최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. A. A, v.28 no.9 = no.228, 2004년, pp.1391 - 1398
서정원 (한국철도기술연구원) , 구병춘 (한국철도기술연구원) , 최재붕 (성균관대학교 기계공학부) , 김영진 (성균관대학교 기계공학부)
Railway wheels and axles belong to the most critical components in railway vehicles. The service conditions of railway vehicles became more severe in recent years due to the increase of speed. Therefore, a more precise evaluation of wheelset life and safety has been requested. Wheel/rail contact fat...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Cannon, D. F. and Pradier, H., 1996, 'Rail Rolling Contact Fatigue Research by the European Rail Research Insititue,' Wear, 191, pp. 1-13
Bijak-Aochowski, M., 1997, 'Residual Stress in Some Elasto-Plastic Problems of Rolling Contact with Friction,' Int. J. Mech. Sci. Vol. 39, pp. 15-32
Kulkarni, S. M., 1991, 'Elasto-Plastic FE Analysis of Repeated Three Dimensional, Elliptical Rolling Contact with Rail Wheel Properties,' Transactions of the ASME, Vol. 113, pp. 434-441
Gordon, J. and Perlman, A., 1998, 'Estimation of Residual Stresses in Railroad Commuter Car Wheels Following Manufacture,' ASME IMECE RTD
Kim, K. J. and Choi, K. J., 1993, 'A Study on Countermeasure of Damage of Railway Wheel,' Railway Technology Report, Vol. 27, pp. 201-233
Seo, J. W., Suk, C. S. and Kim, Y. J., 2002, 'Change of Residual Stress of Railway Wheel by Brake Condition,' Proceedings of the KSME Material and Fracture part, pp. 176-182
Donzella, G. and Scepi, M., 1998, 'The Effect of Block Braking on the Resdual Stress State of a Solid Railway Wheel,' IMechE, pp. 145-158
Lundin, R., 1991, 'Contact Region Fatigue of Railway Wheels Under Combined Mechanical Rolling Pressure and Thermal Brake Loading,' wear 144, pp. 57-70
Ekberg, A. and Bjarnehed, H., 1995, 'A Fatigue Life Model for Gerneral Rolling Contact with Application to Wheel/Rail Damage,' Fatigue Fract. Eneng Mater. Struct. Vol. 18, pp. 1189-1199
Sraml, M. and Flasker, J., 2003, 'Numerical Procedure for Predicting the Rolling Contact Fatigue Crack Initiation,' Int. Journal of Fatigue 25, pp. 585-595
Noda, T., 2002, 'Safety of Wheels and Axles for Railway Vehicles and Engineering Ethics,' Forum Vol. 7 No. 7, pp. 9-16
Joo, J. W. and Park, C. K., 1998, 'Determination of Non-Uniform Residual Stress by the Hole Drilling Method,' Transactons of the KSME A Vol. 22, No. 2, pp. 268-277
Kim, C, Suk, C. S. and Yang, W. H., 2000, 'Influence of the Hole Eccentricity in Residual Stresses Measurement by the Hole-drilling Method,' Transactons of the KSME A, Vol. 24, No. 8, pp. 2059-2064
Idemura, K., 1997, 'Brake Technology of Railway Vehicle,' Research of Machine, Vol. 49, pp. 49-68
Johnson, K.L., 1985, 'Contact Mechanics,' Cambridge University Press, pp. 99-104
Ringsberg, J.W., 2000, 'Prediction of Fatigue Crack Initiation for Rolling Contact Fatigue,' Int. Journal of Fatigue 22, pp. 205-215
Moyar, G., 1991, 'An Analysis of the Thermal Contributions to Railway Wheel Shelling,' Wear, 144, pp. 117-138
Mutton, P., 1991, 'Rolling Contact Fatigue in Railway Wheels Under High Axle Loads,' Wear, 144, pp. 193-152
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.