도금공정에서 발생되는 도금폐수는 시안계, 산.알카리계 폐수가 발생되고 있다. 이 폐수를 처리하기 위한 공정은 매우 복잡하고 처리비용이 많이 발생하여 사업 수행에 많은 부담으로 작용하고 있다. 특히 폐수처리를 위해 사용되는 중화제, 응집제 등의 화학물질은 인체에 유해한 물질로서 위험 부담도 가중되고 있다. 본 연구에서는 도금공정에서 발생되는 폐수...
도금공정에서 발생되는 도금폐수는 시안계, 산.알카리계 폐수가 발생되고 있다. 이 폐수를 처리하기 위한 공정은 매우 복잡하고 처리비용이 많이 발생하여 사업 수행에 많은 부담으로 작용하고 있다. 특히 폐수처리를 위해 사용되는 중화제, 응집제 등의 화학물질은 인체에 유해한 물질로서 위험 부담도 가중되고 있다. 본 연구에서는 도금공정에서 발생되는 폐수의 특성과 폐수처리장 운영 프로세스 및 문제점을 분석하고 개선하는 방안을 연구하였다. 폐수처리장에서 사용되는 약품비는 전체 운영경비의 85%를 차지하고 있다. 폐수의 특성을 분석한 결과 원폐수(pH 3~4)와 응집제(pH 3)가 동일 성상의 산성물질로 처리 후 중화(pH 7)시 약품사용량이 증가되고 있었다. 응집제를 알카리 응집제로 대체하였다. 대체 후 산화조와 pH조정조에 투입되는 약품비의 57%를 절감 하였다. 또한 폐수처리 pH조절용 약품인 황산(98%)은 유독물이면서 취급자 건강상 치명적인 질병을 유발할 수 있어 이를 희염산(8%)로 대체하여 약품취급자의 약품취급 시 위험을 저감시켰다. 사업의 확장으로 폐수처리장의 처리용량을 늘려야 하는 사례가 발생하였다. 하지만 물리적인 증설 없이 처리장치 변경 및 체류시간 증가 등의 프로세스개선을 통해 종전 4,600톤/일에서 5,000톤/일로 9% 개선효과를 얻었으며 폐수처리장 증설에 필요한 투자비 20억원의 경비를 절감할 수 있었다.
도금공정에서 발생되는 도금폐수는 시안계, 산.알카리계 폐수가 발생되고 있다. 이 폐수를 처리하기 위한 공정은 매우 복잡하고 처리비용이 많이 발생하여 사업 수행에 많은 부담으로 작용하고 있다. 특히 폐수처리를 위해 사용되는 중화제, 응집제 등의 화학물질은 인체에 유해한 물질로서 위험 부담도 가중되고 있다. 본 연구에서는 도금공정에서 발생되는 폐수의 특성과 폐수처리장 운영 프로세스 및 문제점을 분석하고 개선하는 방안을 연구하였다. 폐수처리장에서 사용되는 약품비는 전체 운영경비의 85%를 차지하고 있다. 폐수의 특성을 분석한 결과 원폐수(pH 3~4)와 응집제(pH 3)가 동일 성상의 산성물질로 처리 후 중화(pH 7)시 약품사용량이 증가되고 있었다. 응집제를 알카리 응집제로 대체하였다. 대체 후 산화조와 pH조정조에 투입되는 약품비의 57%를 절감 하였다. 또한 폐수처리 pH조절용 약품인 황산(98%)은 유독물이면서 취급자 건강상 치명적인 질병을 유발할 수 있어 이를 희염산(8%)로 대체하여 약품취급자의 약품취급 시 위험을 저감시켰다. 사업의 확장으로 폐수처리장의 처리용량을 늘려야 하는 사례가 발생하였다. 하지만 물리적인 증설 없이 처리장치 변경 및 체류시간 증가 등의 프로세스개선을 통해 종전 4,600톤/일에서 5,000톤/일로 9% 개선효과를 얻었으며 폐수처리장 증설에 필요한 투자비 20억원의 경비를 절감할 수 있었다.
Industrial wastewater generating in the metal plating process contains cyan-based, acid and alkaline wastewater. Treatment process for dealing with this wastewater is very complex and expensive. Thus, process facilities and operating costs of metal plating wastewater treatment are an important burde...
Industrial wastewater generating in the metal plating process contains cyan-based, acid and alkaline wastewater. Treatment process for dealing with this wastewater is very complex and expensive. Thus, process facilities and operating costs of metal plating wastewater treatment are an important burden on the business itself. In particular, the chemical substances used for wastewater treatment such as neutralizing agents and coagulants are hazardous to human health. It is believed that there is an increase risk in these substances. This research is carried out on the characteristics of the wastewater generating in the plating process and wastewater treatment process and problems in operation process in order to find out efficiency improvement and process optimization. The cost of chemicals used in wastewater treatment plant accounts for 85% of total operating cost. Therefore, the analysis of wastewater treatment process shows that the amount of chemicals increases when the complex of wastewater and coagulant in the same acidic condition of pH 3 is neutralized with alkaline after mixing. The use of alkaline coagulant as a substitute produces the cost savings of 40% for the coagulant. The total cost of chemicals has been reduced by 57%. Sulfuric acid is used for adjustment of pH level in wastewater treatment. Therefore, dilute hydrochloric is tested for the usage as an alternative chemical instead of sulfuric acid, reducing the risks during the chemical handling. There was a need to expand the existin gwastewater treatment plant because of production increases. The process optimization such as changes of reactor configuration, coagulant input position, and reaction time made an improvement capacity from 4,600 ton/d to 5,000ton/d and saved \ 2 billion of investment without constructing extra facilities.
Industrial wastewater generating in the metal plating process contains cyan-based, acid and alkaline wastewater. Treatment process for dealing with this wastewater is very complex and expensive. Thus, process facilities and operating costs of metal plating wastewater treatment are an important burden on the business itself. In particular, the chemical substances used for wastewater treatment such as neutralizing agents and coagulants are hazardous to human health. It is believed that there is an increase risk in these substances. This research is carried out on the characteristics of the wastewater generating in the plating process and wastewater treatment process and problems in operation process in order to find out efficiency improvement and process optimization. The cost of chemicals used in wastewater treatment plant accounts for 85% of total operating cost. Therefore, the analysis of wastewater treatment process shows that the amount of chemicals increases when the complex of wastewater and coagulant in the same acidic condition of pH 3 is neutralized with alkaline after mixing. The use of alkaline coagulant as a substitute produces the cost savings of 40% for the coagulant. The total cost of chemicals has been reduced by 57%. Sulfuric acid is used for adjustment of pH level in wastewater treatment. Therefore, dilute hydrochloric is tested for the usage as an alternative chemical instead of sulfuric acid, reducing the risks during the chemical handling. There was a need to expand the existin gwastewater treatment plant because of production increases. The process optimization such as changes of reactor configuration, coagulant input position, and reaction time made an improvement capacity from 4,600 ton/d to 5,000ton/d and saved \ 2 billion of investment without constructing extra facilities.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.