초록

AI-Helper

본 논문에서는 고체상호간 미끄름접촉에 의해 발생하는 진동과 소음의 특성을 조사하기 위해서 실험과 이론해석을 행하였다. 미끄름접촉과 관련된 소음에는 brake squeal 혹은 wheel screech등과 같이 stick-slip 형태의 동적 불안정 상태와 관련이 있는 squeal noise와, 겉보기로 동적 안정 상태에 있으나 미끄름접촉면간에 내재하는 미끄름접촉 고유의 불규칙한 동특성에 기인하여 발생하는 rubbing noise가 있다. 본 연구의 대상은 보다 기본적인 형태인 후자에 한한다.

Abstract ▼ AI-Helper

The results of measurements showing normal vibrations and rubbing noise generated during unlubricated smooth sliding between metal surfaces are presented. The measurements were made on pin-on-disc type apparatus instrumented with piezoelectric acceleration transducers and microphones. Spectral analy...

The results of measurements showing normal vibrations and rubbing noise generated during unlubricated smooth sliding between metal surfaces are presented. The measurements were made on pin-on-disc type apparatus instrumented with piezoelectric acceleration transducers and microphones. Spectral analysis of the both signals up to frequency of 10kHz indicates that they are closely correlated. The major components of both signals in this frequency range are primarily associated with the normal contact vibrations which are excited by surface irregularities being swept through the contact region during sliding. As an approximation to the seismic input of surface irregularities, an effective surface wavenumber spectrum was assumed in the form of an inverse vibration and noise measurements for a number of surface finishes and mean loads. The predominant frequency component of which levels of the normal vibration and noise are close to overall levels of the both signals is induced by contact resonance between the two bodies and its frequency can be calculated from the Hertzian theory.