최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국공작기계학회논문집 = Transactions of the Korean society of machine tool engineers, v.16 no.6, 2007년, pp.21 - 28
이승준 (한국산업기술대학교 지식기반기술 에너지대학원 나노광공학과) , 현동훈 (한국산업기술대학교 나노광공학과)
Injection molding process factors such as molding temperature, injection pressure, flow rate and flow velocity, must be controlled properly in filling and packing phases in the injection molding process. In this study, effects of these factors on the injection molding were investigated through the f...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Ha, Y. W., Jung, T. H. and Lee, B. J., 2002, 'Injection Moulding of Polyetherimide Axi-Symmetric Elements,' Transactions of the Korean Society of Machine Tool Engineers, Vol. 11, No. 6, pp. 68-74
Kang, S. D., Kim, W. S., Jang, K. H. and Kim, D. H., 2004, 'A Study on the Compensation of Ultra-precision Aspheric Lens Mold,' Proceeding of KSPE spring conference, pp. 237-238
Kim, J. S. and Yoon, K. H., 2003, 'A Study on the Prediction of Thermally-Induced Residual Stress and Birefringence in Quenched Polystyrene Plate Including Free Volume Theory,' KSME (A), Vol. 27, No. 1, pp. 77-87
Yoon, K. H., 1996, 'On The Manufacturing Process of a Optical Disk Substrate,' Polymer Science and Technology, Vol. 7, No. 3, pp. 284-290
Otani, Y., Shimada, T., Yoshizawa, T. and Umeda, N., 1994, 'Two-dimensional birefringence measurement using the phase shifting technique,' Opt. Engng., Vol. 33, pp. 1604-1609
Shyu, G. D., 1993, Birefringence and Residual Stresses in Molded Articles of Amorphous Polymers, Ph. D. Thesis, The University of Akron
Kim, H. P. and Kim, Y. J., 2002, 'A Study on the Effects of Filling and Packing Phases on the Injection Molding,' Proceeding of the KSMTE spring conference, pp. 112-118
Lee, H. S., Lee, H. K. and Yang, G. E., 2005, 'A Study on Injection Molding Analysis and Validation of Large Injection-Molded Body Using Design of Experiment', Proceeding of the KSMTE spring conference, pp. 109-114
Lee, S. B., 2005, Design of Experiment by Minitab, ELECTRIC INC
※ AI-Helper는 부적절한 답변을 할 수 있습니다.