최근 들어, 고농도 미세먼지의 발생이 빈발하면서 인간의 생활환경과 환경생태계 등에 악영향을 미치고 있다. 따라서 미세먼지는 필수적으로 제어해야하는 오염물질 중의 하나이다. 최근 연구에 따르면 입자상 물질로 배출되는 먼지 외에도 배출구에서 가스로 배출되어 대기 중 차가운 공기와의 접촉으로 인해 응축되어 입자화되는 응축성 먼지(...
최근 들어, 고농도 미세먼지의 발생이 빈발하면서 인간의 생활환경과 환경생태계 등에 악영향을 미치고 있다. 따라서 미세먼지는 필수적으로 제어해야하는 오염물질 중의 하나이다. 최근 연구에 따르면 입자상 물질로 배출되는 먼지 외에도 배출구에서 가스로 배출되어 대기 중 차가운 공기와의 접촉으로 인해 응축되어 입자화되는 응축성 먼지(CPM, Condensable Particulate Matter)도 관리가 필요하다는 연구가 발표되고 있다. 응축성 먼지를 측정하는 방법으로는 냉각기와 임핀저를 이용하여 측정하는 냉각법(U.S. EPA Method 202, 2010)과 대기 중 공기와 배출가스를 대기 조건과 비슷한 조건으로 만든 뒤 희석하여 측정하는 희석법(U.S. EPA CTM-039, 2004)이 있다. 미국의 경우는 응축성 먼지 측정을 Method 202방법으로, 유럽의 경우는 ISO 25597:2013 방법을 사용하여 연구하고 있다. 그러나, 우리나라의 경우는 여과성 먼지(FPM, Filterable Particulate Matter)에 대해서는 대기오염공정시험기준(ES 01317.1)과 한국산업표준(KS I ISO 9096:2009)이 마련되어 있지만, 응축성 먼지 측정 방법이 마련되어 있지 않아 응축성 먼지에 대한 측정 방법을 정립하기 위하여 많은 연구가 필요한 실정이다. 본 연구의 배출원은 가정용 보일러로 응축성 먼지를 측정 방법 별로 비교하기 위하여 응축성 먼지의 전구물질인 SO2의 농도를 자동차용 경유와 선박용 경유(MGO, 황 0.5% 이하)를 희석하여 0 ppm, 40 ppm, 80 ppm, 120 ppm으로 변화시키면서 측정하였다. 배기가스 중 SO2의 농도가 각각 0 ppm, 40 ppm, 80 ppm, 120 ppm 일 때, 희석법의 응축성 먼지 농도는 0.010 mg/m3, 0.014 mg/m3, 0.023 mg/m3, 0.034 mg/m3, 냉각법의 응축성 먼지 농도는 0.576 mg/m3, 1.212 mg/m3, 2.912 mg/m3, 4.612 mg/m3으로 냉각법이 희석법에 비해 약 57 ~ 134배 높게 측정되었다.
최근 들어, 고농도 미세먼지의 발생이 빈발하면서 인간의 생활환경과 환경생태계 등에 악영향을 미치고 있다. 따라서 미세먼지는 필수적으로 제어해야하는 오염물질 중의 하나이다. 최근 연구에 따르면 입자상 물질로 배출되는 먼지 외에도 배출구에서 가스로 배출되어 대기 중 차가운 공기와의 접촉으로 인해 응축되어 입자화되는 응축성 먼지(CPM, Condensable Particulate Matter)도 관리가 필요하다는 연구가 발표되고 있다. 응축성 먼지를 측정하는 방법으로는 냉각기와 임핀저를 이용하여 측정하는 냉각법(U.S. EPA Method 202, 2010)과 대기 중 공기와 배출가스를 대기 조건과 비슷한 조건으로 만든 뒤 희석하여 측정하는 희석법(U.S. EPA CTM-039, 2004)이 있다. 미국의 경우는 응축성 먼지 측정을 Method 202방법으로, 유럽의 경우는 ISO 25597:2013 방법을 사용하여 연구하고 있다. 그러나, 우리나라의 경우는 여과성 먼지(FPM, Filterable Particulate Matter)에 대해서는 대기오염공정시험기준(ES 01317.1)과 한국산업표준(KS I ISO 9096:2009)이 마련되어 있지만, 응축성 먼지 측정 방법이 마련되어 있지 않아 응축성 먼지에 대한 측정 방법을 정립하기 위하여 많은 연구가 필요한 실정이다. 본 연구의 배출원은 가정용 보일러로 응축성 먼지를 측정 방법 별로 비교하기 위하여 응축성 먼지의 전구물질인 SO2의 농도를 자동차용 경유와 선박용 경유(MGO, 황 0.5% 이하)를 희석하여 0 ppm, 40 ppm, 80 ppm, 120 ppm으로 변화시키면서 측정하였다. 배기가스 중 SO2의 농도가 각각 0 ppm, 40 ppm, 80 ppm, 120 ppm 일 때, 희석법의 응축성 먼지 농도는 0.010 mg/m3, 0.014 mg/m3, 0.023 mg/m3, 0.034 mg/m3, 냉각법의 응축성 먼지 농도는 0.576 mg/m3, 1.212 mg/m3, 2.912 mg/m3, 4.612 mg/m3으로 냉각법이 희석법에 비해 약 57 ~ 134배 높게 측정되었다.
Recently, the episode of high concentrations of fine particle has been adversely affecting the human environment and the ecosystem. Thus, fine particle is one of the essential pollutants to control. Recent studies have said that Condensable particulate matter(CPM), the particle that is condensed int...
Recently, the episode of high concentrations of fine particle has been adversely affecting the human environment and the ecosystem. Thus, fine particle is one of the essential pollutants to control. Recent studies have said that Condensable particulate matter(CPM), the particle that is condensed into particles when gas contact with cold air in the atmosphere, also need to be managed in addition to the particle released as a particulate matter. There are two methods to measure the CPM; The cold impinger method (U.S. EPA Method 202, 2010), which measures the CPM with condenser and impingers, and the dilution method (CTM-039, U.S. EPA, 2004), which measures the diluted CPM under the similar atmospheric conditions, the air and the exhaust gas, to real atmosphere. Method 202 is used as the CPM measurement in the United States and ISO 25597:2013 method in Europe. There is a measurement for Filterable Particulate Matter (FPM), air pollution standard (ES 01317.1) and Korean Industrial Standards(KS I ISO 9096:2009), but there is no specific measurement method to measure the CPM in Korea. That is why researches on the CPM measurement method are needed. To compare the results of the cooling method and the dilution method with the domestic boiler, this research measured the concentration of SO2, a precursor of the CPM, mixing diesel for automobiles and MGO(sulfur 0.5%) to 0, 40, 80, 120 ppm. When the concentration of SO2 in exhaust gas is 0, 40, 80, 120 ppm, the CPM concentration of dilution method is 0.010 mg/m³, 0.014 mg/m³, 0.023 mg/m³ and 0.034 mg/m³, while the CPM concentration of cold impinger method is 0.576 mg/m³, 1.212 mg/m³, 2.912 mg/m³ and 4.612 mg/m³. The study has found that the cooling method showed about 57~134 times higher result than the dilution method.
Recently, the episode of high concentrations of fine particle has been adversely affecting the human environment and the ecosystem. Thus, fine particle is one of the essential pollutants to control. Recent studies have said that Condensable particulate matter(CPM), the particle that is condensed into particles when gas contact with cold air in the atmosphere, also need to be managed in addition to the particle released as a particulate matter. There are two methods to measure the CPM; The cold impinger method (U.S. EPA Method 202, 2010), which measures the CPM with condenser and impingers, and the dilution method (CTM-039, U.S. EPA, 2004), which measures the diluted CPM under the similar atmospheric conditions, the air and the exhaust gas, to real atmosphere. Method 202 is used as the CPM measurement in the United States and ISO 25597:2013 method in Europe. There is a measurement for Filterable Particulate Matter (FPM), air pollution standard (ES 01317.1) and Korean Industrial Standards(KS I ISO 9096:2009), but there is no specific measurement method to measure the CPM in Korea. That is why researches on the CPM measurement method are needed. To compare the results of the cooling method and the dilution method with the domestic boiler, this research measured the concentration of SO2, a precursor of the CPM, mixing diesel for automobiles and MGO(sulfur 0.5%) to 0, 40, 80, 120 ppm. When the concentration of SO2 in exhaust gas is 0, 40, 80, 120 ppm, the CPM concentration of dilution method is 0.010 mg/m³, 0.014 mg/m³, 0.023 mg/m³ and 0.034 mg/m³, while the CPM concentration of cold impinger method is 0.576 mg/m³, 1.212 mg/m³, 2.912 mg/m³ and 4.612 mg/m³. The study has found that the cooling method showed about 57~134 times higher result than the dilution method.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.