최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. B. B, v.38 no.11 = no.350, 2014년, pp.881 - 887
박장민 (영남대학교 기계공학부) , 윤석호 (한국기계연구원 열공정극한기술연구실) , 이공훈 (한국기계연구원 열공정극한기술연구실) , 송찬호 (한국기계연구원 열공정극한기술연구실)
This paper presents numerical study on flow and heat transfer characteristics in micro-gap plate heat exchanger. In particular, we investigate the effect of flow inertia on the flow distribution from single main channel to multiple parallel micro-gaps. The flow regime of the main channel is varied f...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
마이크로채널 열교환기의 특성은? | 마이크로채널 열교환기는 적은 부피로도 높은 열전달 성능을 얻을 수 있어, 화학공정, 발전 플랜트, 마이크로 열유체 시스템 등에서 많은 관심을 받아왔다. 이에 따라 마이크로채널 열교환기의 열전달 성능과 압력 손실에 대한 많은 연구들이 진행되어 왔다. | |
Micro-gap 열교환기에서 에너지소비와 연관된 중요한 요소는? | Micro-gap 열교환기에서 압력손실은 에너지소비와 연관된 중요한 요소이다. Micro-gap 입구(Гi)와 출구(Гo)의 압력차를 Fig. | |
micro-gap 판형 열교환기의 유동 분배에 대한 기초적인 연구 결과는 무엇인가? | 본 연구에서는 micro-gap 판형 열교환기의 유동 분배에 대한 기초적인 연구를 수행하였다. 해석 결과 유동관성이 유동분배 및 온도분포에 큰 영향을 미치며, 따라서 열교환 성능의 최적화에 중요한 요소로 작용할 수 있을 것으로 생각된다. 또한 다양한 Re 에 대한 micro-gap 판형 열교환기 성능 실험에 있어서 엄밀한 결과를 얻기 위해서는 유동 분배의 불균일을 최소화 할 수 있는 헤더를 도입하는 것이 중요할 것으로 생각된다. |
Liu, S., Zhang, Y. and Liu, P., 2007, "Heat Transfer and Pressure Drop in Fractal Microchannel Heat Sink for Cooling of Electronic Chips," Heat and Mass Transfer, Vol. 44, pp. 221-227.
Lu, B., Meng, W. J. and Mei, F., 2012, "Microelectronic Chip Cooling: an Experimental Assessment of a Liquid-Passing Heat Sink, a Microchannel Heat Rejection Module, and a Microchannel-Based Recirculating-Requid Cooling System," Microsystem Technologies, Vol. 18, pp. 341-352.
Kim, D., Yu, C.-H., Yoon, S. H. and Choi, J. S., 2011, "Effects of Manifold Geometries on Flow Distribution to Parallel Microchannels," Journal of Mechanical Science and Technology, Vol. 12, pp. 3069-3074.
Hetsroni, G., Mosyak, A., Pogrebnyak, E. and Yarin, L. P., 2005, "Fluid Flow in Micro-Channels," International Journal of Heat and Mass Transfer, Vol. 48, pp. 1982-1998, 2005.
Hetsroni, G., Mosyak, A., Pogrebnyak, E. and Yarin, L. P., 2005, "Heat Transfer in Micro-Channels: Comparison of Experiments with Theory and Numerical Results," International Journal of Heat and Mass Transfer, Vol. 48, pp. 5580-5601.
Dang, T. and Teng, J.-T., 2011, "Comparisons of the Heat Transfer and Pressure Drop of the Microchannel and Minichannel Heat Exchangers," Heat and Mass Transfer, Vol. 47, pp. 1311-1322.
Park, H. S. and Punch, J., 2008, "Friction Factor and Heat Transfer in Multiple Microchannels with Uniform Flow Distribution," International Journal of Thermal Sciences, Vol. 51, pp. 4535-4543.
Morini, G. L., 2004, "Single-Phase Convection Heat Transfer in Microchannels: a Review of Experimental Results," International Journal of Thermal Sciences, Vol. 43, pp. 631-651.
Steinke, M. E. and Kandlikar, S. G., 2010, "Single- Phase Liquid Friction Factors in Microchannels," International Journal of Thermal Sciences, Vol. 45, pp. 1073-1083.
Dang, T., Teng, J.-T. and Chu, J.-C., 2010 "A Study on the Simulation and Experiment of a Microchannel Counter-Flow Heat Exchanger," Applied Thermal Engineering, Vol. 30, pp. 2163-2172.
Chein, R. and Chen, J., 2009, "Numerical Study of the Inlet/Outlet Arrangement Effect on Microchannel Heat Sink Performance," International Journal of Thermal Sciences, Vol. 48, pp. 1627-1638.
Gunnasegaran, P., Mohammed, H. A., Shuaib, N. H. and Saidur, R., 2010, "The Effect of Geometrical Parameters on Heat Transfer Characteristics of Microchannel Heat Sink with Different Shape," International Communications in Heat and Mass Transfer, Vol. 37, pp. 1078-1086.
Liu, J.-T., Peng, X.-F. and Yan, W.-M., 2007, "Numerical Study of Fluid Flow and Heat Transfer in Microchannel Cooling Passages," International Journal of Heat and Mass Transfer, Vol. 50, pp. 1855-1864.
Cho, E. S., Choi, J. W., Yoon, J. S. and Kim, M. S., 2010, "Modeling and Simulation on the Mass Flow Distribution in Microchannel Heat Sinks with Non- Uniform Heat Flux Conditions," International Journal of Heat and Mass Transfer, Vol. 53, pp. 1341-1348.
Kang, M. K., Shin, J. H., Lee, H.-H. and Chun, K., 2005, "Analysis of Laminar Convective Heat Transfer in Micro Heat Exchanger for Stacked Multi-Chip Module," Microsystem Technologies, Vol. 11, pp. 1176-1186.
Tonomura, O., Tanaka, S., Noda, M., Kano, M., Hasebe, S. and Hashimoto, I., 2004, "CFD-Based Optimal Design of Manifold in Plate-Fin Microdevices," Chemical Engineering Journal, Vol. 101, pp. 397-402, 2004.
Commenge, J. M., Falk, L., Corrious, J. P. and Matlosz, M., 2002, "Optimal Design for Flow Uniformity in Microchannel Reactors," AIChE Journal, Vol. 48, pp. 345-358.
Guan, N., Liu, Z.-G. and Zhang, C.-W., 2012, "Numerical Investigation on Heat Transfer of Liquid Flow at Low Reynolds Number in Microcylinder- Groups," Heat and Mass Transfer, Vol. 48, pp. 1141-1153.
Ryu, J. H., Choi, D. H. and Kim, S. J., 2003, "Three-Dimensional Numerical Optimization of a Manifold Microchannel Heat Sink," International Journal of Heat and Mass Transfer, Vol. 46, pp. 1553-1562.
Pope, S. P., 2000, Turbulent Flows, Cambridge University Press.
Menter, F. R., 1994, "Two-Equation Eddy-Viscosity Turbulence Models for Engineering Applications," AIAA Journal, Vol. 32, pp. 1596-1605.
Kandlikar, S. G., Schmitt, D., Carrano, A. L. and Taylor, J. B., 2005, "Characterization of Surface Roughness Effects on Pressure Drop in Single-Phase Flow in Minichannels," Physics of Fluids, Vol. 17, 100606
Webb, R. L., Eckert, E. R. G., and Goldstein, R. J., 1971, "Heat Transfer and Friction in Tubes with Repeated-Rib Roughness," International Journal of Heat and Mass Transfer, Vol. 14, pp. 601-617.
Bergman, T. L., Lavine, A. S., Incropera, F. P. and Dewitt, D. P., 2011, Fundamentals of Heat and Mass Transfer, John Wiley & Sons. Inc., 7th Ed.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.