최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국전산구조공학회논문집 = Journal of the computational structural engineering institute of Korea, v.22 no.6, 2009년, pp.549 - 555
민성환 (고려대학교 대학원 기계공학과) , 김윤재 (고려대학교 기계공학과) , 전준영 (고려대학교 대학원 기계공학과) , 이국희 (고려대학교 대학원 기계공학과)
Based on three-dimensional(3-D) finite element limit analyses, this paper provides limit and TES (Twice-Plastic Load) loads for mitred pipe bends under bending and pressure. The plastic limit loads are determined from FE limit analyses based on elastic-perfectly-plastic materials using the small and...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
미터밴드가 많이 사용되는 시설은 무엇인가? | 미터밴드(mitred bend)는 산업 전반에서 널리 쓰인다. 일반적으로 설계자들은 불연속성이 없는 곡관을 더 선호하지만, 화학 시설이나 담수화 플랜트에서와 같이 복잡한 플랜트 시설 에서는 미터밴드가 공간 활용도가 뛰어나므로 많이 사용된다 (Wood, 2008). 현재까지 곡관에 대한 연구는 다양하게 수행 되었지만(Calladine, 1974; Chattopadhyay 등, 2000; Goodall, 1978; Kim 등, 2006; 2007; Mourad 등, 2000;2001; Spence 등, 1973; Tan 등, 2002; Touboul 등, 1988) 미터밴드의 연구는 매우 부족하고 일부 연구가 활용가 능하다(Babaii 2003; Kitching 등, 1988; Robinson 등, 2002). | |
불안정 하중은 변위-하중 선도에서 무엇을 의미하는가? | 불안정 하중(instability load)은 변위-하중 선도에서 최대 하중을 의미한다. 그림 3의 세 번째 열림방향 굽힘하중 (In-plane bending opening)에서 TES 소성하중이 불안정 하중 보다 큰 굽힘 각도에서 존재한다. | |
ABAQUS v6.7을 이용하여 유한요소해석을 수행할 경우, 굽힘하중이 가해질때, 기하학적 선형 유한요소 해석보다 기하학적 비선형 유한요소해석이 현실적인 이유는? | 굽힘하중이 가해질 때, 이러한 설정에 따라서 소성하중의 차이가 현저히 나타난다. 굽힘하중이 가해지는 경우, 변형 중에 미터밴드의 단면의 형상이 크게 변한다. 기하학적 선형 유한요소해석에 서는 단면 형상 변화를 고려하지 않고, 초기 단면 형상을 기초로 해석을 수행한다. 따라서 굽힘하중을 받는 미터밴드의 거동을 정확하게 표현하기 어렵고, 단면의 형상 변화를 고려 하기 위한 기하학적 비선형 유한요소해석이 현실적이다. 본연구에서는 기하학적 선형 유한요소해석과 기하학적 비선형 유한요소해석을 모두 수행하였다. |
ASME Boiler and Pressure Vessel Code (1998) Section III
Babaii Kochekseraii, S., Robinson, M. (2003) Parametric Survey of Upper and Lower Bound Linit Internal Pressure for Single Mitred Pipe Bends of Various Geometries, International Journal of Pressure Vessels and Piping, 82, pp.480-488
Calladine, C.R. (1974) Limit Analysis of Curved Tubes, Journal of Mechanical Engineering Science, 16, pp.85-87
Chattopadhyay, J., Natahani, D.K., Dutta, B.K., Kushwaha, H.S. (2000) Closed-Form Collapse Moment Equations of Elbows Under Internal Pressure and In-Plane Bending Moment, ASME Journal of Pressure Vessel Technology, 122, pp.431-436
Goodall, I.W. (1978) Lower Bound Limit Analysis of Curved Tubes Loaded by Combined Internal Pressure and In-Plane Bending Moment, CEGB report RD/B/N4360, Central Electricity Generating Board
Kim, Y.J., Lee, K.H., Oh, C.S., Yoo, B., Park, C.Y. (2007), Effect of Bend Angle on Plastic Loads of Pipe Bends Under Internal Pressure and In-Plane Bending, International Journal of Mechanical Sciences, In Press, (Accepted Manuscript, Available online 23 March 2007)
Kim, Y.J., Oh, C.S. (2006) Closed-Form Plastic Collapse Loads of Pipe Bends Under Combined Pressure and In-Plane Bending, Engineering Fracture Mechanics, 73, pp.1437-1454
Kim, Y.J., Oh, C.S. (2006) Limit Loads for Pipe Bends Under Combined Pressure and In-Plane Bending Based on Finite Element Limit Analysis, International Journal of Pressure Vessels and Piping, 83, pp.85-90
Kim, Y.J., Oh, C.S. (2007) Effect of Attached Straight Pipes on Finite Element Limit Analysis of Pipe Bends, International Journal of Pressure Vessels and Piping, 84, pp.177-184
Kitching, R., Rahimi, G.H., So, H.S. (1988), Plastic Collapse of Single Mitred Pipe Bends, International Journal of Pressure Vessels and Piping, 38, pp.129-145
Mourad, H.M., Younan, M.Y.A. (2000), Limit Load Analysis of Pipe Bends Under out-of-plane Moment Loading and Internal Pressure, Trans. ASME, Journal of Pressure Vessel Technology, 124, pp.32-37
Mourad, H.M., Younan, M.Y.A. (2000), The Effect of Modeling Parameters on the Predicted Limit Loads for Pipe Bends Subjected to out-of-plane Moment Loading and Internal Pressure, Trans. ASME, Journal of Pressure Vessel Technology, 122, pp.450-456
Mourad, H.M., Younan, M.Y.A. (2001), Nonlinear Analysis of Pipe Bends Subjected to out-of-plane Moment Loading and Internal Pressure, Trans. ASME, Journal of Pressure Vessel Technology, 123, pp.253-258
Robinson, M., Babaii Kochekseraii, S. (2002) Parametric Survey of Upper and Lower Bound Linit in-plane Bending Moment for Single Mitred Pipe Bends of Various Geometries, International Journal of Pressure Vessels and Piping, 79, pp.735-740
Spence, J., Findlay, G.E. (1973) Limit Load for Pipe Bends Under In-Plane Bending, Proc. 2nd Int. Conf. On Pressure Vessel Technology, San Antonio, 1-28, pp.393-399
Tan, Y., Wilkins, K., Matzen, V. (2002), Correlation of Test and FEA Results for Elbows Subjected to out-of-plane Loading, Nuclear Engineering and Design, 217, pp.213-224
Touboul, F., Ben Djedidia, M., Acker D. (1988) Design Criteria for Piping Components Against Plastic Collapse, Application to Pipe Bend Experiments, Pressure Vessel Technology, Proceedings of the 6th International Conference, Beijing
Wood, J. (2008) A Review of Literature for the Structural Assessment of Mitred Bends, International Journal of Pressure Vessels and Piping, 85(5), pp.275-294
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.