최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. A. A, v.31 no.5 = no.260, 2007년, pp.562 - 569
송태광 (고려대학교 대학원 기계공학과) , 김종성 (한전기술(주)) , 진태은 (한전기술(주)) , 김윤재 (고려대학교 기계공학과)
This paper presents plastic limit loads and approximate J estimates for axial through-wall cracked pipe bends under internal pressure and in-plane bending. Geometric variables associated with a crack and pipe bend are systematically varied, and three possible crack locations (intrados, extrados and ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Ainsworth, R.A., 1984, 'The Assessment of Defects in Structures of Strain Hardening Materials,' Engineering Fracture Mechanics ,Vol. 19, pp. 633-642
2001, 'Assessment of the Integrity of Structures Containing Defects,' R6 Revision 4, British Energy
Webster, G.A. and Ainsworth, R.A., 1994, 'High Temperature Component Life Assessment,' Chapman & Hall, London, UK
Kim, Y-J. and Oh, C-S., 2006, 'Limit Loads for Pipe Bends Under Combined Pressure and In-Plane Bending Based on Finite Element Limit Analysis,' International Journal of Pressure Vessels and Piping, 83, 85-90
Kim, Y-J., Huh, N.-S. and Kim, Y.-J., 2001., 'Enhanced Reference Stress Based J and COD Estimation Method for LBB Analysis and Comparison with GE/EPRI Method,' Fatigue and Fracture of Engineering Materials and Structures, Vol. 24, pp. 243-254
Kim, Y-J., Kim, Y-I. and Song, T-K., 2006, 'Finite Element Plastic Loads for Circumferential Cracked Pipe Bends Under In-Plane Bending,' Engineering Fracture Mechanics, Vol. 74, pp. 643-668
Miller, A.G, 1988, 'Review of Limit Loads of Structures Containing Defects,' International Journal of Pressure Vessels and Piping, Vol. 32, pp, 191-327
Folias, E. S., 1975, 'On the Fracture of Nuclear Reactor Tubes,' SMiRT III, London, Paper C4/5
Erdogan, F., 1976, 'Ductile Failure Theories for Pressurised Pipes and Containers,' International Journal of Pressure Vessels and Piping, Vol. 4, pp. 253-283
Miller, AG. and Ainsworth, RA., 1989, 'Consistency of Numerical Results for Power-Law Hardening Materials and the Accuracy of the Reference Stress Approximation,' Journal of Engineering Fracture Mechanics, Vol. 32, pp. 237-247
ABAQUS, 2003, 'ABAQUS Standard/User's Manual, Version 6.4,' Hibbit Karlsson & Sorensen, Inc., Pawtucket, RI, USA
Chattopadhyay, J., 2006, 'Improved J and COD Estimation by GE/EPRI Method in Elastic to Fully Plastic Transition Zone,' Engineering Fracture Mechanics, Vol. 73, pp. 1947-2090
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.