가스크로마토그래피 질량분석기(GC/MS)를 이용한 스타이렌 올리고머의 정량 분석에 관한 연구 A study on the Quantitative Analysis of Styrene Oligomers Using Gas Chromatography Mass Spectrometer원문보기
플라스틱으로 인한 환경오염은 아주 중요한 환경적 문제이다. 하지만 플라스틱 에서 유래 또는 침출될 수 있는 유해물질에 관한 체계적인 연구는 많이 보고된 바가 없다. 이 연구의 목적은 가장 흔하게 사용되는 플라스틱 종류인 폴리스타이 렌(Polystyrene)에서 발생되는 여러 가지 스타이렌 올리고머 (Styrene Oligomers, SOs)를 환경에서 용이하고 효과적으로 ...
플라스틱으로 인한 환경오염은 아주 중요한 환경적 문제이다. 하지만 플라스틱 에서 유래 또는 침출될 수 있는 유해물질에 관한 체계적인 연구는 많이 보고된 바가 없다. 이 연구의 목적은 가장 흔하게 사용되는 플라스틱 종류인 폴리스타이 렌(Polystyrene)에서 발생되는 여러 가지 스타이렌 올리고머 (Styrene Oligomers, SOs)를 환경에서 용이하고 효과적으로 모니터링(Monitoring)하기 위 한 분석법을 개발 및 고안하는 것이다. 이를 위해 다양한 표준물질을 기기분석의 내부표준물질(Internal Standard)로 적절한지를 알아보고, SOs를 가스크로마토그 래피에서 정량하는데 가장 알맞은 내부표준물질을 선정하였다. 실험결과, Styrene monomer (SM)의 내부표준물질로는 Acenaphthene-d10 (A-d10), 2,4,6-triphenyl-1-hexene (ST-1), 1,3-diphenyl propane (SD-1), 2,4-diphenyl-1-butene (SD-3), trans-1,2-diphenyl cyclobutane (SD-4)의 내부표준물질로는 Phenanthrene-d10 (P-d10), 1,3,5-triphenylcyclohexane-Isomer mix (A Isomer mixture of 1e,3e,5a-triphenylcyclohexane and 1e,3e,5e-triphenylcyclohexane, ST-6mix), 1e-phenyl-4e-(1´-phenylethyl)tetralin(ST-5) 1a-phenyl-4e-(1´-phenylethyl)tetralin(ST-3)의 내부표준물질로는 4-Terphenyl-d14 (T-d14)을 각각 선정하여 정량하는 것이 효과적이라는 것을 알았다. 회수율 실험은 선택된 내부표준물질 및 실험방법에 대한 검증을 위해 수행되었으며, 측정된 SOs 회수율 실험결과는 통상적인 회수율 허용범위(80% ~ 120%)에 모두 적합한 것으로 나타났다. 그리고 고안 및 개발된 SOs 분석법을 실제 환경시료에 직접 적용하여, 제주도에 위치한 해안의 해양모래와 해수에서의 SOs 농도를 측정하였다. 그 결과, 이 연구는 환경에서 PS 플라스틱 오염의 영향 을 평가하는데 기여할 것으로 생각된다.
플라스틱으로 인한 환경오염은 아주 중요한 환경적 문제이다. 하지만 플라스틱 에서 유래 또는 침출될 수 있는 유해물질에 관한 체계적인 연구는 많이 보고된 바가 없다. 이 연구의 목적은 가장 흔하게 사용되는 플라스틱 종류인 폴리스타이 렌(Polystyrene)에서 발생되는 여러 가지 스타이렌 올리고머 (Styrene Oligomers, SOs)를 환경에서 용이하고 효과적으로 모니터링(Monitoring)하기 위 한 분석법을 개발 및 고안하는 것이다. 이를 위해 다양한 표준물질을 기기분석의 내부표준물질(Internal Standard)로 적절한지를 알아보고, SOs를 가스크로마토그 래피에서 정량하는데 가장 알맞은 내부표준물질을 선정하였다. 실험결과, Styrene monomer (SM)의 내부표준물질로는 Acenaphthene-d10 (A-d10), 2,4,6-triphenyl-1-hexene (ST-1), 1,3-diphenyl propane (SD-1), 2,4-diphenyl-1-butene (SD-3), trans-1,2-diphenyl cyclobutane (SD-4)의 내부표준물질로는 Phenanthrene-d10 (P-d10), 1,3,5-triphenylcyclohexane-Isomer mix (A Isomer mixture of 1e,3e,5a-triphenylcyclohexane and 1e,3e,5e-triphenylcyclohexane, ST-6mix), 1e-phenyl-4e-(1´-phenylethyl)tetralin(ST-5) 1a-phenyl-4e-(1´-phenylethyl)tetralin(ST-3)의 내부표준물질로는 4-Terphenyl-d14 (T-d14)을 각각 선정하여 정량하는 것이 효과적이라는 것을 알았다. 회수율 실험은 선택된 내부표준물질 및 실험방법에 대한 검증을 위해 수행되었으며, 측정된 SOs 회수율 실험결과는 통상적인 회수율 허용범위(80% ~ 120%)에 모두 적합한 것으로 나타났다. 그리고 고안 및 개발된 SOs 분석법을 실제 환경시료에 직접 적용하여, 제주도에 위치한 해안의 해양모래와 해수에서의 SOs 농도를 측정하였다. 그 결과, 이 연구는 환경에서 PS 플라스틱 오염의 영향 을 평가하는데 기여할 것으로 생각된다.
Plastic pollution is an important issue in the environment. However, there are few systematic studies on the harmful substances that can be leached out from plastics. The objective of this study is to improve a method for monitoring various styrene oligomers (SOs) derived from polysty...
Plastic pollution is an important issue in the environment. However, there are few systematic studies on the harmful substances that can be leached out from plastics. The objective of this study is to improve a method for monitoring various styrene oligomers (SOs) derived from polystyrene (PS), one of the major plastics. To achieve this goal, In this study, extraction and concentration methods were modified to reduce the analysis time and to improve the convenience of the analysis procedure. also, selected new internal standard (IS) materials for better quantitative monitoring of SOs. Through a series of experiments, Acenaphthene-d10 (Ace-d10) was the most appropriate IS to quantify styrene monomer (SM). Phenanthrene-d10 (Phe-d10) was an appropriate IS for 1,3-diphenyl propane (SD-1), 2,4-diphenyl-1-butene (SD-3), trans-1,2-diphenyl cyclobutane (SD-4), and 2,4,6-triphenyl-1-hexene (ST-1). In addition, 4-Terphenyl-d14 (4-ter-d14) was appropriate as an IS for monitoring 1a-phenyl-4e-(1´-phenylethyl)tetralin (ST-3), 1e-phenyl-4e-(1´-phenylethyl)tetralin (ST-5) and 1,3,5-triphenylcyclohexane-Isomer mix (A Isomer mixture of 1e,3e,5a-triphenylcyclohexane and 1e,3e,5e-triphenylcyclohexane, ST-6mix). Recovery tests were conducted to verify selected ISs, which ranged from 80% to 120%. Then, improved SOs analysis method was applied to the seawater and sand samples of Jeju Island coast to measure SOs. As a result, this study is expected to contribute to the assessment of the impact of PS plastic contamination in the environment.
Plastic pollution is an important issue in the environment. However, there are few systematic studies on the harmful substances that can be leached out from plastics. The objective of this study is to improve a method for monitoring various styrene oligomers (SOs) derived from polystyrene (PS), one of the major plastics. To achieve this goal, In this study, extraction and concentration methods were modified to reduce the analysis time and to improve the convenience of the analysis procedure. also, selected new internal standard (IS) materials for better quantitative monitoring of SOs. Through a series of experiments, Acenaphthene-d10 (Ace-d10) was the most appropriate IS to quantify styrene monomer (SM). Phenanthrene-d10 (Phe-d10) was an appropriate IS for 1,3-diphenyl propane (SD-1), 2,4-diphenyl-1-butene (SD-3), trans-1,2-diphenyl cyclobutane (SD-4), and 2,4,6-triphenyl-1-hexene (ST-1). In addition, 4-Terphenyl-d14 (4-ter-d14) was appropriate as an IS for monitoring 1a-phenyl-4e-(1´-phenylethyl)tetralin (ST-3), 1e-phenyl-4e-(1´-phenylethyl)tetralin (ST-5) and 1,3,5-triphenylcyclohexane-Isomer mix (A Isomer mixture of 1e,3e,5a-triphenylcyclohexane and 1e,3e,5e-triphenylcyclohexane, ST-6mix). Recovery tests were conducted to verify selected ISs, which ranged from 80% to 120%. Then, improved SOs analysis method was applied to the seawater and sand samples of Jeju Island coast to measure SOs. As a result, this study is expected to contribute to the assessment of the impact of PS plastic contamination in the environment.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.