최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.20 no.6 = no.147, 2003년, pp.123 - 129
송준엽 (한국기계연구원 지능형정밀기계연구부) , 박태원 (부경대 대학원) , 재덕근 (제산정공사) , 정영득 (부경대학교)
Recently, the life cycle of products is rapidly shortened and then the disposal of the used mold applied in development of the product is a difficult thing. In this study, we proposed the feasibility of new three plate type mold structure for recycling by analyzing of the existing standard mold base...
吉田 弘美, '金型標準化の進め方,' 金型技術 제 2 권, 제 6 호, pp. 18-28, 1987
彦坂 高司, '段取りの 合理化と金型の標準化,' 金型技術,' 제 2 권, 제 6 호, pp. 47-53, 1987
김태수, 노형민, '금형부품의 표준화 및 조립용이화를 위한 설계기술개발,' 월간금형, pp. 103-107, Sep. 1989
Jeong, Y.D., Song, J. Y., et al., 'Mold base Structure and standardization for recycling,' Conference of KSPE, pp. 373-376, May 2000
Song, J. Y., Je, D. K., 'A Structure of injection mold for recycling,' Korea patent 0344901, July 3, 2002
Menges, G., Mohren, P., 'How to make injection molds,' Hanser, pp. 381-383, 1993
Menges, G., Mohren, P., How to Make Injection Mold, Hanser Publishers, 1993
Jeong, Y. D., Song,J . Y. et al., 'Mold structure using 3 plate type mold base for recycling,' Conference of KSPE, pp. 92-96, 2001
Potsch, G., Michaeli, W., Injection Molding, Hanser Publishers, 1995
유영식, 조정희, 천병은, 사출금형이론, 한국산업인력공단, pp. 88-92, 1999
Kishin, 표준 몰드베이스 금형용 부품, 기신정기주식회사, pp. 549-619, 2001
Face, 'Misumi pastic die standard components,' pp. 549-619, April 1996
Cumsa catalogue, 'Correders slides,' Barcelona Spainl. 2000
Hasco Catalogue, 'Standard element,' Printed in W.-Gernany
한국금형공업협동조합, 몰드베이스 표준규격집, 1992
※ AI-Helper는 부적절한 답변을 할 수 있습니다.