$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

극저비속도 원심펌프의 성능과 내부유동특성에 관한 연구
A Study on the Performance and Internal Flow Characteristics of a Very Low Specific Speed Centrifugal Pump 원문보기

大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. B. B, v.29 no.7 = no.238, 2005년, pp.784 - 794  

쿠로카와준이치 (요코하마국립대학 대학원 공학연구원) ,  이영호 (한국해양대학교 기계) ,  최영도 (요코하마국립대학 대학원 공학연구원)

Abstract AI-Helper 아이콘AI-Helper

In the very low specific speed range ($n_s=0.24$ < 0.25, non-dimensional), the efficiency of centrifugal pump designed by a conventional method is very low in common. Therefore, positive-displacement pumps have long been used widely. Recently, since the centrifugal pumps are becoming high...

주제어

참고문헌 (13)

  1. Stepanoff, A. J., 1957, 'Centrifugal and Axial Flow Pumps,' 2nd Ed., John Wiley & Sons, New York, pp. 69-89 

  2. Rodgers, C., 1990, 'Experiments with a Low-Specific-Speed Partial Emission Centrifugal Compressor,' ASME J. Turbomach., Vol. 112, pp. 30-37 

  3. Abramian, M. and Howard, J. H. G., 1994, 'Experimental Investigation of the Steady and Unsteady Relative Flow in a Model Centrifugal Impeller Passage,' ASME, J. Turbomach., Vol. 116, pp. 269-279 

  4. Worster, R.C., 1963, 'The Flow in Volutes and Its Effects on Centrifugal Pump Performance,' Proc. Ins. Mech. Eng., Vol. 177, No. 31, pp. 843-871 

  5. Kurokawa, J., Matsumoto, K., Matsui, J. and Kitahora, T., 1998, 'Performances of Centrifugal Pumps of Very Low Specific Speed,' Proc. 19th IAHR Symposium on Hydraulic Machinery and Cavitation, Singapore, Vol. 2, pp. 833-842 

  6. Kurokawa, J., Matsumoto, K., Matsui, J. and Imamura, H., 2000, 'Performance Improvement and Peculiar Behavior of Disk Friction and Leakage in Very Low Specific-Speed Pumps,' Proc. 20th IAHR Symposium on Hydraulic Machinery and Systems, Charlotte, USA, CD-ROM Paper No. 3B(PD-02) 

  7. Ohta, H. and Aoki, K., 1990, 'Study on Centrifugal Pump for High-Viscosity Liquids (Effect of Impeller Blade Number on the Pump Performance),' Trans. JSME, B, Vol. 56, No. 644, pp. 1702-1707 

  8. Minemura, K., Kinoshita, K., Ihara, M. and Egashira, K., 1995, 'Effects of Design Parameters on Air-Water Two-Phase Flow Performance of a Radial-Flow Pump,' Trans. JSME, B, Vol. 61, No. 588, pp. 996-3004 

  9. Choi, Y. -D., Kurokawa, J., Matsui, J. and Imamura, H., 2002, 'An Experimental Study on the Internal Flow Characteristics of a Very Low Specific-Speed Centrifugal Pump,' Proc. 5th JSME-KSME Fluids Engineering Conference, Nagoya, Japan, CD-ROM Paper No. OS16-3-6 

  10. Wiesner, F. J., 1967, 'A Review of Slip Factors for Centrifugal Impellers,' Trans. ASME, Ser, A, Vol. 89, pp. 558-572 

  11. Murakami, M., Kikuyama, K. and Asakura, E., 1980, 'Velocity and Pressure Distributions in the Impeller Passages of Centrifugal Pumps,' ASME J. Fluids Eng., Vol. 102, pp. 420-426 

  12. Choi, Y. -D., Kurokawa, J., Matsui, J. and Imamura, H., 2002, 'Internal Flow Characteristics of a Centrifugal Pump with Very Low Specific Speed,' Proc. 21st IAHR Symposium on Hydraulic Machinery and Systems, Lausanne, Switzerland, Vol. 1, pp. 317-323 

  13. Miyamoto, H., Ohba, H., 1995, 'The Effect of Flow Rate on Characteristics in Centrifugal Impellers,' JSME Int. J., Ser. B, Vol. 38, No. 1, pp. 25-30 

저자의 다른 논문 :

관련 콘텐츠

섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로