최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국마린엔지니어링학회지 = Journal of the Korean Society of Marine Engineering, v.29 no.3, 2005년, pp.290 - 296
Shin Shang-Hyon (Division of Marine Engineering System, Mokpo Maritime University)
The contour method is based on the elastic superposition principle, and relies on deformations that occur when a residually stressed part is cut along a plane. During the cut, the part is constrained at a location along the cut so that deformations are restrained as much as possible. The displacemen...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Ruschau, J. J.. John. R., Thompson. S. R. and Nicholas, T., Fatigue Crack Growth Rate Characteristics of Laser Shock Peened Ti-6AI-4V. ASME J. Engineering Materials and Technology, vol. 121, pp. 321-329. 1999
Smith, P.R. Shepard, M. J., Prevey III, P. S. and Clauer, A. H., Effect of Power Density and Pulse Repetition on Laser Shock Peening of Ti-6AI-4V, ASME J. Materials Engineering and Performance, vol. 9, pp. 33-37, 2000
Rankin, J. E. and Hill, M. R., Measurement of Thickness-Average Residual Stress Near the Edge of a Thin Laser Peened Strip , ASME J. Engineering Materials and Technology, vol.125 pp. 283-293, 2003
Prime, M. B., Cross-Sectional Mapping of Residual Stresses by Measuring the Surface Contour After a Cut , ASME J. Engineering Materials and Technology. vol. 123. pp. 162-168. 2001
Buecker, H. F., The propagation of Cracks and the Energy of Elastic Deformation, Trans. ASME, vol. 80, pp. 1225-1230, 1958
ABAQUS, Users Manual, Version 6.2, Hibbitt Karlsson & Sorensen, 2000
Measurement of Residual Stresses by the Hole-drilling Strain Gage Method. Technical Note No. TN-503-4. Vishay-Measurement Group Inc.. 1-19. 1993
Beaney, E. M., Accurate Measurement of Residual Stress on any Steel Using the Center Hole Method, Strain, Journal BSSM, vol. 12, pp. 99-106, 1976
Beghini, M., Bertini. L., and Raffaelli, P., Numerical Analysis of Plasticity Effects in the Hole-drilling Residual Stress Measurement. J. of Testing and Evaluation. vol. 22. pp. 522-529, 1994
Nobre, J. P.. Kornmeier. M., Dias, A. M. and Scholtes. B., Use of the Hole-drilling Method for Measuring Residual Stresses in Highly Stressed Shot-peened Surfaces, Experimental Mechanics, vol. 40, pp. 289-297. 2000
※ AI-Helper는 부적절한 답변을 할 수 있습니다.