학, 재로 및 장비 등의 발전으로 공사기간 및 공사비를 줄이기 위한 비정형 건축물의 새로운 설계와 시공기술이 구현되고 있다. 그러나 비정형 건물의 구현은 일반적 건물보다 훨씬 많은 시간과 비용이 투입된 다는 것을 여러 프로젝트의 사례에서 확인할 수 있다. 그 이유는 비정형 부재의 생산을 위한 거푸집 또는 몰드를 만드는데 많은 시간과 인력이 투입되면서도 재활용을 할 수 없기 때문이다. 특히, 비교적 값싼 재료인 콘크리트로 비정형 부재를 생산하는 경우에도 거푸집 제작에 매우 많은 비용 투입된다. 이로 인해 생산성 저하, 비용증가 및 공기증가의 문제점이 발생한다. 이에 비정형 건축물의 경제성 및 시공성 확보를 위해 원가, 시간, 품질, 안전 등의 한계를 해결할 수 있는 기술 개발이 필요하다. 이에 본 연구에서는 비정형 건축물의 국내외 연구동향 조사 및 기존 비정형 건축물을 조사하고 이에 대한 문제점을 제시하였다. 또한 문제점 해결을 위한 제시방안으로 첫째, FCS 제작운영을 위하여 FCS 정보분류체계 정의, 종표꼭지점 현상 및 이를 해결을 위한 종표꼭지점 각도 계산식을 제시하였다. 또한 NC Machine 개발을 통하여 FCS Mold의 형상화 기술, 제작기술을 제시하였다. 둘째, 개발된 FCS Mold 및 FCS의 효율적인 공급 및 설치 관리를 위하여 생산 방식별의 생산 공기산정, 생산 및 설치 간의 공사계획을 제시하였다. 특히, 생산 방식별 생산 공기산정을 위하여 반복 공종의 수 및 선·후행 공정을 파악을 통하여 총 생산주기 산정 알고리즘을 제시하였다. 예를 들어 PCM 장치 1개의 직렬형 방식의 경우 FCS 1개는 1.24일 동안 생산되며, PCM 장치 12개의 병렬/방사형 방식의 경우 1개 FCS는 0.19일 동안 생산된다. 이처럼 PCM 장치의 개수에 따라 FCS의 생산량 및 생산속도는 상이해진다. 이에 시공자는 공사여건에 따라 선택적으로 계획할 수 있다. 이처럼 본 연구는 비정형 콘크리트 건축의 현황을 분석하고 그 문제점을 개선할 수 있는 기술개발 방향을 제안하였다. 본 연구에서 제안하는 기술이 개발되면 생산성 향상은 물론 비용 및 공기를 적정한 수준으로 가능하며, 향후 다양한 비정형 건물의 설계 및 시공자와 현장여건에 의한, 현장관리에 도움이 되는 비정형 콘크리트 부재의 생산이 가능할 것이다. 본 연구의 결과는 경험과 감에 의존하기보다 엔지니어링과 연구를 통하여 보다 적합한 공법을 개발 혹은 선택할 수 있다는 것을 증명하였다. 향후 본 연구와 같이 엔지니어의 고민을 통해 문제점을 체계적으로 분석하고 해결책을 제시한다면 건설기술의 발전을 앞당길 수 있을 것으로 판단된다.
지난 20년간 비정형 건축 양식을 통해 건축가들은 미적 표현을 다양하게 구현하게 되었다. 또한 컴퓨터 과학, 재로 및 장비 등의 발전으로 공사기간 및 공사비를 줄이기 위한 비정형 건축물의 새로운 설계와 시공기술이 구현되고 있다. 그러나 비정형 건물의 구현은 일반적 건물보다 훨씬 많은 시간과 비용이 투입된 다는 것을 여러 프로젝트의 사례에서 확인할 수 있다. 그 이유는 비정형 부재의 생산을 위한 거푸집 또는 몰드를 만드는데 많은 시간과 인력이 투입되면서도 재활용을 할 수 없기 때문이다. 특히, 비교적 값싼 재료인 콘크리트로 비정형 부재를 생산하는 경우에도 거푸집 제작에 매우 많은 비용 투입된다. 이로 인해 생산성 저하, 비용증가 및 공기증가의 문제점이 발생한다. 이에 비정형 건축물의 경제성 및 시공성 확보를 위해 원가, 시간, 품질, 안전 등의 한계를 해결할 수 있는 기술 개발이 필요하다. 이에 본 연구에서는 비정형 건축물의 국내외 연구동향 조사 및 기존 비정형 건축물을 조사하고 이에 대한 문제점을 제시하였다. 또한 문제점 해결을 위한 제시방안으로 첫째, FCS 제작운영을 위하여 FCS 정보분류체계 정의, 종표꼭지점 현상 및 이를 해결을 위한 종표꼭지점 각도 계산식을 제시하였다. 또한 NC Machine 개발을 통하여 FCS Mold의 형상화 기술, 제작기술을 제시하였다. 둘째, 개발된 FCS Mold 및 FCS의 효율적인 공급 및 설치 관리를 위하여 생산 방식별의 생산 공기산정, 생산 및 설치 간의 공사계획을 제시하였다. 특히, 생산 방식별 생산 공기산정을 위하여 반복 공종의 수 및 선·후행 공정을 파악을 통하여 총 생산주기 산정 알고리즘을 제시하였다. 예를 들어 PCM 장치 1개의 직렬형 방식의 경우 FCS 1개는 1.24일 동안 생산되며, PCM 장치 12개의 병렬/방사형 방식의 경우 1개 FCS는 0.19일 동안 생산된다. 이처럼 PCM 장치의 개수에 따라 FCS의 생산량 및 생산속도는 상이해진다. 이에 시공자는 공사여건에 따라 선택적으로 계획할 수 있다. 이처럼 본 연구는 비정형 콘크리트 건축의 현황을 분석하고 그 문제점을 개선할 수 있는 기술개발 방향을 제안하였다. 본 연구에서 제안하는 기술이 개발되면 생산성 향상은 물론 비용 및 공기를 적정한 수준으로 가능하며, 향후 다양한 비정형 건물의 설계 및 시공자와 현장여건에 의한, 현장관리에 도움이 되는 비정형 콘크리트 부재의 생산이 가능할 것이다. 본 연구의 결과는 경험과 감에 의존하기보다 엔지니어링과 연구를 통하여 보다 적합한 공법을 개발 혹은 선택할 수 있다는 것을 증명하였다. 향후 본 연구와 같이 엔지니어의 고민을 통해 문제점을 체계적으로 분석하고 해결책을 제시한다면 건설기술의 발전을 앞당길 수 있을 것으로 판단된다.
Over the last twenty years, architects have materialized various aesthetic expressions through free-form architecture. With the advancement in various fields including computer science, materials and equipment, new design and construction technologies have been introduced to shorten the construction...
Over the last twenty years, architects have materialized various aesthetic expressions through free-form architecture. With the advancement in various fields including computer science, materials and equipment, new design and construction technologies have been introduced to shorten the construction period. Many projects show, however, that free-form buildings take much more time and cost to materialize, than typical buildings do. That’s because while free-form members take a lot of time and labor, they are not reusable. A lot of cost is needed even when molds are produced with concrete, one of less expensive materials, which causes problems such as lower productivity, higher cost, as well as longer construction period. Therefore, it is needed to develop technologies which can solve limits of free-form architecture related to cost, time, and quality, and safety in order to secure economic feasibility and constructability. This study investigates domestic and international research trend about free-form architecture, examines existing free-form buildings and presents some problems. It also suggests measures to solve the problems of them. First, it suggests the definition of FCS(Free-form Concrete segments) information classification system to produce and operate FCS, formula to calculate the angle of subordinate vertex in order to solve subordinate vertex problem as well as technologies to shape and produce FCS and FCS molds through development of NC machine. Second, it also suggests construction period calculation by production method for efficient supply, installation, and management of developed FCS molds and FCS, especially an algorithm to calculate total production cycle with the number of repeated processes, and sequence among them. For example, with a serial method using one PCM(Phase Change Material) device, it would take 1.24 days to produce a FCS, while it would take 0.19 day with parallel a method using 12 PCM devices. Like this, output and production speed depend on the number of PCM devices. So constructors can select a proper method, depending on construction conditions. This study analyzes current status of free-form concrete buildings and suggests directions for technology development to improve problems of them. It is expected that the development of technologies would improve productivity including cost and construction reduction and allow production of free-form concrete members which will be helpful to proper site management according to design, constructor, and site conditions. This study findings proves that more appropriate construction methods can be developed or selected through engineering and research, instead of simply depending on experience and sense of individuals. It is considered that if this study is followed by more efforts of engineers to analyze problems and suggest solutions, that would advance the development of construction technology.
Over the last twenty years, architects have materialized various aesthetic expressions through free-form architecture. With the advancement in various fields including computer science, materials and equipment, new design and construction technologies have been introduced to shorten the construction period. Many projects show, however, that free-form buildings take much more time and cost to materialize, than typical buildings do. That’s because while free-form members take a lot of time and labor, they are not reusable. A lot of cost is needed even when molds are produced with concrete, one of less expensive materials, which causes problems such as lower productivity, higher cost, as well as longer construction period. Therefore, it is needed to develop technologies which can solve limits of free-form architecture related to cost, time, and quality, and safety in order to secure economic feasibility and constructability. This study investigates domestic and international research trend about free-form architecture, examines existing free-form buildings and presents some problems. It also suggests measures to solve the problems of them. First, it suggests the definition of FCS(Free-form Concrete segments) information classification system to produce and operate FCS, formula to calculate the angle of subordinate vertex in order to solve subordinate vertex problem as well as technologies to shape and produce FCS and FCS molds through development of NC machine. Second, it also suggests construction period calculation by production method for efficient supply, installation, and management of developed FCS molds and FCS, especially an algorithm to calculate total production cycle with the number of repeated processes, and sequence among them. For example, with a serial method using one PCM(Phase Change Material) device, it would take 1.24 days to produce a FCS, while it would take 0.19 day with parallel a method using 12 PCM devices. Like this, output and production speed depend on the number of PCM devices. So constructors can select a proper method, depending on construction conditions. This study analyzes current status of free-form concrete buildings and suggests directions for technology development to improve problems of them. It is expected that the development of technologies would improve productivity including cost and construction reduction and allow production of free-form concrete members which will be helpful to proper site management according to design, constructor, and site conditions. This study findings proves that more appropriate construction methods can be developed or selected through engineering and research, instead of simply depending on experience and sense of individuals. It is considered that if this study is followed by more efforts of engineers to analyze problems and suggest solutions, that would advance the development of construction technology.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.