$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

등가 에너지 개념을 이용한 비좌굴 가새골조의 내진설계
Seismic Design of Buckling-Restrained Braced frame Using Equivalent Energy Concept 원문보기

한국지진공학회논문집 = Journal of the Earthquake Engineering Society of Korea, v.7 no.3 = no.31, 2003년, pp.47 - 55  

김진구 (성균관대학교 건축공학과) ,  최현훈 (성균관대학교 건축공학과) ,  원영섭 (성균관대학교 건축공학과)

초록
AI-Helper 아이콘AI-Helper

본 연구에서는 등가 에너지 개념에 근거하여 비좌굴 가새골조의 간편한 내진설계방법을 제안하였다. 단자유도계로 치환된 구조물의 지진 입력에너지를 응답 스펙트럼으로부터 구한 후, 탄성에너지와 소성에너지를 등가 에너지 개념을 이용하여 산정한다. 이렇게 구한 소성에너지를 분배비에 따라 각 층에 분배하고, 모든 소성에너지는 가새에 의하여 소산된다고 가정하여 각 가새의 단면적을 산정할 수 있다. 제안된 방법을 검증하기 위하여 3층, 6층, 20층 가새골조를 제안된 방법으로 주어진 목표변위를 만족하도록 설계하고, 인공지진을 이용하여 결과를 검증하였다. 해석결과에 의하면 저층 건물의 최상층 변위는 비교적 목표변위를 만족하였으나, 20층 건물의 최상층 변위는 목표변위보다 매우 작아 가새가 과다하게 설계된 것으로 나타났다.

Abstract AI-Helper 아이콘AI-Helper

This study proposed a convenient seismic design procedure for buckling-restrained braced frames based on the equivalent energy concept. The design process begins with the computation of input energy from response spectrum. Then the elastic energy and plastic energy are computed based on the equal en...

주제어

참고문헌 (17)

  1. Priestley, M. J. N., and Kowalsky, M. J., “Direct displacement-based seismic dsign of concrete buildings,” Bulletin of the New Zealand National Society for Earthquake Engineering, Vol. 33, No. 4, 2000, pp. 421-444. 

  2. Chopra, A. K. and Goel, R. K., “Direct displacement-based design: Use of inelastic vs. elastic design spectra,” Earthquake Spectra, Vol. 17, No. 1, 2001, pp. 47-64. 

  3. Housner, George, “Limit design of structures to resist earthquakes,” Proceedings of the First World Conference on Earthquake Engineering, Berkeley, California, 1956. 

  4. Riddell, R. and Garcia, J. E., “Hysteretic energy spectrum and damage control,” Earthquake Engineering and Structural Dynamics, Vol. 30, No. 12, 2001, pp. 1791-1816. 

  5. Wong, K. K. F. and Pang, M., “Generation and application of energy density spectra,” Seventh U.S. National Conference on Earthquake Engineering, Boston, Massachusetts, 2002. 

  6. Uang, C. M. and Bertero, V. V., “Use of energy as a design criterion in earthquake-resistant design,” Report No. UCB/EERC-88/18, Earthquake Engineering Research Center, University of California at Berkeley, 1988. 

  7. Leger, P. and Dussault, S., “Seismic-energy dissipation in MDOF structures,” Journal of Structural Engineering, Vol. 118, No. 5, 1992, pp. 1251-1269. 

  8. Estes, K. R. and Anderson, J. C. “Hysteretic energy demands in multistory buildings,” Seventh U.S. National Conference on Earthquake Engineering, Boston, Massachusetts, 2002. 

  9. Akbas, B., Shen, J., and Hao, H., “Energy approach in performance-based seismic design of steel moment resisting frames for basic safety objective,” The Structural Design of Tall Buildings, Vol. 10, 2001, pp. 193-217. 

  10. Leelataviwat, S., Goel, S.C., and Stojadinovi?, B., “Energy-based seismic design of structures using yield mechanism and target drift,” Journal of Structural Engineering, Vol. 128, No. 8, 2002, pp. 1046-1054. 

  11. Chou, C. C., and Uang, C. M., “A procedure for evaluating seismic energy demand of framed structures,” Earthquake Engineering and Structural Dynamics, Vol. 32, No. 2, 2003, pp. 229-244. 

  12. Newmark, N. M. and Hall, W. J., Earthquake spectra and design, Earthquake Engineering Research Institute, Oakland, California, 1982. 

  13. 한국지진공학회, 내진설계기준연구 (II), 1997. 

  14. ATC, “Seismic Evaluation and Retrofit of Concrete Buildings,” ATC-40, Applied Technology Council, Redwood City, California, 1996. 

  15. Tsai, K. C. and Li, J. W., “DRAIN2D+, A general purpose computer program for static and dynamic analyses of inelastic 2D structures supplemented with a graphic processor,” Report No. CEER/R86-07, National Taiwan University, Taipei, Taiwan, 1997. 

  16. Mahin, S. A. and Lin, J., Inelastic response spectra for single degree of freedom systems, Dept. of Civil Engineering, University of California, Berkeley, 1983. 

  17. Vanmarcke, E. H. and Gasparini, D. A., A program for artificial motion generation, user's manual and documentation, Dept. of Civil Engineering, Massachusetts Institute of Technology, 1976. 

저자의 다른 논문 :

관련 콘텐츠

오픈액세스(OA) 유형

GOLD

오픈액세스 학술지에 출판된 논문

저작권 관리 안내
섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로