이 연구의 목적은 두피에 균일한 치료 선량을 전달할 수 있는 맞춤형 헬멧 볼루스를 개발하는 것이다. 볼루스를 제작하기 위해 인체 머리 팬톰을 기준으로 열성형가면과 파라핀을 이용하였다. 맞춤형 헬멧 볼루스의 유효성을 분석하기 위해서 인체 머리 팬톰을 사용하여 볼루스를 사용한 경우와 사용하지 않은 경우 2가지로 구분하여 ...
이 연구의 목적은 두피에 균일한 치료 선량을 전달할 수 있는 맞춤형 헬멧 볼루스를 개발하는 것이다. 볼루스를 제작하기 위해 인체 머리 팬톰을 기준으로 열성형가면과 파라핀을 이용하였다. 맞춤형 헬멧 볼루스의 유효성을 분석하기 위해서 인체 머리 팬톰을 사용하여 볼루스를 사용한 경우와 사용하지 않은 경우 2가지로 구분하여 체적조절호형방사선치료 계획을 만들었다. 맞춤형 헬멧 볼루스의 유효 밀도는 두 정부, 후두부, 오른쪽, 왼쪽 측 두부 순서로 0.92 g/㎤, 0.81 g/㎤, 0.81 g/㎤, 0.92 g/㎤로 확인되었다. 치료 계획의 선량 체적 히스토그람을 비교함으로써 임상표적체적, 뇌, 두개골, 안구, 수정체 순서로 평균 99.3%, 56.8%, 63.9%, 13.1%, 9.4%의 선량이 볼루스를 사용했을 때 전달됐고 볼루스를 사용하지 않았을 때의 경우 89%, 83.1%, 58.1%, 26.9%, 17%으로 확인되었다. 두 정부, 후두부, 오른쪽, 왼쪽 측 두부에서의 광유도발광선량계를 이용한 실제측정에서는 각각 102.5±1.4%, 101.5±1.8%, 95.9±1.9%, 81.8±2.1%의 선량이 볼루스를 사용하였을 때 측정되었고 볼루스를 사용하지 않았을 경우에는 59.6±2.4%, 112.6±1.8%, 47.1±1.6%, 53.1±2.3%으로 나타났다. 결론적으로 열성형가면과 파라핀을 이용하여 만들어진 맞춤형 헬멧 볼루스는 두피 방사선치료 시 효과적인 역할을 할 수 있다.
이 연구의 목적은 두피에 균일한 치료 선량을 전달할 수 있는 맞춤형 헬멧 볼루스를 개발하는 것이다. 볼루스를 제작하기 위해 인체 머리 팬톰을 기준으로 열성형가면과 파라핀을 이용하였다. 맞춤형 헬멧 볼루스의 유효성을 분석하기 위해서 인체 머리 팬톰을 사용하여 볼루스를 사용한 경우와 사용하지 않은 경우 2가지로 구분하여 체적조절호형방사선치료 계획을 만들었다. 맞춤형 헬멧 볼루스의 유효 밀도는 두 정부, 후두부, 오른쪽, 왼쪽 측 두부 순서로 0.92 g/㎤, 0.81 g/㎤, 0.81 g/㎤, 0.92 g/㎤로 확인되었다. 치료 계획의 선량 체적 히스토그람을 비교함으로써 임상표적체적, 뇌, 두개골, 안구, 수정체 순서로 평균 99.3%, 56.8%, 63.9%, 13.1%, 9.4%의 선량이 볼루스를 사용했을 때 전달됐고 볼루스를 사용하지 않았을 때의 경우 89%, 83.1%, 58.1%, 26.9%, 17%으로 확인되었다. 두 정부, 후두부, 오른쪽, 왼쪽 측 두부에서의 광유도발광선량계를 이용한 실제측정에서는 각각 102.5±1.4%, 101.5±1.8%, 95.9±1.9%, 81.8±2.1%의 선량이 볼루스를 사용하였을 때 측정되었고 볼루스를 사용하지 않았을 경우에는 59.6±2.4%, 112.6±1.8%, 47.1±1.6%, 53.1±2.3%으로 나타났다. 결론적으로 열성형가면과 파라핀을 이용하여 만들어진 맞춤형 헬멧 볼루스는 두피 방사선치료 시 효과적인 역할을 할 수 있다.
The study aimed to develop a custom-made helmet bolus that could deliver a uniform therapeutic dose in the scalp, minimize air gaps, and improve reproducibility for patient care. To fabricate a bolus, a humanoid head phantom was placed over the head and then shaped to overlay the thermoplastic m...
The study aimed to develop a custom-made helmet bolus that could deliver a uniform therapeutic dose in the scalp, minimize air gaps, and improve reproducibility for patient care. To fabricate a bolus, a humanoid head phantom was placed over the head and then shaped to overlay the thermoplastic mask with melted paraffin. To analyze the custom-made bolus effectiveness, we established the volumetric modulated arc therapy (VMAT) plans with/without the bolus using humanoid head phantom. The custom-made bolus effective densities were measured with 0.92 g/㎤, 0.81 g/㎤, 0.81 g/㎤, and 0.92 g/㎤ at the VX, PO, RT, and LT points, which were the positions for OSLD dose measurements. By comparing the DVHs from the plans, CTV, brain, skull, eye, and lens were identified to average dose in the order of 99.3%, 56.8%, 63.9%, 13.1%, and 9.4% in using bolus. 89%, 83.1%, 58.1%, 26.9%, and 17% were confirmed in without bolus. The OSLD measurements doses at the four points of VX, PO, RT, and LT were 102.5±1.4%, 101.5±1.8%, 95.9±1.9%, and 81.8±2.1% in using bolus. 59.6±2.4%, 112.6±1.8%, 47.1±1.6%, and 53.1±2.3% were confirmed in without bolus. In conclusion, the custom-made bolus using a thermoplastic mask and paraffin could play an effective role in scalp treatment.
The study aimed to develop a custom-made helmet bolus that could deliver a uniform therapeutic dose in the scalp, minimize air gaps, and improve reproducibility for patient care. To fabricate a bolus, a humanoid head phantom was placed over the head and then shaped to overlay the thermoplastic mask with melted paraffin. To analyze the custom-made bolus effectiveness, we established the volumetric modulated arc therapy (VMAT) plans with/without the bolus using humanoid head phantom. The custom-made bolus effective densities were measured with 0.92 g/㎤, 0.81 g/㎤, 0.81 g/㎤, and 0.92 g/㎤ at the VX, PO, RT, and LT points, which were the positions for OSLD dose measurements. By comparing the DVHs from the plans, CTV, brain, skull, eye, and lens were identified to average dose in the order of 99.3%, 56.8%, 63.9%, 13.1%, and 9.4% in using bolus. 89%, 83.1%, 58.1%, 26.9%, and 17% were confirmed in without bolus. The OSLD measurements doses at the four points of VX, PO, RT, and LT were 102.5±1.4%, 101.5±1.8%, 95.9±1.9%, and 81.8±2.1% in using bolus. 59.6±2.4%, 112.6±1.8%, 47.1±1.6%, and 53.1±2.3% were confirmed in without bolus. In conclusion, the custom-made bolus using a thermoplastic mask and paraffin could play an effective role in scalp treatment.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.