최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. A. A, v.31 no.5 = no.260, 2007년, pp.586 - 593
안중혁 (고려대학교 기계공학과) , 김종현 (고려대학교 기계공학과) , 홍석표 (고려대학교 기계공학과) , 박치용 (한전 전력연구원 원자력 연구실) , 김윤재 (고려대학교 기계공학과)
This paper proposes closed-form plastic limit load solutions for elbow with local wall thinning at extrados under internal pressure. This work was performed using 3-dimensional, small strain FE analyses based on elastic-perfectly plastic materials. The wide range of elbow and local wall thinning geo...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Kanninen, M.F., Zahoor, A., Wilkoski, G., Abousayed, I., Marschall, C., Broek, D., Sampath, S., Rhee, H. and Ahmad, J., 1982, 'Instability Predictions for Circumferentially Cracked Type-304 Stainless Pipes Under Dynamic Loading,' EPRI NP-2347, Electric Power Research Institute, Palo Alto, CA
ASME Boiler and Pressure Vessel Code Section IX (1992)
API, API RP579 - Recommended Practice for Fitness-For-Service, 2000, American Petroleum Institute
Choi, J.B., Goo, B.K., Kim, J.C., Kim, Y.J. and Kim, W.S., 2003, 'Development of Limit Load Solutions for Corroded Gas Pipelines,' International Journal of Pressure Vessels and Piping, Vol. 80, pp. 121-128
Stephens, D.R. and Lei, B.N., 2000, 'Development of an Alternative Criterion for Residual Strength of Corrosion Defects in Moderate-to High-Toughness Pipe,' Proc. Int. Pipeline Conf., Vol. 2, pp. 781-792
Miyazaki, K., Kanno, S., Ishiwata, M., Hasegawa, K., Ahn, S.H. and Ando, K., 2002, 'Fracture and General Yield for Carbon Steel Pipes with Local Wall Thinning,' Nuclear Engineering and Design, Vol. 211, pp. 61-68
Hasegawa, K., Sakata, K., Miyazaki, K. and Kanno S., 2002, 'Fatigue Strength for Pipes with Allowable Flaws and Design Curve,' International Journal of Pressure Vessels and Piping, Vol. 79, pp. 37-44
Ahn, S.H., Nam, K.W., Yoo, Y.S., Ando, K., Ji, S.H., Ishiwata, M. and Hasegawa, K., 2002, 'Fracture Behavior of Straight Pipe and Elbow with Local Wall Thinning,' Nuclear Engineering and Design, Vol. 211, pp. 91-103
Shim, D.J., Choi, J.B., and Kim, Y.J., 2004, 'Failure Strength Assessment of Pipes with Local Wall Thinning Under Combined Loading Based on Finite Element Analyses,' ASME Journal of Pressure Vessel Technology, Vol. 126, pp. 179-183
Kim, Y.J., Oh, C.K., Park, C.Y., and Hasegawa, K., 2006, 'Net-section Limit Load Approach for Failure Strength Estimates of Pipes with Local Wall Thinning,' International Journal of Pressure Vessels and Piping, Vol. 83, pp. 546-555
Roberston, A., Li, H. and Mackenzie, D., 2005, 'Plastic Collapse of Elbows Under Combined Internal Pressure and In-Plane Bending,' International Journal of Pressure Vessels and Piping, Vol. 82, pp. 407-416
Yahiaoui, K., Moffat, D.G. and Moreton, D.N., 2000, 'Piping Elbows with Cracks - a Parametric Study of the Influence of Crack Size in Limit Loads Due to Pressure and Opening Bending,' Journal of Strain Analysis, Vol. 35, pp. 35-46
Kim, Y.J. and Oh, C.S., 2006, 'Closed Form Plastic Collapse Loads of Elbows Under Combined Pressure and In-Plane Bending,' Engineering Fracture Mechanics, Vol. 73, pp. 1437-1454
ABAQUS Version 6.2-1. User's manual. Hibbitt, Karlsson and Sorensen, Inc, RI; 2001
Calladine, C.R., 1974, 'Limit Analysis of Curved Tubes,' Journal of Mechanical Engineering Science, Vol. 16, pp. 85-87
Kim, Y.J. and Oh, C.S., 'Effects of Attached Straight Pipes on Finite Element Limit Analysis of Pipe Bends,' International Journal of Pressure Vessels and Piping (electronic version available)
Goodall, I.W., 1978, 'Lower Bound Limit Analysis of Curved Tubes Loaded by Combined Internal Pressure and In-Plane Bending Moment,' CEGB report RD/B/N4360 Central Electricity Generating Board
Miller, A.G., 1988, 'Review of Limit Loads of Structures Containing Defects,' International Journal of Pressure Vessels and Piping, Vol. 32, pp. 191-327
Oh, C.K., Kim, Y.J. and Park, C.Y., 'Quantification of Axial Length Effects on Net-Section Limit Loads for Pipes with Local Wall Thinning Under Combined Pressure and Bending,' International Journal of Pressure Vessels and Piping (submitted)
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.