최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. A. A, v.31 no.3 = no.258, 2007년, pp.322 - 330
이국희 (고려대학교 대학원 기계공학과) , 오창식 (고려대학교 대학원 기계공학과) , 유봉 (고려대학교 기계공학과) , 박치용 (한국전력연구원) , 김윤재 (고려대학교 기계공학과)
This paper quantifies the effect of a bend angle of a pipe bend on plastic loads, via small strain and large strain FE limit analyses using elastic-perfectly plastic materials. To consider the effect of the attached straight pipe, two limiting cases are considered. One case corresponds to the pipe b...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Kim, Y. J. and Oh, C. S., 'Effect of Attached Straight Pipes on Finite Element Limit Analysis of Pipe Bends,' International Journal of Pressure Vessels and Piping (accepted, available online November 2006)
Spence, J. and Findlay, G. E., 1973, 'Limit Load for Pipe Bends Under In-plane Bending,' Proc. 2nd Int. Conf. On Pressure Vessel Technology, San Antonio, 1-28, pp. 393-399
Calladine, C.R., 1974, 'Limit Analysis of Curved Tubes,' Journal of Mechanical Engineering Science, Vol. 16, pp. 85-87
Goodall, I. W., 1978, 'Lower Bound Limit Analysis of Curved Tubes Loaded by Combined Internal Pressure and In-plane Bending Moment,' CEGB report RD/B/N4360, Central Electricity Generating Board
Kim, Y. J. and Oh, C. S., 2006, 'Limit Loads for Pipe Bends Under Combined Pressure and In-plane Bending Based on Finite Element Limit Analysis,' International Journal of Pressure Vessels and Piping, Vol. 83, pp. 85-90
Touboul, F., Ben Djedidia, M. and Acker D., 1988, 'Design Criteria for Piping Components Against Plastic Collapse, Application to Pipe Bend Experiments,' Pressure Vessel Technology, Proceedings of the 6th International Conference, Beijing
Chattopadhyay, J., Natahani, D. K., Dutta, B. K. and Kushwaha, H. S., 2000, 'Closed-form Collapse Moment Equations of Elbows Under Internal Pressure and In-plane Bending Moment,' ASME Journal of Pressure Vessel Technology, Vol. 122, pp. 431-436
Kim, Y. J. and Oh, C. S., 2006, 'Closed-form Plastic Collapse Loads of Pipe Bends Under Combined Pressure and In-plane Bending,' Engineering Fracture
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.