최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국전산유체공학회지 = Journal of computational fluids engineering, v.7 no.3 = no.18, 2002년, pp.17 - 26
류창국 (한국과학기술원 기계공학과) , 최상민 (한국과학기술원 기계공학과)
Computational fluid dynamic(CFD) analysis has been frequently applied to the waste incinerators to understand the flow performance for various design and operating parameters. Since the computational modeling inevitably requires many simplifications and complicated sub-models, validity of the result...
Eaton, A.M. et al., 'Components, Formulations, Solutions, Evaluation, and Application of Comprehensive Combustion Models,' Progress in Energy and Combust. Sci., 25 (1999), p.387
Nasserzadeh, V. et al., 'Effect of High Speed Secondary Air Jets on the Overall Performance of a Large MSW Incinerator with a Vertical Shaft,' Combust. Sci. and Tech., 92 (1993), p.389
Nasserzadeh, V. et al., 'Effects of High Speed Jets and Internal Baffes on the Gas Residence Times in Large Municipal Incinerators,' Environmental Progress, 13-2(1994), p.124-133
Kim, S. et al., 'Comparative Evaluation of Municipal Solid Waste Incinerator Designs by Flow Simulation,' Combust. and Flame, 106 (1996), p.241
Shin, D. et al., 'Computational Fluid Dynamics Evaluation of Good Combustion Performance in Waste Incinerators,' J. of the Air and Waste Management Association, 48 (1998), 0.345
Ryu, C. and Choi, S., 'Design Consideration for the Cross Jet Air Mixing in the MSW Incinerators,' Int. Journal of Energy Research, 21 (1997), p.695
Ryu, C. and Choi, S., '3D Simulation on Jet Air Mixing in the Municipal Solid Waste Incinerators,' Combust. Sci. and Tech., 119(1996), p.155
Madsen, O.H. et al., 'Modern Design Technologies for Thermal Optimisation and Pollutant Control in MSW Incinerator Plants,' The 1st Int. Symp. on Incineration and Flue Gas Treatment Technologies (1997)
Weber, R. et al., 'Experimental and Numerical Studies on Reburn Jet Penetration and Mixing with Applicadon to Boilers and Municipal Waste Incinerators,' J. of the Institute of Energy, 71 (1998), p.94
김전황, '스토커형 소각로의 연소특성 및 연소모델에 관한 연구,' 대한기계학회논문집B,22-5 (1998), p.627
권이, '화학반응을 고려한 스토커식 소각로의 3차원 모사연구,' HWAHAK KONGHAK, 36-3 (1998), p.353
Klasen, T., and G $\ddot{O}$ rner, K., 'Numerical Simulation and Optimisation of a LargeMunicipal Solid Waste Incinerator Plant,' The 2nd Int. Symp. on Incineration and Flue Gas Treatment Technologies (1999)
Riccius, 0. et al., 'Design of Waste Incinerators Utilising CFD,' The 2nd Int. Symp. on Incineration and Flue Gas Treatment Technologies (1999)
박이서, 외 1인 '도시 폐기물 소각로 파일롯 플랜트 실험을 통한 연소실 해석 모델 설정 및 결과 고찰,' 한국폐기물학회 춘계학술대회 (1999), p.131
이박윤, 외 2인, '상업용 소각로 연소실 성능 예측을 위한 수치해석 연구,' 한국연소학회지, 4-1 (1999), p.141
Chen, K. S. et al., 'Three Dimensional Combustion Modeling in Municipal Solid Waste Incinerator,' J. of Environmental Engineering, 125-2 (1999), p.166
이허김, 외 2인, '중간류식 폐기물 소각로 연소실의 최적형상 설계를 위한 유동해석,' 대한기계학회논문집B, 25-2 (2001), p.252
Kori, Y. and Takeya, R., 'Cross Jet Mixing and Its Effects on Combustion Performance in MSW Incinerators with Natural Gas Reburning,' The 3rd Int. Symp. on Incineration and Flue Gas Treatment Technologies (2001)
P $\'e$ rillex, M. et al., 'Optimisation of Boiler Design for the Largest MSW Incineration Unit in Belgium and Expehence with the 'SEGHERS-IBB PRISM' as Improvement for Boiler Performance,' The 3rd Int. Symp. on Incineration and Flue Gas Treatment Technologies (2001)
Ryu, C. et al., 'Combined Bed Combustion and Gas Flow Simulation for a Grate Type Incinerator,' J. of the Air and Waste Mangagement Association, 52 (2002), p.189
Choudhury, D. 'Introduction to the Renormalization Group Method and Turbulence Modeling' Technical Merno TM-107, Fluent Inc. (1993)
Kim, S. and Choudhury, D., 'A Near-wall Treatment Using Wall Functions Sensitized to Pressure Gradient' in ASME FED Vo1.217, Separated and Complex Flows, ASME (1995)
Magnussen, B. F. and Hjertager, B. H., 'On Mathematical Models of Turbulent Combustion with Special Emphasis on Soot Formation and Combustion,' The 16th Int. Symp. on Combustion (1976), p.719
Raithby, G. D. and Chui, E. H., 'A Finite Volume Method for Predicting a Radiant Heat Transfer in Enclosures with Participating Media,' J. of Heat Transfer, 112, (1990), p.415
Howard, J. B. et al., 'Kinetics of Carbon Monoxide Oxidation in Postflame Gases,'The 14th Int. Symp. on Combustion (1973),P.975
Coppalle, A. and Vervisch, P. 'The Total Emissivities of High Temperature Flames,'Combust. Flame, 49, (1983), p. 101
Santos, A.M and Collin, R., 'Study of a MSW Incinerator: Overall Operation and On-site Measurements over the Grate,'National Waste Processing Conference Proceedings, ASME (1992), p.133
김신류, 외1인, '소각로내 열유동의 계산과 실험,' 한국폐기물학회 논문집, 11-4 (1994), p.545
Shin, D. and Choi, S., 'The Combustion of Simulated Waste Particles in a Fixed Bed,' Combust. and Flame, 121 (2000), p.167
Fujii, T. et al., 'The Fuzzy Automatic Combustion Control System for Reducing CO from Flue Gas of the Refuse Incinerator,' Hitachi Zosen Technical Review, 53 2 (1992), p.78
Yang, Y.B. et al., 'Mathematical Modelling of Solid Combustion on a Travelling Bed and the Effect of Channelling,' The 3rd Int. Symp. on Incineration and Flue Gas Treatment Technologies (2001)
※ AI-Helper는 부적절한 답변을 할 수 있습니다.