현대인이 가장 선호하는 유약 중 하나는 바로 결정유약이다. 이러한 결정유약은 1270℃ 이상의 고온에서 소성되며, 냉각 시의 온도 변화에 따른 결정이 생성되는 것으로 알려져 있다. 하지만 복잡한 공정 과정의 결과로 만들어지는 결정유약은 상업화에 있어 많은 한계를 가진다.
Augite 결정은 (Ca,Na)(Mg,Fe,Al,Ti)(Si,Al)2O6의 ...
현대인이 가장 선호하는 유약 중 하나는 바로 결정유약이다. 이러한 결정유약은 1270℃ 이상의 고온에서 소성되며, 냉각 시의 온도 변화에 따른 결정이 생성되는 것으로 알려져 있다. 하지만 복잡한 공정 과정의 결과로 만들어지는 결정유약은 상업화에 있어 많은 한계를 가진다.
Augite 결정은 (Ca,Na)(Mg,Fe,Al,Ti)(Si,Al)2O6의 화학식을 가지며 화성암과 변성암에서 흔히 발견되는 휘석(Pyroxene)그룹에 속한다. Augite계 blue결정 및 pink결정을 개발하기 위하여 발색단으로서의 코발트 산화물의 역할은 중요하다. 그러나 코발트 산화물의 가격이 점점 가격이 상승함에 따라 많은 양의 코발트를 사용하여 유약을 만드는 작업은 비용적인 면에서 큰 부담으로 작용하고 있다. 따라서 본 연구의 목적은 적은 양의 코발트계 안료와 코발트 산화물을 사용하여 1250℃로 소성 온도를 낮춤과 동시에, 공정의 단순화와 생산비 절감을 통하여 소비자들의 선호도가 높은 Augite계 blue 및 pink 결정유약을 개발하는 데 초점을 두었다.
연구 결과 Augite 결정유약의 최적 소성 온도는 1250℃에서 1시간 유지하여 자연 냉각하는 것으로 나타났다. 코발트계 안료 H575 1wt.%를 첨가할 때 결정유약의 최적 조합비는 인도소다장석 70wt.%, 금산석회석 20wt.%, 중국활석 10wt.%로 나타났고, 산화물 Co3O4 1.2wt.%와 12 wt.% 첨가의 경우 부여장석60wt.%, 금산석회석30wt.%, 중국활석10 wt.%이다.
소성된 유약을 XRD 분석한 결과 (24-0203/Ca(Mg,Fe)SiO6)의 Augite 결정상으로 나타났다. UV 색상 분석 결과 발색 안료(H575) 1wt.% 첨가의 경우 L*a*b* 값은 각각 58.38, 7.33, -18.96이며 blue Color로 발색되었다. 발색 산화물(Co3O4) 12wt.%에서는 L*a*b* 값은 각각 45.81, 6.51, -13.87이며 Pink Color로 발색되었다. 또한, 발색 산화물(Co3O4) 1.2wt.%에서는 L*a*b* 값은 각각 42.29, 13.35, -13.87이며 blueish puple Color로 발색되었다.
현대인이 가장 선호하는 유약 중 하나는 바로 결정유약이다. 이러한 결정유약은 1270℃ 이상의 고온에서 소성되며, 냉각 시의 온도 변화에 따른 결정이 생성되는 것으로 알려져 있다. 하지만 복잡한 공정 과정의 결과로 만들어지는 결정유약은 상업화에 있어 많은 한계를 가진다.
Augite 결정은 (Ca,Na)(Mg,Fe,Al,Ti)(Si,Al)2O6의 화학식을 가지며 화성암과 변성암에서 흔히 발견되는 휘석(Pyroxene)그룹에 속한다. Augite계 blue결정 및 pink결정을 개발하기 위하여 발색단으로서의 코발트 산화물의 역할은 중요하다. 그러나 코발트 산화물의 가격이 점점 가격이 상승함에 따라 많은 양의 코발트를 사용하여 유약을 만드는 작업은 비용적인 면에서 큰 부담으로 작용하고 있다. 따라서 본 연구의 목적은 적은 양의 코발트계 안료와 코발트 산화물을 사용하여 1250℃로 소성 온도를 낮춤과 동시에, 공정의 단순화와 생산비 절감을 통하여 소비자들의 선호도가 높은 Augite계 blue 및 pink 결정유약을 개발하는 데 초점을 두었다.
연구 결과 Augite 결정유약의 최적 소성 온도는 1250℃에서 1시간 유지하여 자연 냉각하는 것으로 나타났다. 코발트계 안료 H575 1wt.%를 첨가할 때 결정유약의 최적 조합비는 인도소다장석 70wt.%, 금산석회석 20wt.%, 중국활석 10wt.%로 나타났고, 산화물 Co3O4 1.2wt.%와 12 wt.% 첨가의 경우 부여장석60wt.%, 금산석회석30wt.%, 중국활석10 wt.%이다.
소성된 유약을 XRD 분석한 결과 (24-0203/Ca(Mg,Fe)SiO6)의 Augite 결정상으로 나타났다. UV 색상 분석 결과 발색 안료(H575) 1wt.% 첨가의 경우 L*a*b* 값은 각각 58.38, 7.33, -18.96이며 blue Color로 발색되었다. 발색 산화물(Co3O4) 12wt.%에서는 L*a*b* 값은 각각 45.81, 6.51, -13.87이며 Pink Color로 발색되었다. 또한, 발색 산화물(Co3O4) 1.2wt.%에서는 L*a*b* 값은 각각 42.29, 13.35, -13.87이며 blueish puple Color로 발색되었다.
One of the most favored glaze of modern people is the crystal glaze. These crystal glaze is fired at a high temperature of 1270°C or higher, and it is known that crystals are produced according to temperature changes during cooling. However, the crystal glaze created as a result of the complex proce...
One of the most favored glaze of modern people is the crystal glaze. These crystal glaze is fired at a high temperature of 1270°C or higher, and it is known that crystals are produced according to temperature changes during cooling. However, the crystal glaze created as a result of the complex process has many limitations in commercialization. Augite crystals have the formula of (Ca,Na)(Mg,Fe,Al,Ti)(Si,Al)2O6 and belong to the Pyroxene group commonly found in igneous and metamorphic rocks. The role of cobalt oxide as a chromophore is important in order to develop Augite-based blue crystals and pink crystals. However, as the price of cobalt oxide gradually increases, making glaze using a large amount of cobalt requires too much cost. For this reason, the purpose of this study is to develop Augustite-based blue and pink crystal glaze, which is highly preferred by consumers, by lowering the firing temperature to 1250°C using a small amount of cobalt-based pigments and cobalt oxides, while simplifying the process and reducing production costs. As a result of the study, it was found that the optimal firing temperature of the Augite crystal glaze was maintained at 1250°C for 1 hour and naturally cooled. When 1 wt.% of cobalt-based pigment H575 was added, the optimal combination ratio of crystal glaze was 70 wt.% of Indian soda feldspar, 20 wt.% of Geumsan limestone, and 10 wt.% of Chinese talc. For the addition of 1.2 wt.% and 12 wt.% of oxide Co3O4, the optimum ratio is 60 wt.% of Buyeo feldspar, 30 wt.% of Geumsan limestone, and 10 wt.% of Chinese talc. As a result of XRD analysis of the fired glaze, the crystal phase was found to be an Augite crystal phase of (24-0203/Ca(Mg,Fe)SiO6). As a result of UV color analysis, the L*a*b* values were 58.38, 7.33 and -18.96 for the addition of 1 wt.% of color pigments (H575), respectively, and were colored blue. At 12 wt.% of the colored oxide (Co3O4), the L*a*b* values were 45.81, 6.51, and -13.87, respectively, and were colored as Pink Color.
One of the most favored glaze of modern people is the crystal glaze. These crystal glaze is fired at a high temperature of 1270°C or higher, and it is known that crystals are produced according to temperature changes during cooling. However, the crystal glaze created as a result of the complex process has many limitations in commercialization. Augite crystals have the formula of (Ca,Na)(Mg,Fe,Al,Ti)(Si,Al)2O6 and belong to the Pyroxene group commonly found in igneous and metamorphic rocks. The role of cobalt oxide as a chromophore is important in order to develop Augite-based blue crystals and pink crystals. However, as the price of cobalt oxide gradually increases, making glaze using a large amount of cobalt requires too much cost. For this reason, the purpose of this study is to develop Augustite-based blue and pink crystal glaze, which is highly preferred by consumers, by lowering the firing temperature to 1250°C using a small amount of cobalt-based pigments and cobalt oxides, while simplifying the process and reducing production costs. As a result of the study, it was found that the optimal firing temperature of the Augite crystal glaze was maintained at 1250°C for 1 hour and naturally cooled. When 1 wt.% of cobalt-based pigment H575 was added, the optimal combination ratio of crystal glaze was 70 wt.% of Indian soda feldspar, 20 wt.% of Geumsan limestone, and 10 wt.% of Chinese talc. For the addition of 1.2 wt.% and 12 wt.% of oxide Co3O4, the optimum ratio is 60 wt.% of Buyeo feldspar, 30 wt.% of Geumsan limestone, and 10 wt.% of Chinese talc. As a result of XRD analysis of the fired glaze, the crystal phase was found to be an Augite crystal phase of (24-0203/Ca(Mg,Fe)SiO6). As a result of UV color analysis, the L*a*b* values were 58.38, 7.33 and -18.96 for the addition of 1 wt.% of color pigments (H575), respectively, and were colored blue. At 12 wt.% of the colored oxide (Co3O4), the L*a*b* values were 45.81, 6.51, and -13.87, respectively, and were colored as Pink Color.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.