탄자리아산 강옥의 보석광물학적 특성을 파악하기 위하여 XRD, XRF, EPMA, FT-IR과 SEM-CL 분석을 수행하였다. 탄자니아산 강옥은 장파장 자외선이나 단파장 자외선에서 거의 형광반응이 나타나지 않는다. 탄자니아산 강옥은 내포물의 종류에 따라 5가지 유형으로 분류될 수 있으며, 유형 I은 액상 내포물 풍부한 형태, 유형 II는 기상 내포물 풍부한 형태, 유형 III은 액상 $CO_{2}$를 함유한 형태, 유형 IV는 고상 내포물을 함유한 형태, 유형 V는 유체 포유물과 고상 내포물 및 딸광물(daughter mineral)이 공생하는 복합 내포물 형태이다. 탄자니아산 강옥의 SEM-CL분석에서 성장구조가 수반된 쌍정조직, 스피넬 반정, 괴상조직과 누대조직 등이 관찰된다. 루비와 사파이어는 크롬과 철의 함량에 의해 뚜렷이 구분되며, $Al_{2}O_{3}/100-Cr_{2}O_{3}-Fe_{2}O_{3}$ 다이어그램에서 각각 고유한 영역에 도시된다. FT-IR 분석결과, 탄자니아산 강옥 시료들이 모두 유사한 양상을 보이고 있으며, $455.09\~459.23\;cm^{-1},\;603.15\~611.71\;cm^{-1},\;1509.00\~1655.05\;cm^{-1}$와 $3436.41\~3468.87\;cm^{-1}$에서 흡수 피크가 관찰된다. 연구 결과는 탄자니아산 강옥의 감별 및 산지 추측에 유용한 정보로 활용될 수 있다.
탄자리아산 강옥의 보석광물학적 특성을 파악하기 위하여 XRD, XRF, EPMA, FT-IR과 SEM-CL 분석을 수행하였다. 탄자니아산 강옥은 장파장 자외선이나 단파장 자외선에서 거의 형광반응이 나타나지 않는다. 탄자니아산 강옥은 내포물의 종류에 따라 5가지 유형으로 분류될 수 있으며, 유형 I은 액상 내포물 풍부한 형태, 유형 II는 기상 내포물 풍부한 형태, 유형 III은 액상 $CO_{2}$를 함유한 형태, 유형 IV는 고상 내포물을 함유한 형태, 유형 V는 유체 포유물과 고상 내포물 및 딸광물(daughter mineral)이 공생하는 복합 내포물 형태이다. 탄자니아산 강옥의 SEM-CL분석에서 성장구조가 수반된 쌍정조직, 스피넬 반정, 괴상조직과 누대조직 등이 관찰된다. 루비와 사파이어는 크롬과 철의 함량에 의해 뚜렷이 구분되며, $Al_{2}O_{3}/100-Cr_{2}O_{3}-Fe_{2}O_{3}$ 다이어그램에서 각각 고유한 영역에 도시된다. FT-IR 분석결과, 탄자니아산 강옥 시료들이 모두 유사한 양상을 보이고 있으며, $455.09\~459.23\;cm^{-1},\;603.15\~611.71\;cm^{-1},\;1509.00\~1655.05\;cm^{-1}$와 $3436.41\~3468.87\;cm^{-1}$에서 흡수 피크가 관찰된다. 연구 결과는 탄자니아산 강옥의 감별 및 산지 추측에 유용한 정보로 활용될 수 있다.
XRD, XRF, EPMA, FT-IR, and SEM-CL studies were carried out in order to characterize gemological features of corundum from Tanzania. Fluorescence reaction of the Tanzanian corundum to short and long wave ultraviolet rays was weakly detected. Inclusions in Tanzanian corundum are divided into five type...
XRD, XRF, EPMA, FT-IR, and SEM-CL studies were carried out in order to characterize gemological features of corundum from Tanzania. Fluorescence reaction of the Tanzanian corundum to short and long wave ultraviolet rays was weakly detected. Inclusions in Tanzanian corundum are divided into five types, Type I is fluid-rich inclusion, Type II is gas-rich inclusion, Type III is liquid $CO_{2}$ inclusion, Type IV is solid-rich inclusion, and Type V is a mixture of fluid and solid inclusion and daughter minerals. SEM-CL images show twin structure with growth texture, microphenocryst of spinel solid inclusions, massive and growth texture. Ruby and sapphire from Tanzania are distinctly distinguished by concentrations of Fe and Cr, and plotted in the particular field at $Al_{2}O_{3}/100-Cr_{2}O_{3}-Fe_{2}O_{3}$ diagram. According to FT-IR analysis, all corundum specimens from Tanzania showed the similar patterns, and absorption peaks of $455.09\~459.23\;cm^{-1},\;603.15\~611.71\;cm^{-1},\;1509.00\~1655.05\;cm^{-1}\;and\;3436.41\~3468.87\;cm^{-1}$. These distinctive characteristics mentioned above can be used to identify the locality and source of corundum stones from Tanzania.
XRD, XRF, EPMA, FT-IR, and SEM-CL studies were carried out in order to characterize gemological features of corundum from Tanzania. Fluorescence reaction of the Tanzanian corundum to short and long wave ultraviolet rays was weakly detected. Inclusions in Tanzanian corundum are divided into five types, Type I is fluid-rich inclusion, Type II is gas-rich inclusion, Type III is liquid $CO_{2}$ inclusion, Type IV is solid-rich inclusion, and Type V is a mixture of fluid and solid inclusion and daughter minerals. SEM-CL images show twin structure with growth texture, microphenocryst of spinel solid inclusions, massive and growth texture. Ruby and sapphire from Tanzania are distinctly distinguished by concentrations of Fe and Cr, and plotted in the particular field at $Al_{2}O_{3}/100-Cr_{2}O_{3}-Fe_{2}O_{3}$ diagram. According to FT-IR analysis, all corundum specimens from Tanzania showed the similar patterns, and absorption peaks of $455.09\~459.23\;cm^{-1},\;603.15\~611.71\;cm^{-1},\;1509.00\~1655.05\;cm^{-1}\;and\;3436.41\~3468.87\;cm^{-1}$. These distinctive characteristics mentioned above can be used to identify the locality and source of corundum stones from Tanzania.
Osipowicz, T., Tay, T.S., Orlic, J., Tang, S.M. and Watt, F. (1995) Nuclear microscopy of rubies: trace elements and inclusions. Nuclear Instruments and Methods in Physics Research, 104, 590-594
Owen, M.R. and Carozzi, A.V. (1986) Southern provenance of upper Jackfork Sandstone, southern Ouachita Mountains: Cathodoluminescence petrology. Geological Society of American Bulletin, 97, 110-115
Rusk, B. and Reed, M. (2002) Scanning electron microscope-cathodoluminescence analysis of quartz reveals complex growth histories in veins from the Butte porphyry copper deposit, Montana. Geology, 30, 727-730
Seyedolali, A., Krinsley, D.H., Boggs Jr., S. and Goles, G.G. (1997) Provenance interpretation of quartz by scanning electron microscope - cathodoluminescence fabric analysis. Geology, 25, 787-790
Shoval, S., Boudeulle, M., Yariv, S., Lapides, J. and Panczer, G. (2001) Micro-Raman and FT-IR spectroscopy study of the thermal transformations of St. Claire dickite. Optical Materials, 16, 319-327
※ AI-Helper는 부적절한 답변을 할 수 있습니다.