참고문헌 (20)

1. Darwin, D., 'Reirforced concrete. in finite element analysis of reinforced concrete II,' ASCE, 1993, pp.203-232 

2. 권민호, 조창근, '구속응력을 받는 콘크리트 구조물 해석을 위한 콘크리트 구성모델', 콘크리트학회지, 15권, 3호, 2003, pp.433-442 

   원문보기 상세보기

3. Gerstle, K.H., 'Behavior of concrete under multiaxial stress states,' J. of Engrg. Mech. Div., ASCE, Vol.106, No.6, 1980, pp.1383-1403 

4. Darwin, D. and Pecknold, D.A., 'Nonlinear biaxial stress-strain law for concrete,' J. Engrg. Mech Div., ASCE, Vol.103, No.2, 1977, pp.229-241 

5. Lekhnitskii, S.G., 'Theory of elasticity of an anisotropic elastic body,' Julius Journal Brandstatter ed., Holden Day, Inc., San Francisco, CA, 1963 

6. Kwon, M, 'Three dimensional finite element analysis of reinforced concrete members,' Ph.D dissertation, Dept. of Civil, Environmental, and Architectural Engineering, University of Colorado at Boulder, 2000 

7. Popovics, S., 'Numerical approach to the complete stress-strain relation for concrete,' Cement and Concrete Research, Vol.3, No.5, 1973, pp.583-599 

   상세보기

8. Saenz, I.P., 'Discussion of 'Equation for the Stress-strain curve of concrete,' by P. Desay and S. Krishan, ACI Journal, Vol.61, No.9, 1964, pp.1229-1235 

9. Willam, K.J. and Warnke, E.P., 'Constitutive model for fhe triaxial behavior of concrete,' Int. Association for Bridge and Struct. Engrg. Proc, Vol.19, 1975, pp.1-30 

10. Menetrey, Ph. and Willam, KJ., 'Thaxial failure criterion for concrete and its generalization,' ACI Structural Journal, Vol.92, No.3, 1995, pp.311-318 

11. Comit $\'{e}$ Euro-International du B $\'{e}$ ton, 'Concrete under multi-axial states of stress constitutive equations for practical design,' Bulletine d'Information 156, 1983 

12. Simth, S.S., Willam, KJ., Gerstle, K.H., and Sture, S., 'Concrete over the top, or: is there life after peak?' ACI Journal, Vol.86, No.5, 1989, pp.491-497 

13. Gerstle, K.H., 'Simple formulation of triaxial concrete behavior,' ACI Journal proceedings, Vol.78, No.1, 1981, pp.62-68 

14. Lotfi, H.R. and Shing, P.B., 'Embedded representation of fracture in concrete with mixed finite elements,' International Journal for Numerical Methods in Engineering, Vol.38, 1995, pp.63-80 

    상세보기

15. Rots, J. and Blaauwendraad, J., 'Crack model for concrete: discrete or smeared? fixed, multi-directional or rotating?,' Heron, 34(1), Delft University of Technology, the Netherlands, 1989 

16. Milford, R.V., 'The application of the rotating crack model to the analysis of reinforced concrete shells,' Computer & Structures, Vol.20, No.3, 1985, pp.225-234. 

    상세보기

17. Taylor, R.L., 'FEAP User Manual ver.7.1,' Univ. of California, Berkeley, Department of Civil and Environmental Engineering, 1999 

18. Hurlbut, B.J., 'Experimental and computational investigation of strain-softening in concrete,' Report AFOSR 82-0273, CEAE Department, University of Colorado at Boulder, 1985 

19. Lee, Y-H and Willam, K.J., 'Mechanical properties of concrete in uniaxial compression,' ACI Material Journal, Vol.94, No.6, 1997, pp.457-471 

20. Xiao, Y., Preiestley, M.J.N., and Seible, F., 'Steel jacket retrofit for enhancing shear strength of short rectangular reinforced concrete columns,' Report No.SSRP-92/07, University of California, San Diego, 1993 

저자의 다른 논문 :

권민호 (56) 장준호 (24)