다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기
大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. B. B, v.26 no.2 = no.197, 2002년, pp.269 - 277
김윤호 (고려대학교 대학원 기계공학과) , 이규정 (고려대학교 기계공학과)
AI-Helper
Experiments on the evaporation heat transfer and pressure drop in the brazed type plate heat exchangers were performed using refrigerants R410A and R22. To investigate the geometric effect, plate heat exchangers with the same pitch and height but different 45
Buonopane, R. A., Troupe, R. A. and Morgan, J. C., 1963, 'Heat Transfer Design Method for Plate Heat Exchngers,' Chem. Eng. Prog., Vol. 59, No. 7, pp. 57-61
Cooper, A. and Usher, J. D., 1983, Heat Exchanger Design Handbook, Chap. 3.7, Hemisphere publishing, New York
Kandikar, S. G. and Shah, R. K., 1989, 'Multipass Plate Heat Exchangers Effectiveness-NTU Results and Guidelines for Selecting Pass Arrangements,' ASME Journal of Heat Transfer, Vol. 111, pp. 300-313
Bogaert, R. and Bloes, A., 1995, 'Global Performance of a Prototype Brazed Plate Heat Exchanger in a Large Reynolds Number Range,' Experimental Heat Transfer, Taylor & Francis, No. 8, pp. 293-311
Holger Martin, 1996, 'A Theoretical Approach to Predict the Performance of Chevron-type Plate Heat Exchangers,' Chemical Engineering and Processing 35, pp. 301-310
Muley, A. and Manglik, R. M., 1999, 'Experimental Study of Turbulent Flow Heat Transfer ;Pressure Drop in a Plate Heat Exchanger with Chevron Plates,' ASME Journal of Heat Transfer, Vol. 121, pp. 110-117
Yan, Y.Y., Lio, H.C. and Lin,T.F., 1998, 'Condensation Heat Transfer and Pressure Drop of Refrigerant R134A in a Plate Heat Exchanger,' Int. Journal of Heat and Mass Transfer 42, pp. 993-1006
Yan, Y.Y., Lin, T.F., 1999, 'Evaporation Heat Transfer and Pressure Drop of Refrigerant R134A in a Plate Heat Exchanger,' ASME Journal of Heat Transfer, Vol. 121, pp. 118-126
Kim, Y.S. and Lee, J.H., 1998, 'An Experimental Study on Evaporation Heat Transfer Characteristics and Pressure Drop in Plate Heat Exchanger,' SAREC pp. 746-751
Kline, S. J. and McClintock, F. A., 1953, 'Describing Uncertainties in Single-Sample Experiments,' Mech. Eng., Vol. 75, No. 1, pp. 3-12
Hewitt, G. F., and Roberts, D. N., 1969, 'Studies of Two-Phase Flow Patterns by Simultaneous Flash and X-Ray Phtography,' AERE-M2159
Bennett, J. A. R., Collier, R. J .G., Pratt, H. R. C. and Thornton, J. D., 1961, 'Heat Transfer to Two-Phase Gas-liqid Systems-part1,' Trans. Instn. Chem. Engrs. (London), 3(1961) 113
Schrock V. E. and Grossman 1962, 'Fluid Convection Boiling in Tubes,' Nuclear Science and Engineering, Vol. 12, No. 4, pp. 471-481
Gungor K. E. and Winterton R. H. S., 1986, 'A General Correlation for Flow Boilng in Tubes and Annuli,' Int. J. Heat Mass Transfer, Vol. 29, No. 3, pp. 351-358
Kandlikar S. G., 1990, 'A General Correlation for Saturated Two-Phase Flow Boilng Heat Transfer Inside Horizontal and Vertical Tubes,' Journal of heat transfer, Vol. 112, pp. 219-228
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.