최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국지진공학회논문집 = Journal of the Earthquake Engineering Society of Korea, v.7 no.3 = no.31, 2003년, pp.47 - 55
김진구 (성균관대학교 건축공학과) , 최현훈 (성균관대학교 건축공학과) , 원영섭 (성균관대학교 건축공학과)
This study proposed a convenient seismic design procedure for buckling-restrained braced frames based on the equivalent energy concept. The design process begins with the computation of input energy from response spectrum. Then the elastic energy and plastic energy are computed based on the equal en...
Priestley, M. J. N., and Kowalsky, M. J., “Direct displacement-based seismic dsign of concrete buildings,” Bulletin of the New Zealand National Society for Earthquake Engineering, Vol. 33, No. 4, 2000, pp. 421-444.
Chopra, A. K. and Goel, R. K., “Direct displacement-based design: Use of inelastic vs. elastic design spectra,” Earthquake Spectra, Vol. 17, No. 1, 2001, pp. 47-64.
Housner, George, “Limit design of structures to resist earthquakes,” Proceedings of the First World Conference on Earthquake Engineering, Berkeley, California, 1956.
Riddell, R. and Garcia, J. E., “Hysteretic energy spectrum and damage control,” Earthquake Engineering and Structural Dynamics, Vol. 30, No. 12, 2001, pp. 1791-1816.
Wong, K. K. F. and Pang, M., “Generation and application of energy density spectra,” Seventh U.S. National Conference on Earthquake Engineering, Boston, Massachusetts, 2002.
Uang, C. M. and Bertero, V. V., “Use of energy as a design criterion in earthquake-resistant design,” Report No. UCB/EERC-88/18, Earthquake Engineering Research Center, University of California at Berkeley, 1988.
Leger, P. and Dussault, S., “Seismic-energy dissipation in MDOF structures,” Journal of Structural Engineering, Vol. 118, No. 5, 1992, pp. 1251-1269.
Estes, K. R. and Anderson, J. C. “Hysteretic energy demands in multistory buildings,” Seventh U.S. National Conference on Earthquake Engineering, Boston, Massachusetts, 2002.
Akbas, B., Shen, J., and Hao, H., “Energy approach in performance-based seismic design of steel moment resisting frames for basic safety objective,” The Structural Design of Tall Buildings, Vol. 10, 2001, pp. 193-217.
Leelataviwat, S., Goel, S.C., and Stojadinovi?, B., “Energy-based seismic design of structures using yield mechanism and target drift,” Journal of Structural Engineering, Vol. 128, No. 8, 2002, pp. 1046-1054.
Chou, C. C., and Uang, C. M., “A procedure for evaluating seismic energy demand of framed structures,” Earthquake Engineering and Structural Dynamics, Vol. 32, No. 2, 2003, pp. 229-244.
Newmark, N. M. and Hall, W. J., Earthquake spectra and design, Earthquake Engineering Research Institute, Oakland, California, 1982.
한국지진공학회, 내진설계기준연구 (II), 1997.
ATC, “Seismic Evaluation and Retrofit of Concrete Buildings,” ATC-40, Applied Technology Council, Redwood City, California, 1996.
Tsai, K. C. and Li, J. W., “DRAIN2D+, A general purpose computer program for static and dynamic analyses of inelastic 2D structures supplemented with a graphic processor,” Report No. CEER/R86-07, National Taiwan University, Taipei, Taiwan, 1997.
Mahin, S. A. and Lin, J., Inelastic response spectra for single degree of freedom systems, Dept. of Civil Engineering, University of California, Berkeley, 1983.
Vanmarcke, E. H. and Gasparini, D. A., A program for artificial motion generation, user's manual and documentation, Dept. of Civil Engineering, Massachusetts Institute of Technology, 1976.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.