최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.21 no.12 = no.165, 2004년, pp.67 - 74
이태원 (금오공과대학교 기계공학부) , 정재한 (삼익 LMS 기술연구소)
Linear motor has been considered to be the most suitable electric machine for high speed and high precision linear motion control. Thrust of linear motor is one of the important factor to specify motor performance. Maximum thrust can be obtained by increasing the current in conductor and is relative...
Mizuno, T. and Yamada, H., 'Magnet Circuit Analysis of a Linear Synchronous Motor with Permanent Magnets,' IEEE Trans. on Magn., Vol. 14, No .4, pp. 3027-3029, 1999
Yamada, H., 'Optimum Design of Thin Linear DC Motor with Long Strokes,' T.IEE Japan, Vol. 116-D, No .4, pp. 384-389, 1996
Hong, J. P., Nam, H. and Kim, K. C., 'LDM Design for Reduction of Mover Mass Using RSM,' Proceedings of the KIEE summer annual conference, pp. 964-966, 2002
Choi, M. S., Kim, Y. Y. and Lee, S. L., 'The Optimum Geometric Design Stators for a Brushless DC Linear Motor,' Transactions of KSME, A, Vol. 23, No. 3, pp. 442-448, 1999
Eun, I. U., 'Improvement of the Thermal Characteristics of Synchronous Linear Motors Through Insulation,' J. of KSPE, Vol. 19, No. 3, pp. 123-130, 2002
Jung, J. H., Shin, S. H. and Lee,. S. R., 'Optimization of the Design Variables of Linear Motor by FEM,' Trans. of KSME, A, Vol. 26, No. 7, pp. 1232-1240, 2002
※ AI-Helper는 부적절한 답변을 할 수 있습니다.