본 연구는 로봇착유기 개발을 위한 기초연구로서 유두위치 측정장치와 로봇제어 시스템을 구성하고 그 성능을 분석하고자 수행되었으며 그 결과는 다음과 같다. 1. 유두인식은 스테레오 측량법에 기초한 이미지 장치로 처리했으며 유두인식오차는 (x, y, z) = (0.83, 1.95, 0.81)mm이다. RCS로 좌표값을 변환했을 때 시스템 전체의 오차는 x = 0.9mm, y = 2.0mm, z = 0.9mm였다. 2. 로봇 유두컵 착탈 시스템의 로봇 착탈 성공률은 평균 91.5%로 나타났다. 작업시간은 27.8sec였으며, 이미지 처리를 포함한 전체 작업시간은 86.1sec로 나타났다.
본 연구는 로봇착유기 개발을 위한 기초연구로서 유두위치 측정장치와 로봇제어 시스템을 구성하고 그 성능을 분석하고자 수행되었으며 그 결과는 다음과 같다. 1. 유두인식은 스테레오 측량법에 기초한 이미지 장치로 처리했으며 유두인식오차는 (x, y, z) = (0.83, 1.95, 0.81)mm이다. RCS로 좌표값을 변환했을 때 시스템 전체의 오차는 x = 0.9mm, y = 2.0mm, z = 0.9mm였다. 2. 로봇 유두컵 착탈 시스템의 로봇 착탈 성공률은 평균 91.5%로 나타났다. 작업시간은 27.8sec였으며, 이미지 처리를 포함한 전체 작업시간은 86.1sec로 나타났다.
The objective of this study was to determine the teat locations and to develop a teat cup handling system operated by a robot. The results of this study were summarized as follows: 1. The teat cup attaching and detaching operation system developed in this study consists of a control computer, a five...
The objective of this study was to determine the teat locations and to develop a teat cup handling system operated by a robot. The results of this study were summarized as follows: 1. The teat cup attaching and detaching operation system developed in this study consists of a control computer, a five-dimensional robot(PERFORMER-MK2), a DC servo gripper, a robot controller, two CCD-cameras (WV-vp410), an image grabber board(DT3153), a model cow, and a teat cup unit. 2. The coordinates of teat locations were measured by a stereo image processing unit. The error ranges of teats coordinates measured were (x, y, z) = (0.83, 1.95, 0.81) mm. When those were transferred into the Robot Coordinate System(RCS) coordinate, the total error ranges measured were x = 0.9 mm, y = 2.0 mm, z = 0.9 mm. 3. The rates of success of teat cup attaching and detaching operation by a robot system were 91.5% on average; the operation time needed were 27.8 sec. Total working hours for the teat cup handling including image processing were 86.1 sec.
The objective of this study was to determine the teat locations and to develop a teat cup handling system operated by a robot. The results of this study were summarized as follows: 1. The teat cup attaching and detaching operation system developed in this study consists of a control computer, a five-dimensional robot(PERFORMER-MK2), a DC servo gripper, a robot controller, two CCD-cameras (WV-vp410), an image grabber board(DT3153), a model cow, and a teat cup unit. 2. The coordinates of teat locations were measured by a stereo image processing unit. The error ranges of teats coordinates measured were (x, y, z) = (0.83, 1.95, 0.81) mm. When those were transferred into the Robot Coordinate System(RCS) coordinate, the total error ranges measured were x = 0.9 mm, y = 2.0 mm, z = 0.9 mm. 3. The rates of success of teat cup attaching and detaching operation by a robot system were 91.5% on average; the operation time needed were 27.8 sec. Total working hours for the teat cup handling including image processing were 86.1 sec.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.