산화 염모제의 염색 원리는 모발의 팽윤, 산화, 중합반응에 의한다. 염모제의 팽윤, 산화, 중합 작용을 위해 염모제 1제와 2제에는 다양한 알칼리제, 산화제들이 함유되어 있고 이들은 팽윤과 표백, 중합 작용을 진행하면서 모발의 손상을 유발시킨다. 모발의 과도한 팽윤과 건조를 일으키는 알칼리제와 산화제의 사용이 빠르고 편리한 이유로 첨가하고 있지만 산화 염모제에 있어서 알칼리제와 산화제의 첨가로 염색력의 정도와 모발 손상 정도를 줄이는 방안에 대한 연구가 미흡하다. 이에 본 연구에서는 염색시 산화염모제의 성분들로 나타나는 모발손상의 정도를 메틸렌블루법으로 확인하였다. 실험을 위해 염색 시술 시 모발 손상의 주원인이 되는 알칼리제의 종류와 함량을 암모니아 0%. 3%, 5%, 7%, 에탄올아민 3%, 5%, 7%, ...
산화 염모제의 염색 원리는 모발의 팽윤, 산화, 중합반응에 의한다. 염모제의 팽윤, 산화, 중합 작용을 위해 염모제 1제와 2제에는 다양한 알칼리제, 산화제들이 함유되어 있고 이들은 팽윤과 표백, 중합 작용을 진행하면서 모발의 손상을 유발시킨다. 모발의 과도한 팽윤과 건조를 일으키는 알칼리제와 산화제의 사용이 빠르고 편리한 이유로 첨가하고 있지만 산화 염모제에 있어서 알칼리제와 산화제의 첨가로 염색력의 정도와 모발 손상 정도를 줄이는 방안에 대한 연구가 미흡하다. 이에 본 연구에서는 염색시 산화염모제의 성분들로 나타나는 모발손상의 정도를 메틸렌블루법으로 확인하였다. 실험을 위해 염색 시술 시 모발 손상의 주원인이 되는 알칼리제의 종류와 함량을 암모니아 0%. 3%, 5%, 7%, 에탄올아민 3%, 5%, 7%, 아르기닌 1%, 3%, 5%,와 산화제의 종류와 함량을 과산화수소 6%, 9%, 브롬산 나트륨 6%, 9% 로 다르게 하여 염모제를 제조하였다. 제1절에서는 제조한 9레벨 염모제의 하이라이트 염색력을 확인하였고 제2절에서 메틸렌블루를 이용하여 흡광도를 측정하여 모발의 손상도를 알아보았고 제3절에서는 염색 시술 시 모발의 손상을 방지하기위한 저감처리제를 도포하여 손상정도를 측정하였으며 3제형 산화 염모제를 이용하여 모발 손상을 줄이기 위한 방법을 실험하였다. 또한 염색력과 손상도가 높은 시험군에 모발 시료의 형태 분석을 위해 모표피 촬영과 인장강도, 굵기를 측정 분석한 결과 다음과 같은 결론을 얻었다. 첫째, 실험에 사용한 알칼리제의 종류와 함량 중에서 L값, a값, b값의 경우 암모니아 7%, 5%, 에탄올아민 7%, 5%가 높은 값을 보였고 산화제는 과산화수소 9%가 높은 값을 나타내 염색능력이 우수함을 확인했다. 둘째, 메틸렌블루를 이용한 모발의 손상도는 암모니아 7%, 5%, 에탄올아민 7%, 5%와 과산화수소 9%와 브롬산나트륨 9%의 혼합물에서 손상도가 높음을 관찰하였다. 셋째, 모발 손상 저감제를 처리한 시험군에서는 케라틴 트리트먼트 처리가 모발의 손상을 크게 방지하는 것을 알 수 있었다. 넷째, E-7-HP6, Am-7-HP9, E-7-SB6, Am-7-SB9의 시료군에 3제형 산화 염모제의 시술 한 결과 모발의 손상을 저감시켰고 염색능력이 우수함을 확인하였다. 다섯째, 모표피 촬영결과 알칼리제의 팽윤작용과 산화제의 표백작용에도 약간의 모표피 들뜸을 확인할 수 있었으나 전체적으로 건강한 모표피를 확인할 수 있었다. 여섯째, 인장강도 실험 결과 모발 저감처리제와 3제형 산화 염모제 방법이 인장강도를 높이는 것으로 관찰되었다. 일곱째, 모발 저감처리제와 3제형 산화 염모제 방법이 모발의 굵기가 굵어졌다. 위의 결과를 종합해 볼 때 모발의 하이라이트 염색 시술시 알칼리제의 종류와 함량, 산화제의 종류와 함량에 따라서 염색력을 높이지만 리프트 파워가 높은 시험군은 모발에 손상이 있음을 알 수 있었다. 이것은 알칼리제에 의한 모표피의 과도한 팽윤과 산화제에 의한 멜라닌 색소의 파괴에 따른 미세기공 등이 발생하여 모발에 손상을 준 것으로 사료된다. 따라서 모발의 염색시 모발손상저감처리제를 사용하여 모발의 손상을 저감시키거나 3제형 산화 염모제의 방법을 통하여 모발의 염색력은 높이고 손상을 저감시키는 방법이 적합한 시술방법으로 판단된다. 따라서 브롬산나트륨은 과산화수소와 비교했을 때 산화력은 부족하나 모발손상이 적은 산화제의 개발로 가능할 것으로 보이며, 특히 로우라이트 염색에서 두피에 자극없이 우수한 염색력을 나타낼 수 있을 거라고 사료된다. 그리고 국내에선 사용하지 않지만 3제형 산화 염모제가 활성화되어 염색 시술시 모발의 손상방지와 염색력에 충분히 도움이 될 것으로 생각된다.
산화 염모제의 염색 원리는 모발의 팽윤, 산화, 중합반응에 의한다. 염모제의 팽윤, 산화, 중합 작용을 위해 염모제 1제와 2제에는 다양한 알칼리제, 산화제들이 함유되어 있고 이들은 팽윤과 표백, 중합 작용을 진행하면서 모발의 손상을 유발시킨다. 모발의 과도한 팽윤과 건조를 일으키는 알칼리제와 산화제의 사용이 빠르고 편리한 이유로 첨가하고 있지만 산화 염모제에 있어서 알칼리제와 산화제의 첨가로 염색력의 정도와 모발 손상 정도를 줄이는 방안에 대한 연구가 미흡하다. 이에 본 연구에서는 염색시 산화염모제의 성분들로 나타나는 모발손상의 정도를 메틸렌블루법으로 확인하였다. 실험을 위해 염색 시술 시 모발 손상의 주원인이 되는 알칼리제의 종류와 함량을 암모니아 0%. 3%, 5%, 7%, 에탄올아민 3%, 5%, 7%, 아르기닌 1%, 3%, 5%,와 산화제의 종류와 함량을 과산화수소 6%, 9%, 브롬산 나트륨 6%, 9% 로 다르게 하여 염모제를 제조하였다. 제1절에서는 제조한 9레벨 염모제의 하이라이트 염색력을 확인하였고 제2절에서 메틸렌블루를 이용하여 흡광도를 측정하여 모발의 손상도를 알아보았고 제3절에서는 염색 시술 시 모발의 손상을 방지하기위한 저감처리제를 도포하여 손상정도를 측정하였으며 3제형 산화 염모제를 이용하여 모발 손상을 줄이기 위한 방법을 실험하였다. 또한 염색력과 손상도가 높은 시험군에 모발 시료의 형태 분석을 위해 모표피 촬영과 인장강도, 굵기를 측정 분석한 결과 다음과 같은 결론을 얻었다. 첫째, 실험에 사용한 알칼리제의 종류와 함량 중에서 L값, a값, b값의 경우 암모니아 7%, 5%, 에탄올아민 7%, 5%가 높은 값을 보였고 산화제는 과산화수소 9%가 높은 값을 나타내 염색능력이 우수함을 확인했다. 둘째, 메틸렌블루를 이용한 모발의 손상도는 암모니아 7%, 5%, 에탄올아민 7%, 5%와 과산화수소 9%와 브롬산나트륨 9%의 혼합물에서 손상도가 높음을 관찰하였다. 셋째, 모발 손상 저감제를 처리한 시험군에서는 케라틴 트리트먼트 처리가 모발의 손상을 크게 방지하는 것을 알 수 있었다. 넷째, E-7-HP6, Am-7-HP9, E-7-SB6, Am-7-SB9의 시료군에 3제형 산화 염모제의 시술 한 결과 모발의 손상을 저감시켰고 염색능력이 우수함을 확인하였다. 다섯째, 모표피 촬영결과 알칼리제의 팽윤작용과 산화제의 표백작용에도 약간의 모표피 들뜸을 확인할 수 있었으나 전체적으로 건강한 모표피를 확인할 수 있었다. 여섯째, 인장강도 실험 결과 모발 저감처리제와 3제형 산화 염모제 방법이 인장강도를 높이는 것으로 관찰되었다. 일곱째, 모발 저감처리제와 3제형 산화 염모제 방법이 모발의 굵기가 굵어졌다. 위의 결과를 종합해 볼 때 모발의 하이라이트 염색 시술시 알칼리제의 종류와 함량, 산화제의 종류와 함량에 따라서 염색력을 높이지만 리프트 파워가 높은 시험군은 모발에 손상이 있음을 알 수 있었다. 이것은 알칼리제에 의한 모표피의 과도한 팽윤과 산화제에 의한 멜라닌 색소의 파괴에 따른 미세기공 등이 발생하여 모발에 손상을 준 것으로 사료된다. 따라서 모발의 염색시 모발손상저감처리제를 사용하여 모발의 손상을 저감시키거나 3제형 산화 염모제의 방법을 통하여 모발의 염색력은 높이고 손상을 저감시키는 방법이 적합한 시술방법으로 판단된다. 따라서 브롬산나트륨은 과산화수소와 비교했을 때 산화력은 부족하나 모발손상이 적은 산화제의 개발로 가능할 것으로 보이며, 특히 로우라이트 염색에서 두피에 자극없이 우수한 염색력을 나타낼 수 있을 거라고 사료된다. 그리고 국내에선 사용하지 않지만 3제형 산화 염모제가 활성화되어 염색 시술시 모발의 손상방지와 염색력에 충분히 도움이 될 것으로 생각된다.
An oxidized hair dye is based on the principle of swelling, oxidation, and polymerization. A variety of alkaline and oxidizing agents are contained in an oxidized hair dye for the swelling, oxidation, and polymerization effects of a hair dye. These process of swelling, bleaching, and polymerization ...
An oxidized hair dye is based on the principle of swelling, oxidation, and polymerization. A variety of alkaline and oxidizing agents are contained in an oxidized hair dye for the swelling, oxidation, and polymerization effects of a hair dye. These process of swelling, bleaching, and polymerization cause damage to the hair. These alkaline and oxidizing agents, which cause excessive expansion and dry, are added because they are quick and easy to use. However, there is a lack of research on the ways to reduce the damage to the hair when the alkaline and oxidizing agents are used. In the present study, we have confirmed the degree of hair damage caused by oxidation hair dye with methylene blue method. For the test, we have prepared a hair dye with the type and amount of the alkali agent with ammonia 0%. 3%. 5%. 7%, ethanolamine 3%. 5%. 7%, arginine 1%. 3%. 5%, And we also prepared a hair dye with the type and amount of the oxidizing agent with hydrogen peroxide, 6% and 9%, and sodium bromate 6% and 9%. In the 1st section, we have confirmed the strength of highlight hair dyeing of level-9 hair dye. In the 2nd section, we have evaluated the degree of hair damage by measuring the absorbance using a methylene blue. In the 3rd section, we have measured the amount of damage after applying a reducing agent to prevent damage to the hair dyeing treatment. And, we have tested to reduce hair damage using the 3 step method. In addition, the results of evaluation of the hair sample of the test group with high degree of dyeing damage through cuticle photograph, tensile strength, and thickness are as follows. First, the samples that had been applied by alkaline and oxidizing agents with different types and amount showed high L*a*b* values in 3 alkaline agent types of ammonia 7%, 5%, and of ethanolamine 7%, 5% and in oxidizing agent of hydrogen peroxide 9% exhibited excellent highlight dyeing ability. Second, the damage level of hair using methylene blue exhibited high values in alkaline agent of ammonia 7%, 5% and ethanolamine 7%, 5% and in oxidizing agent of mixture of hydrogen peroxide 9% and sodium bromate 9% was measured to be high in damage level. Third, in the test group treated with the reducing agent, it was found that the hair keratin treatment process helps to prevent damage to the hair. Forth, we have treated the test groups with a lot of dyeing power and high level of hair damage, E-7-HP6, Am-7-HP9, E7-SB6, Am-7-SB9 with 3 step dyeing method and measured the absorbance using methylene blue. Result showed that the damage to the hair is reduced. It also showed that the highlight dyeing ability is excellent. Fifth, the cuticle recording results of the 4 test groups with high level of dyeing power and damage confirmed a small bleaching action of the swelling effect due to the cuticle of excitation of an alkaline agent and an oxidizing agent. But overall it was confirmed the cuticle is healthy. Sixth, the result of tensile strength test confirmed that increase the hair reducing agent and 3-step hair dye method help to increase tensile strength in the 4 test groups with high degree of dyeing power and damage. Seventh, the hair was thickest when treated with hair reducing agent and 3-step hair dyeing method in the 4 test groups with high degree of dyeing power and damage. Overall, when highlight dyeing hair, the types and amount of alkaline and oxidizing agents increase the dyeing power, and the test groups of high lift power showed damage to the hair. It is confirmed that the hair was damaged because swelling of the cuticle by the alkaline agent and the destruction of the melanin pigment by the oxidizing agent generated micropores on hair. Thus, using the hair damage reduction during dyeing of the hair or using 3-step hair dyeing method to increase dyeing power and reducing hair damage is the most suitable treatment method. In addition, although the oxidizing power and the dyeing power of sodium bromate might be lower than hydrogen peroxide, it would be feasible to develop a sodium bormate oxidizing agent that has less damage on the hair. Highlight dyeing could provide an better dyeing power without irritation to the scalp than that of the lowlight dyeing. And, although not used locally, 3-step hair dyeing method will be vitalized to help to prevent damage occurring during dyeing while maintaining dyeing power
An oxidized hair dye is based on the principle of swelling, oxidation, and polymerization. A variety of alkaline and oxidizing agents are contained in an oxidized hair dye for the swelling, oxidation, and polymerization effects of a hair dye. These process of swelling, bleaching, and polymerization cause damage to the hair. These alkaline and oxidizing agents, which cause excessive expansion and dry, are added because they are quick and easy to use. However, there is a lack of research on the ways to reduce the damage to the hair when the alkaline and oxidizing agents are used. In the present study, we have confirmed the degree of hair damage caused by oxidation hair dye with methylene blue method. For the test, we have prepared a hair dye with the type and amount of the alkali agent with ammonia 0%. 3%. 5%. 7%, ethanolamine 3%. 5%. 7%, arginine 1%. 3%. 5%, And we also prepared a hair dye with the type and amount of the oxidizing agent with hydrogen peroxide, 6% and 9%, and sodium bromate 6% and 9%. In the 1st section, we have confirmed the strength of highlight hair dyeing of level-9 hair dye. In the 2nd section, we have evaluated the degree of hair damage by measuring the absorbance using a methylene blue. In the 3rd section, we have measured the amount of damage after applying a reducing agent to prevent damage to the hair dyeing treatment. And, we have tested to reduce hair damage using the 3 step method. In addition, the results of evaluation of the hair sample of the test group with high degree of dyeing damage through cuticle photograph, tensile strength, and thickness are as follows. First, the samples that had been applied by alkaline and oxidizing agents with different types and amount showed high L*a*b* values in 3 alkaline agent types of ammonia 7%, 5%, and of ethanolamine 7%, 5% and in oxidizing agent of hydrogen peroxide 9% exhibited excellent highlight dyeing ability. Second, the damage level of hair using methylene blue exhibited high values in alkaline agent of ammonia 7%, 5% and ethanolamine 7%, 5% and in oxidizing agent of mixture of hydrogen peroxide 9% and sodium bromate 9% was measured to be high in damage level. Third, in the test group treated with the reducing agent, it was found that the hair keratin treatment process helps to prevent damage to the hair. Forth, we have treated the test groups with a lot of dyeing power and high level of hair damage, E-7-HP6, Am-7-HP9, E7-SB6, Am-7-SB9 with 3 step dyeing method and measured the absorbance using methylene blue. Result showed that the damage to the hair is reduced. It also showed that the highlight dyeing ability is excellent. Fifth, the cuticle recording results of the 4 test groups with high level of dyeing power and damage confirmed a small bleaching action of the swelling effect due to the cuticle of excitation of an alkaline agent and an oxidizing agent. But overall it was confirmed the cuticle is healthy. Sixth, the result of tensile strength test confirmed that increase the hair reducing agent and 3-step hair dye method help to increase tensile strength in the 4 test groups with high degree of dyeing power and damage. Seventh, the hair was thickest when treated with hair reducing agent and 3-step hair dyeing method in the 4 test groups with high degree of dyeing power and damage. Overall, when highlight dyeing hair, the types and amount of alkaline and oxidizing agents increase the dyeing power, and the test groups of high lift power showed damage to the hair. It is confirmed that the hair was damaged because swelling of the cuticle by the alkaline agent and the destruction of the melanin pigment by the oxidizing agent generated micropores on hair. Thus, using the hair damage reduction during dyeing of the hair or using 3-step hair dyeing method to increase dyeing power and reducing hair damage is the most suitable treatment method. In addition, although the oxidizing power and the dyeing power of sodium bromate might be lower than hydrogen peroxide, it would be feasible to develop a sodium bormate oxidizing agent that has less damage on the hair. Highlight dyeing could provide an better dyeing power without irritation to the scalp than that of the lowlight dyeing. And, although not used locally, 3-step hair dyeing method will be vitalized to help to prevent damage occurring during dyeing while maintaining dyeing power
※ AI-Helper는 부적절한 답변을 할 수 있습니다.