최근 섬유시장은 과학 기술의 발달과 소비자들의 웰빙(Well - Being) 열풍으로 다양한 신소재들이 개발되고 있으며, 관련시장이 확대되는 가운데 패션시장에서도 다양한 기능성 섬유소재가 보편화되고 있다. 슈즈의 경우도 기능성 소재를 적용하여 발의 편안함뿐만 아니라 건강과 쾌적함까지 고려한 제품들이 주목을 받고 있으며, 착용 목적에 따라 신발이 세분화되면서 통기, 투습 등의 기능을 갖춘 '기능성 신발'의 매출이 늘고 있다. 슈즈의 ...
최근 섬유시장은 과학 기술의 발달과 소비자들의 웰빙(Well - Being) 열풍으로 다양한 신소재들이 개발되고 있으며, 관련시장이 확대되는 가운데 패션시장에서도 다양한 기능성 섬유소재가 보편화되고 있다. 슈즈의 경우도 기능성 소재를 적용하여 발의 편안함뿐만 아니라 건강과 쾌적함까지 고려한 제품들이 주목을 받고 있으며, 착용 목적에 따라 신발이 세분화되면서 통기, 투습 등의 기능을 갖춘 '기능성 신발'의 매출이 늘고 있다. 슈즈의 라이닝(Lining)제는 내부의 수분을 억제하고 쾌적한 착화감을 제공하기 위해 기능성 소재의 채용이 급속히 진행되고 있으며, 최근에는 항균․방취, 소취가공을 중심으로 기능의 복합화가 이루어지고 있다. 이에 본 논문은 슈즈의 뱀프(Vamp) 및 인솔라이닝(In-Sole Lining)에 적용할 항균성 슈즈 라이닝 소재의 개발을 위해, N-Halamine의 전구체인 m-Aramid섬유의 항균성능을 연구하여, 슈즈의 내부 환경에 적합한 항균성을 갖는 슈즈 라이닝제로서의 활용 가능성을 논의하는데 그 목적을 둔다. 섬유상 물질에 존재하는 미생물의 비활성에 관한 많은 연구 중에 유기계 항균물질 중 하나인 N-Halamine의 항균성은 다양한 미생물에 대한 항균성과 비활성, 재충전이 가능하다는 장점 때문에 많은 연구가 이루어지고 있다. N-Halamine은 질소(N)와 할로겐 사이에 하나 이상의 공유결합을 가짐으로써 우수한 항균성을 가진다. N-Halamine의 전구체 중 메타형 아라미드는 염소화 반응 이후에도 할로겐 수소이탈반응이 일어나지 않는 구조라 메타형 아라미드의 아마이드기에 결합된 염소(Cl)는 안정적인 형태를 취함으로써 항균작용을 할 수 있게 된다. 슈즈 라이닝제로 염소화 된 m-Aramid섬유를 적용하여 슈즈제작이 가능한지 알아보기 위해 옥스퍼드(Oxford) 형태 중, 블러처(Blucher) 디자인의 어퍼(Upper, 갑피)를 제작해 보았다. 그 결과 뱀프와 쿼터(Quarter) 부분의 라이닝제로 염소화 된 m-Aramid섬유의 적용 가능성을 확인하였다. 또한 인솔라이닝의 앞부분에도 적용 가능할 것으로 사료되며, 운동화나 스니커즈의 경우에는 뱀프나 쿼터 부분뿐만 아니라 인솔라이닝(Insole-Lining) 전체에 적용하는 것도 가능할 것으로 사료된다. 본 논문에서 항균기능성이 우수한 슈즈 라이닝제 개발을 위해, N-Halamine의 전구체 중 m-Aramid섬유를 염소화시켜, 질병을 야기 시키는 대표적인 병원성 세균인 Staphylococcus aureus (황색포도상구균), Klebsiella pneumoniae (폐렴균)과 피부사상균 중 무좀의 원인균으로 알려진 Trichophyton mentagrophytes와 Trichophyton rubrum에 대해 물성 실험과 항균실험을 한 결과는 다음과 같다. 염소화 된 m-Aramid섬유의 표면특성과 표면에 부착된 원소를 분석하기 위하여 주사전자현미경 분석을 실시한 결과 EDS 패턴에 염소가 나타남으로써, m-Aramid섬유의 염소화를 확인하였다. 또한 X-선 광전자 측정분광기를 통해 염소화 된 m-Aramid섬유의 염소 부착량이 증가함을 확인할 수 있었다. KS K 0520(2015) 그래브법으로 인장강도를 시험한 결과 m-Aramid섬유의 인장강도보다 염소화 된 m-Aramid섬유의 인장강도가 다소 떨어지는 결과를 얻었다. 그러나 가장 낮은 결과 값을 얻은 염소화된 m-Aramid섬유의 위사 방향 인장강도 값이 약 60㎏의 힘을 견딘다는 점을 확인하여 슈즈의 라이닝제로 적용하기에 적합하다고 사료된다. KS K 0650(2011) 크로크미터법을 적용하여 건조 상태와 습윤 상태에서 염소화 된 m-Aramid섬유의 마찰견뢰도를 측정한 결과, 건조상태나 습윤상태에서 모두 4-5급을 받아 ‘신발의 안감 및 깔개’에 관한 한국산업규격에서 요구하는 값들을 만족시켰다. KS K 0693(2011) 준용하여 항균실험을 실시한 결과, 염소화 된 m-Aramid섬유는 Staphylococcus aureus (황색포도상구균)와 Klebsiella pneumoniae (폐렴균)에 대해 99.9%의 균감소율을 보임으로써 우수한 항균능력을 나타냈다. AATCC 30(2013) TEST Ⅲ을 준용하여 곰팡이에 대한 항균능력을 측정한 결과 피부사상균 중 무좀의 원인균으로 알려진 Trichophyton mentagrophytes와 Trichophyton rubrum에 대해서는 항균효과가 나타나지 않는 연구 결과를 보였다. 본 연구는 염소화 m-Aramid섬유의 물성 및 항균성을 연구함으로써 슈즈의 라이닝제로 적용 여부를 연구하였다는 것에 의의가 있다. 본 연구 결과를 고려하여, 추후 슈즈의 내부 환경에서 발생 및 번식 될 수 있는 무좀균등에 대한 항균성 연구 방법에 대한 심화된 논의가 필요할 것으로 사료된다. 이에 m-Aramid섬유를 이용한 항균섬유 개발과 항균 처리 등의 후속 연구를 제언한다.
최근 섬유시장은 과학 기술의 발달과 소비자들의 웰빙(Well - Being) 열풍으로 다양한 신소재들이 개발되고 있으며, 관련시장이 확대되는 가운데 패션시장에서도 다양한 기능성 섬유소재가 보편화되고 있다. 슈즈의 경우도 기능성 소재를 적용하여 발의 편안함뿐만 아니라 건강과 쾌적함까지 고려한 제품들이 주목을 받고 있으며, 착용 목적에 따라 신발이 세분화되면서 통기, 투습 등의 기능을 갖춘 '기능성 신발'의 매출이 늘고 있다. 슈즈의 라이닝(Lining)제는 내부의 수분을 억제하고 쾌적한 착화감을 제공하기 위해 기능성 소재의 채용이 급속히 진행되고 있으며, 최근에는 항균․방취, 소취가공을 중심으로 기능의 복합화가 이루어지고 있다. 이에 본 논문은 슈즈의 뱀프(Vamp) 및 인솔라이닝(In-Sole Lining)에 적용할 항균성 슈즈 라이닝 소재의 개발을 위해, N-Halamine의 전구체인 m-Aramid섬유의 항균성능을 연구하여, 슈즈의 내부 환경에 적합한 항균성을 갖는 슈즈 라이닝제로서의 활용 가능성을 논의하는데 그 목적을 둔다. 섬유상 물질에 존재하는 미생물의 비활성에 관한 많은 연구 중에 유기계 항균물질 중 하나인 N-Halamine의 항균성은 다양한 미생물에 대한 항균성과 비활성, 재충전이 가능하다는 장점 때문에 많은 연구가 이루어지고 있다. N-Halamine은 질소(N)와 할로겐 사이에 하나 이상의 공유결합을 가짐으로써 우수한 항균성을 가진다. N-Halamine의 전구체 중 메타형 아라미드는 염소화 반응 이후에도 할로겐 수소이탈반응이 일어나지 않는 구조라 메타형 아라미드의 아마이드기에 결합된 염소(Cl)는 안정적인 형태를 취함으로써 항균작용을 할 수 있게 된다. 슈즈 라이닝제로 염소화 된 m-Aramid섬유를 적용하여 슈즈제작이 가능한지 알아보기 위해 옥스퍼드(Oxford) 형태 중, 블러처(Blucher) 디자인의 어퍼(Upper, 갑피)를 제작해 보았다. 그 결과 뱀프와 쿼터(Quarter) 부분의 라이닝제로 염소화 된 m-Aramid섬유의 적용 가능성을 확인하였다. 또한 인솔라이닝의 앞부분에도 적용 가능할 것으로 사료되며, 운동화나 스니커즈의 경우에는 뱀프나 쿼터 부분뿐만 아니라 인솔라이닝(Insole-Lining) 전체에 적용하는 것도 가능할 것으로 사료된다. 본 논문에서 항균기능성이 우수한 슈즈 라이닝제 개발을 위해, N-Halamine의 전구체 중 m-Aramid섬유를 염소화시켜, 질병을 야기 시키는 대표적인 병원성 세균인 Staphylococcus aureus (황색포도상구균), Klebsiella pneumoniae (폐렴균)과 피부사상균 중 무좀의 원인균으로 알려진 Trichophyton mentagrophytes와 Trichophyton rubrum에 대해 물성 실험과 항균실험을 한 결과는 다음과 같다. 염소화 된 m-Aramid섬유의 표면특성과 표면에 부착된 원소를 분석하기 위하여 주사전자현미경 분석을 실시한 결과 EDS 패턴에 염소가 나타남으로써, m-Aramid섬유의 염소화를 확인하였다. 또한 X-선 광전자 측정분광기를 통해 염소화 된 m-Aramid섬유의 염소 부착량이 증가함을 확인할 수 있었다. KS K 0520(2015) 그래브법으로 인장강도를 시험한 결과 m-Aramid섬유의 인장강도보다 염소화 된 m-Aramid섬유의 인장강도가 다소 떨어지는 결과를 얻었다. 그러나 가장 낮은 결과 값을 얻은 염소화된 m-Aramid섬유의 위사 방향 인장강도 값이 약 60㎏의 힘을 견딘다는 점을 확인하여 슈즈의 라이닝제로 적용하기에 적합하다고 사료된다. KS K 0650(2011) 크로크미터법을 적용하여 건조 상태와 습윤 상태에서 염소화 된 m-Aramid섬유의 마찰견뢰도를 측정한 결과, 건조상태나 습윤상태에서 모두 4-5급을 받아 ‘신발의 안감 및 깔개’에 관한 한국산업규격에서 요구하는 값들을 만족시켰다. KS K 0693(2011) 준용하여 항균실험을 실시한 결과, 염소화 된 m-Aramid섬유는 Staphylococcus aureus (황색포도상구균)와 Klebsiella pneumoniae (폐렴균)에 대해 99.9%의 균감소율을 보임으로써 우수한 항균능력을 나타냈다. AATCC 30(2013) TEST Ⅲ을 준용하여 곰팡이에 대한 항균능력을 측정한 결과 피부사상균 중 무좀의 원인균으로 알려진 Trichophyton mentagrophytes와 Trichophyton rubrum에 대해서는 항균효과가 나타나지 않는 연구 결과를 보였다. 본 연구는 염소화 m-Aramid섬유의 물성 및 항균성을 연구함으로써 슈즈의 라이닝제로 적용 여부를 연구하였다는 것에 의의가 있다. 본 연구 결과를 고려하여, 추후 슈즈의 내부 환경에서 발생 및 번식 될 수 있는 무좀균등에 대한 항균성 연구 방법에 대한 심화된 논의가 필요할 것으로 사료된다. 이에 m-Aramid섬유를 이용한 항균섬유 개발과 항균 처리 등의 후속 연구를 제언한다.
In the recent textile market, due to the development of science technology and consumers’ Well-Being craze, the various new materials are being developed, and while the relevant market is expanding, a variety of functional fiber materials are becoming more common, even in the fashion market. In...
In the recent textile market, due to the development of science technology and consumers’ Well-Being craze, the various new materials are being developed, and while the relevant market is expanding, a variety of functional fiber materials are becoming more common, even in the fashion market. In the case of shoes, the products, considering health and pleasantness, as well as the comfort of feet, by applying the functional materials, are getting attention, and as the shoes has become subdivided depending on the wearing purpose, the sales of ‘Functional Shoes’, which have the functions such as ventilation, moisture permeability, etc., is increasing. In the materials for shoes lining, in order to suppress the internal moisture and provide the pleasant wearing feelings, adopting the functional material is progressing rapidly, and in recent years, centered around antibacterial/deodorization and deodorant process, the functional complexation is being realized. Accordingly, in order to develop the materials of antibiosis shoes lining which would be applied to vamp and In-Sole Lining of shoes, this paper puts the purpose in discussing the applicability as the material for shoes lining having the antibiosis suitable to the internal environment of shoes, by researching the antibacterial performance of m-Aramid fiber, the forerunner of N-Halamine. Among many studies on the inactivity of microorganism, in the antibiosis of N-Halamine, one of organic antibacterial substances, many studies have been conducted due to the advantages, such as antibiosis on various microorganisms, inactivity, and rechargeability. As N-Halamine has one or more covalent bond between the nitrogen and halogen, it has the excellent antibiosis. As the meta type aramid(m-Aramid) of precursors of N-Halamine has the structure where the dehydrohalogenation does not occur even after the chlorinated reaction, it could conduct the antibacterial function because the chlorine combined with amidogen of m-Aramid could take a stable form. In order to investigate whether the shoes making would be possible by applying the chlorinated m-Aramid Fiber as the material for shoes lining, Upper of Blucher design among Oxford forms was attempted to be made. As a result, the applicability m-Aramid Fiber chlorinated as the lining material of Vamp and Quarter parts could be confirmed. In addition, it is considered that it also could be applied in the front part of Insole-Lining, and that in the athletic shoes or sneakers, it would be applicable to the entire Insole-Lining, as well as Vamp or Quarter. In this paper, in order to develop the material for shoe lining whose antibacterial functionality is superior, by chlorinating m-Aramid Fiber among the precursors of N-Halamine, the results of carrying out the property experiment and antibacterial experiment on Staphylococcus aureus, and Klebsiella pneumoniae, which are the representative pathogenic bacteria causing diseases; and Trichophyton mentagrophytes and Trichophyton rubrumas, which are known as the causative organisms of athlete’s foot among dermatomyces, are as follows: In order to analyze the surface characteristics of m-Aramid Fiber and the elements attached to the surface, as a result of the implementation of scanning electron microscope analysis, as chlorine appeared in EDS pattern, the chlorination of m-Aramid Fiber was confirmed. In addition, the increase in the amount of chlorine attachments of chlorinated m-Aramid Fiber could be identified through X-ray photoelectron measurement spectroscope. As a result of the tensile strength test by utilizing KS K 0520(2015) Grab method, the findings could be gained that the tensile strength of chlorinated m-Aramid Fiber was somewhat lower than tensile strength of m-Aramid Fiber. However, as the point was confirmed that the width direction tensile strength value chlorinated m-Aramid Fiber which obtained the lowest result value could endure about 60㎏ strength, it is considered that it is appropriate to be applied as a lining material for shoes. As a result of measuring the rubbing fastness of m-Aramid Fiber chlorinated in the dried condition and wet condition by applying KS K 0650 (2011) Crock-meter method, as all got 4-5 grade in both the dried condition or wet condition, it could be said that it met the values required in Korea Industrial Standard, associated with 'shoes’ lining and insole'. As a result of the antibacterial experiment conducted by applying KS K 0693 (2011), the chlorinated m-Aramid Fiber represented the superior antibacterial ability, by showing the bacterial reduction rate of 99.9% for Staphylococcus aureus and Klebsiella pneumoniae. As a result of measuring the antibacterial ability on mold by applying AATCC 30 TEST Ⅲ, the research findings showed that the antibiotic effects did not appear for Trichophyton mentagrophytes and Trichophyton rubrum, known as the causative organisms of athlete's foot among dermatomyces. In this study, the meaning is put in that it studied whether the chlorinated m-Aramid Fiber could be applied as the lining material for shoes by researching its material properties and antibiosis. Considering the result of this study, it is thought that the deepened discussion related to the research methods of antibiosis about the athlete's foot bacteria, and so on, which could occur and breed in the internal environment of shoes, would be required in the future. Thus, the follow-up study, such as development of antimicrobial fiber, Antibacterial treatment, etc., using m-Aramid Fiber, should be suggested.
In the recent textile market, due to the development of science technology and consumers’ Well-Being craze, the various new materials are being developed, and while the relevant market is expanding, a variety of functional fiber materials are becoming more common, even in the fashion market. In the case of shoes, the products, considering health and pleasantness, as well as the comfort of feet, by applying the functional materials, are getting attention, and as the shoes has become subdivided depending on the wearing purpose, the sales of ‘Functional Shoes’, which have the functions such as ventilation, moisture permeability, etc., is increasing. In the materials for shoes lining, in order to suppress the internal moisture and provide the pleasant wearing feelings, adopting the functional material is progressing rapidly, and in recent years, centered around antibacterial/deodorization and deodorant process, the functional complexation is being realized. Accordingly, in order to develop the materials of antibiosis shoes lining which would be applied to vamp and In-Sole Lining of shoes, this paper puts the purpose in discussing the applicability as the material for shoes lining having the antibiosis suitable to the internal environment of shoes, by researching the antibacterial performance of m-Aramid fiber, the forerunner of N-Halamine. Among many studies on the inactivity of microorganism, in the antibiosis of N-Halamine, one of organic antibacterial substances, many studies have been conducted due to the advantages, such as antibiosis on various microorganisms, inactivity, and rechargeability. As N-Halamine has one or more covalent bond between the nitrogen and halogen, it has the excellent antibiosis. As the meta type aramid(m-Aramid) of precursors of N-Halamine has the structure where the dehydrohalogenation does not occur even after the chlorinated reaction, it could conduct the antibacterial function because the chlorine combined with amidogen of m-Aramid could take a stable form. In order to investigate whether the shoes making would be possible by applying the chlorinated m-Aramid Fiber as the material for shoes lining, Upper of Blucher design among Oxford forms was attempted to be made. As a result, the applicability m-Aramid Fiber chlorinated as the lining material of Vamp and Quarter parts could be confirmed. In addition, it is considered that it also could be applied in the front part of Insole-Lining, and that in the athletic shoes or sneakers, it would be applicable to the entire Insole-Lining, as well as Vamp or Quarter. In this paper, in order to develop the material for shoe lining whose antibacterial functionality is superior, by chlorinating m-Aramid Fiber among the precursors of N-Halamine, the results of carrying out the property experiment and antibacterial experiment on Staphylococcus aureus, and Klebsiella pneumoniae, which are the representative pathogenic bacteria causing diseases; and Trichophyton mentagrophytes and Trichophyton rubrumas, which are known as the causative organisms of athlete’s foot among dermatomyces, are as follows: In order to analyze the surface characteristics of m-Aramid Fiber and the elements attached to the surface, as a result of the implementation of scanning electron microscope analysis, as chlorine appeared in EDS pattern, the chlorination of m-Aramid Fiber was confirmed. In addition, the increase in the amount of chlorine attachments of chlorinated m-Aramid Fiber could be identified through X-ray photoelectron measurement spectroscope. As a result of the tensile strength test by utilizing KS K 0520(2015) Grab method, the findings could be gained that the tensile strength of chlorinated m-Aramid Fiber was somewhat lower than tensile strength of m-Aramid Fiber. However, as the point was confirmed that the width direction tensile strength value chlorinated m-Aramid Fiber which obtained the lowest result value could endure about 60㎏ strength, it is considered that it is appropriate to be applied as a lining material for shoes. As a result of measuring the rubbing fastness of m-Aramid Fiber chlorinated in the dried condition and wet condition by applying KS K 0650 (2011) Crock-meter method, as all got 4-5 grade in both the dried condition or wet condition, it could be said that it met the values required in Korea Industrial Standard, associated with 'shoes’ lining and insole'. As a result of the antibacterial experiment conducted by applying KS K 0693 (2011), the chlorinated m-Aramid Fiber represented the superior antibacterial ability, by showing the bacterial reduction rate of 99.9% for Staphylococcus aureus and Klebsiella pneumoniae. As a result of measuring the antibacterial ability on mold by applying AATCC 30 TEST Ⅲ, the research findings showed that the antibiotic effects did not appear for Trichophyton mentagrophytes and Trichophyton rubrum, known as the causative organisms of athlete's foot among dermatomyces. In this study, the meaning is put in that it studied whether the chlorinated m-Aramid Fiber could be applied as the lining material for shoes by researching its material properties and antibiosis. Considering the result of this study, it is thought that the deepened discussion related to the research methods of antibiosis about the athlete's foot bacteria, and so on, which could occur and breed in the internal environment of shoes, would be required in the future. Thus, the follow-up study, such as development of antimicrobial fiber, Antibacterial treatment, etc., using m-Aramid Fiber, should be suggested.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.