최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국공작기계학회논문집 = Transactions of the Korean society of machine tool engineers, v.15 no.2, 2006년, pp.81 - 86
이갑조 (조선대학교 대학원 기계공학과) , 김종관 (조선대학교 기계공학과)
The machining parts must be produced within the specification of drawing and those will be able to meet function and efficiency. At that time, it is very important not only precision machine and machining technique but also the measurement technique. So, the improvement of measurement technique is t...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Ansi, S., Taguchi, Y., Horio, K., Kasai, T. and Kobayashi, A., 1990, 'Measuring the Very Small Cutting- Edge Radius for a Diamond Tool Using a New Kind of SEM Having Two Detectors', Annals of the CIPR, Vol. 39, part1, pp. 85-88
IKawa, N., 1991, 'Ultra-precision Metal Cutting- The Past, the Present and the Future', Annals of the CIRP, Vol. 40, No. 2, pp. 587-594
Moronuk, N. and Furukawa, Y., 1988, 'A Study on the Precision Machine with Friction Gearing', JSPE, Vol. 54, No. 11, pp. 2113-2130
Kakino, Y., Ihara, Y., Nakatsu, Y. and Shinohara, A., 1989, 'A Study on the Motion Accuracy of the NC Machine Tool', JSPE, Vol. 55, No. 3, pp. 587-600
Kang, S. J. and Kim, J. K., 2004, 'Characteristics Evaluation of Surface Roughness with Ultra-precision Machining', Trans. of KSMTE, Vol. 13, No. 1, pp. 9-15
Kang, S. J., Oh, S. R., Lee G. J. and Kim, J. K., 2004, 'A Study on the Surface Machining Characteristics of Ultra-precision through SEM Measurement', Proceedings of the KSMTE Spring Conference 2004, pp. 34-41
Jung, J. H., Lee, G. J. and Kim, J. K., 2003, 'An Evaluation of Surface Finish with SEM in Precision Machining, Proceedings of the KSMPE Autumn Conference 2003, pp. 47-52
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.