$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

초록
AI-Helper 아이콘AI-Helper

4종의 레진시멘트를 통한 상아질과 간접 레진 수복물 간의 인장결합강도를 열순환 시효처리 여부에 따라 측정하여 비교하고, 주사전자현미경 관찰을 통하여 각 레진시멘트의 접착 내구성을 평가하고자 시행하였다. 48개의 건전한 제3대구치의 상아질 표면을 평탄하게 노출시키고 #320 grit Sic Paper로 연마하였다. 복합레진 블록을 제작하여 #600 grit Sic Paper로 연마한 후에 접착면을 Sandblast로 처리하였다. 각각의 레진시멘트로 제조사 지침에 따라 적용하여 복합레진 블록을 상아질 표면에 접착하였다. 이후 제작된 시편을 열순환시키지 않거나, 1,000회, 5,000회 열순환 시킨 후 ($5^{\circ}C\;-\;55^{\circ}C$) 미세인장결합강도를 측정하였다. 열순환 전 시편의 접착계면 (수직절단면)과 파절된 시편의 상아질 파단면을 전자현미경 관찰하여 다음과 같은 결론을 얻었다. 1. Variolink II의 결합강도는 다른 실험군보다 높은 결합강도를 보여주었으며, 1,000회 열순환 후 유의성 있게 결합강도가 감소되었다 (p < 0.05). 3. Multilink의 결합강도는 열순환에 가장 많은 영향을 받았으며 1,000회 열순환 이후 유의성 있게 감소되었다 (p < 0.05). 3. Panavia F 2.0과 Rely X Unicem의 결합강도는 열순환에 의하여 감소되지 않았다 (p > 0.05). 4. 접착형 레진시멘트는 복합레진형 레진시멘트에 비해서 열처리 전후 모두 낮은 결합강도를 보여주었다. 5. 결합강도가 높은 Vaviolink II와 Multilink에서는 혼합형 파괴양상을 보였고, 결합강도가 낮은 Panavia F 2.0에서는 접착성 파괴 양상을 나타내었다. 이상의 연구 결과를 토대로 적절한 전처리와 접착제를 도포한다면 복합레진형 레진시멘트는 접착형 레진시멘트보다 결합강도와 그 내구성이 우수하다고 할 수 있을 것이다. 접착성 간접 수복물의 초기 결합강도와 내구성은 레진시멘트의 접착과정과 종류, 형태에 의해 영향을 받기 때문에 이들의 적절한 선택과 올바른 사용이 성공적인 수복을 위해 중요하다.

Abstract AI-Helper 아이콘AI-Helper

The objectives of this study was to evaluate the durability of 4 resin cements by means of microtensile bond strength test combined with thermocycling method and fractographic FE-SEM analysis. Experimental groups were prepared according to thermocycling (0, 1,000, 5,000) and the kind of resin cement...

주제어

참고문헌 (34)

  1. Manhart J, Scheibenhogen Fuchsbrunner A, Chen HY, Hiekel R. A 2-year clinical study of composite and ceramic inlays. Olin Oral Invest 4: 192-8, 2000 

  2. Peumans M, Van Meerbeek B, Lambrechts P, Vanherle G. Porcelain Veneers: a review of the literature. J Dent 28:163-77, 2000 

  3. Mitchell CA, Abbariki M, Orr JF. The influence of luting cement on the probabilities of survival and modes of failure of cast full-coveraged crowns. Dent Mater 16:198-206, 2000 

  4. Knox J, Kralj B, Hubsch PF, Middleton J, Jones ML. An evaluation of the influence of orthodontic adhesive on the stresses generated in a bonded bracket finite element model. Am J Ortho Dent Orthop 119:43-53, 2001 

  5. el-Mowafy O, Rubo MH. Retention of a posterior resinbonded fixed partial denture with a modified design : an in vitro study. Int J Prosthod 13:425-31. 2000 

  6. Carvalho RM, Pegoraro TA, Tay FR. Pegoraro LF, Pashley DH. Adhesive permeability affects coupling of resin cements that utiliseself-etching primers to dentine. J Dent 32:55-65, 2004 

  7. Kramer N, Lohbauer D, Frankenberger R. Adhesive luting of indirect restorations. Am J Dent 13:60D-76D, 2000 

  8. Hasegawa EA, Boyer DB, Chan DC. Hardening of dual-cured cements under composite resin inlays. J Prosthet Dent 66:187-92, 1991 

  9. el-Badrawy WA, el-Mowafy OM. Chemical versus dual curing of resin inlay cements, J Prosththet Dent 73:515-24, 1995 

  10. Primenta LAF, Amaral CM, Bredrane de Castro AKB, Ritter AV. Stability of dentin bond strengths using different bonding techniques after Total-etch, deproteinization and self-etching. Oper Dent 29:592-598 

  11. Paul SJ, Welter DA, Ghazi M, Pashley D. Nanoleakage at the dentin adhesivevs. microtensile bond strength. Oper Dent 24:181-188, 1999 

  12. Giannini M, Seixas CAM, Reis AF, Pimenta LAF. Six-month storage-time evaluation of one-bottle adhesive systems to dentin. J Esth Rest Dent 15:43-49, 2003 

  13. Tay FR. Pashley DH, Yoshiyama M. Two mondes of nanoleakage expression in single-step adhesives. J Dent Res 81 :472-476, 2002 

  14. Sano H. Yoshikawa T, Pereira PNR, Kanemura N, Morigami M, Tagami J, Pashley D. Long-term Durability of dentine bonds made with a self-etching primer. J Dent Res 78:906-911, 1999 

  15. Kato G, Nakabayashi N. The durability of adhesion to phosphoric acid etched, wet dentine substrates. Dent Mater 14:347-352, 1998 

  16. Hakimeh S, Vaidyanathan J, Houpt ML, Vaidyanathan TK, Hagen SV. Microleakage of compomer class V restorations: effect of load cycling, thermal cycling, and cavity shape differences. J Prosthet Dent 83: 194-203, 2000 

  17. Wendt SL, Mcinnes PM, Dickinson GL. The effect of thermocycling in microleakage analysis. Dent Mater 8: 181-184, 1992 

  18. Miyazaki M, Sato M, Onose H. Moore BK. Influence of thermal cycling on dentin bond strength of two-step bonding systems. Am J Dent 11: 118- 122, 1998 

  19. Hashimoto M, Ohno H. Kaga M, Endo K, Sano H. Oguchi H. In vivo degradation of resin-dentin bonds in humans over 1 to 3 years. J Dent Res 79:1385-1391. 2000 

  20. Krejci I, Lutz F. Mixed class V restorations: the potentials of dentine bonding. J Dent 18:263-270, 1990 

  21. Suh BI, Feng L, Pashley DH. Tay FR. Factors contributing to the incompatibility between simplified-step adhesives and chemically-cured or dual-cured composites. Part III. Effect of acidic resin monomers. J Adhes Dent 5:267-282, 2003 

  22. Attal JP, Asmussen E, Degrange M. Effects of surface treatment on the free surface energy of dentin. Dent Mater 10:259-264, 1994 

  23. Tay FR. Pashley DH. Aggressiveness of contemporary self-etching systems. I: Depth of penetration beyond dentin smear layers. Dent Mater 17:296-308, 2001 

  24. Frankenberger R, Strobel WO, Lohbauer U, Kramer N, Petschelt A. The effect of six years of water storage on resin composite bonding to human dentin. J Biomed Mater Res Part B: Appl Biomater 69:25-32, 2004 

  25. Armstrong SR, Vargas MA, Fang Q, Laffoon JE. Microtensile bond strength of a total-etch 3-step, total-etch 2-step, self-etch 2-step, and a self-etch 1-step dentin bonding system through 15-month water storage. J Adhes Dent 5:47-56, 2003 

  26. Tay FR. Pashley DH. Dental adhesives of the future. J Adhes Dent 4:91-103, 2002 

  27. Brackett MG, Dib A. Brackett WW, Estrada BE, Reyes AA. One-year clinical performance of a resin-modified glass ionomer and a resin composite restorative material in unprepared Class V restorations. Oper Dent 27: 112-6, 2002 

  28. Turkun SL. Clinical evaluation of a self-etching and a one-bottle adhesive system at two years. J Dent 31: 527-534, 2003 

  29. Takahashi A, Inoue S, Kawamoto C, Ominato R, Tanaka T, Sato Y, Pereira PNR. Sano H. In vivo long-term durability of the bond to dentin using two adhesive systems. J Adhes Dent 4:151-159, 2002 

  30. Miyazaki M, Sato M, Onose H. Moore BK. Influence of thermal cycling on dentin bond strength of two-step bonding systems. Am J Dent 11: 118-122, 1998 

  31. Nikaido T, Kunzelman KH. Chen H, Ogata M, Harada N, Yamaguchi S, Cox CF, Hickel R, Tagami J. Evaluation of thermal cycling and mechanical loading on bond strength of a self-etching primer system to dentin. Dent Mater 18:269-275, 2002 

  32. Jan DM, Marcos V, Kirsten VL, Kazuhiro H. Paul L, Bart VM. Bonding of an auto-adhesive luting material to enamel and dentin. Dent Mater 20:963-971. 2004 

  33. Bin Y, Klaus L, Rainer A. Matthias K. Microtensile bond strength of three luting resins to human regional dentin. Dent Mater 22:45-46, 2006 

  34. 김도완, 최경규, 박상진. 자가부식형 상아질접착제와 레진시멘트와의 적합성에 관한 연구. 대한치과보존학회지 30:493-504, 2005 

저자의 다른 논문 :

섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로