최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국주조공학회지 = Journal of Korea Foundry Society, v.27 no.1, 2007년, pp.36 - 41
부성덕 ((주)잘만테크) , 강복현 (한국기술교육대학교 신소재공학과) , 김기영 (한국기술교육대학교 신소재공학과)
Compressive properties of the open cell 6063 aluminum alloy foams made by the plaster molding process were investigated before and after heat treatment. Loading process was controlled at a displacement rate of 2 mm/min. Compressive strength of 10 PPI foam was the largest of the same density foams. I...
Ashby et al.: Metal Foams, Butterworth & Heinemann (2000)
A. H. Brothers and D.C. Dunand: Scripta Materalia, 'Amorphous metal foams',54 (2006) 513-520
E. W. Andrews et al: Mechanical Sciences, 'Size effects in ductile cellular solids. Part II: experimental results', 43 (2001) 701-713
L. J. Gibson: Annu. Rev. Mater. Sci., 'Mechanical Behavior of Metallic Foams', 30 (2000) 191-227
C. San Marchi et al.: Acta materialia, 'Uniaxial deformation of open-cell aluminum foam: the role of internal damage', 52 (2004) 2895-2902
J. Zhou et al.: Mechanics of materials, 'Mechanisms and mechanics of compressive deformation in open-cell Al foams', 36 (2004) 781-797
※ AI-Helper는 부적절한 답변을 할 수 있습니다.