$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

부분소결공정에 의한 다공질 탄화규소 세라믹스의 제조 및 특성
Fabrication of Porous SiC Ceramics by Partial Sintering and their Properties 원문보기

한국세라믹학회지 = Journal of the Korean Ceramic Society, v.41 no.7 = no.266, 2004년, pp.541 - 547  

김신한 (서울시립대학교 산업기술연구소) ,  김영욱 (서울시립대학교 신소재공학) ,  윤중열 (한국기계연구원 세라믹재료그) ,  김해두 (한국기계연구원 세라믹재료그룹)

초록
AI-Helper 아이콘AI-Helper

일반적으로 혼합분말의 소결에서 작은 입자에 큰 입자의 첨가는 소결성의 저하를 가져온다. 본 연구에서는 이러한 원리를 이용하여 작은 SiC 입자에 큰 SiC 휘스커 또는 큰 SiC 입자를 첨가하여 소결성을 저하시키고, YAG(Y$_3$A1$_{5}$O$_{12}$)상을 소결 첨가제로 사용함으로서 다공질 SiC 세라믹스를 제조하였다. 제조된 다공질 SiC 세라믹스기공율은 큰 입자의 함량과 소결 압력을 제어함으로서 0.3-39% 범위에서 제어할 수 있었다. 기공율은 큰 입자의 함량이 증가함에 따라 증가하였고, SiC 휘스커를 첨가하는 것이 큰 SiC 입자를 첨가하는 것 보다 기공율을 높이는데 효과적이었다. 제조된 다공질 세라믹스에서 기체의 통기성은 기공율이 증가함에 따라 증가하였고, 굽힘강도는 기공율이 증가함에 따라 감소하였다. 기공율이 18% 이상인 다공질 SiC 세라믹스의 경우에 주목할 만한 변형율이 관찰되었다.

Abstract AI-Helper 아이콘AI-Helper

Addition of large particles restrains densification by small particles in mixed particle systems. In the present study, large SiC whiskers or particles were introduced into small particles for restraining densification and the mixtures were sintered using yttrium aluminum garnet (Y$_3$A1<...

주제어

참고문헌 (23)

  1. 윤중열, 김해두, 박천홍. 이중 기공구조를 갖는 다공질체의 제조. 한국세라믹학회지 = Journal of the Korean Ceramic Society, vol.39, no.10, 919-927.

  2. J. Kor. Ceram. Soc. 27 179 1990 

  3. Kim, Shin-Han, Kim, Young-Wook, Park, C. B.. Effect of inert filler addition on pore size and porosity of closed-cell silicon oxycarbide foams. Journal of materials science, vol.39, no.10, 3513-3515.

  4. Colombo, Paolo, Modesti, Michele. Silicon Oxycarbide Ceramic Foams from a Preceramic Polymer. Journal of the American Ceramic Society, vol.82, no.3, 573-578.

  5. Am. Ceram. Soc. Bull. 76 61 1997 

  6. Colombo, Paolo, Hellmann, John R.. Ceramic foams from preceramic polymers. Materials research innovations, vol.6, no.5, 260-272.

  7. Sepulveda, Pilar, Ortega, F. S., Innocentini, Murilo D. M., Pandolfelli, Victor C.. Properties of Highly Porous Hydroxyapatite Obtained by the Gelcasting of Foams. Journal of the American Ceramic Society, vol.83, no.12, 3021-3024.

  8. Colombo, Paolo, Gambaryan‐Roisman, Tatiana, Scheffler, Michael, Buhler, Peter, Greil, Peter. Conductive Ceramic Foams from Preceramic Polymers. Journal of the American Ceramic Society, vol.84, no.10, 2265-2268.

  9. Sepulveda, P, Binner, J.G.P. Processing of cellular ceramics by foaming and in situ polymerisation of organic monomers. Journal of the European Ceramic Society, vol.19, no.12, 2059-2066.

  10. Kim, Young-Wook, Kim, Shin-Han, Xu, Xiang, Choi, Cheong-Ho, Park, Chul B., Kim, Hai-Doo. Fabrication of porous preceramic polymers using carbon dioxide. Journal of materials science letters, vol.21, no.21, 1667-1669.

  11. Kim, Young-Wook, Park, Chul B. Processing of microcellular preceramics using carbon dioxide. Composites science and technology, vol.63, no.16, 2371-2377.

  12. Kim, Young‐Wook, Kim, Shin‐Han, Wang, Chunmin, Park, Chul B.. Fabrication of Microcellular Ceramics Using Gaseous Carbon Dioxide. Journal of the American Ceramic Society, vol.86, no.12, 2231-2233.

  13. 황성식, 박상환, 한재호, 한경섭, 김찬목. 반응소결 탄화규소 다공체의 기계적 특성. 한국세라믹학회지 = Journal of the Korean Ceramic Society, vol.39, no.10, 948-954.

  14. J. Kor. Ceram. Soc. 20 115 1983 

  15. Komac, M.. The investigation of high-temperature strength of SiC based refractories. Ceramics international, vol.7, no.3, 103-105.

  16. Keller, N., Pham‐Huu, C., Roy, S., Ledoux, M. J., Estournes, C., Guille, J.. Influence of the preparation conditions on the synthesis of high surface area SiC for use as a heterogeneous catalyst support. Journal of materials science, vol.34, no.13, 3189-3202.

  17. Wu, M., Fujiu, T., Messing, G.L.. Synthesis of cellular inorganic materials by foaming sol-gels. Journal of non-crystalline solids, vol.121, no.1, 407-412.

  18. Adv. Ceram. Mater. 2 827 1987 10.1111/j.1551-2916.1987.tb00156.x 

  19. Kim, Young-Wook, Lee, June-Gunn. Pressureless sintering of Al2O3-SiC whisker composites. Journal of materials science, vol.26, no.5, 1316-1320.

  20. Kim, Shin-Han, Kim, Young-Wook, Mitomo, Mamoru. Microstructure and fracture toughness of liquid-phase-sintered β-SiC containing β-SiC whiskers as seeds. Journal of materials science, vol.38, no.6, 1117-1121.

  21. Kim, Young-Wook, Lee, Sung-Gu, Lee, Young-Il. Pressureless sintering of SiC-TiC composites with improved fracture toughness. Journal of materials science, vol.35, no.22, 5569-5574.

  22. Am. Ceram. Soc. Bull. 81 20 2002 

  23. Shigegaki, Yasuhiro, Brito, Manuel E., Hirao, Kiyoshi, Toriyama, Motohiro, Kanzaki, Shuzo. Strain Tolerant Porous Silicon Nitride. Journal of the American Ceramic Society, vol.80, no.2, 495-498.

저자의 다른 논문 :

관련 콘텐츠

오픈액세스(OA) 유형

GOLD(Hybrid)

저자가 APC(Article Processing Charge)를 지불한 논문에 한하여 자유로운 이용이 가능한, hybrid 저널에 출판된 논문

이 논문과 함께 이용한 콘텐츠

저작권 관리 안내
섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로