최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기韓國地盤工學會論文集 = Journal of the Korean geotechnical society, v.24 no.1, 2008년, pp.119 - 130
김창동 ((주)이제이텍 토목설계부) , 김수일 (연세대학교 토목공학과) , 이준환 (연세대학교 토목공학과) , 김병일 ((주)이제이텍 기술연구소)
Uncertainties in physical and engineering parameters for the design of shallow foundations arise from various aspects such as inherent variability and measurement error. This paper aims at investigating and reducing uncertainty from deterministic method by using the reliability-based design of shall...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
김병일, 김연수, 김창동, 사상호 (2007). 설계 파라미터의 불확실성을 고려한 얕은기초 신뢰성 설계, 한국지반공학회 기초기술위원회 학술발표회 논문집, pp.1-10
한국지반공학회 (2003). 구조물 기초설계기준 해설, 한국지반공학회, pp.177-276
허정언, 정상섬, 곽기석 (2005), 축하중을 받는 말뚝구조물의 MCS에 기초한 신뢰성해석, 한국지반공학회 논문집, 제25권 3C호, pp.181-188
AASHTO (2007). AASHTO LRFD Bridge Design Specifications, SI Units, 4th Edition, American Association of State Highway and Transportation Officials, Washington, D. C.
Baecher, G. B., and Christian, J. T. (2003). Reliability and Statistics in Geotechnical Engineering, John wiley, Chichester, U.K.
CEN (European Committee for Standardisation (2004). Eurocode 7: Geotechnical design-Part 1: General rules, BS EN 1997-1, London
Christian, J. T., Ladd, C. C. and Baecher, G. B. (1994). Reliability applied to slope stability analysis, Journal of Geotechnical Engineering, ASCE, Vol.120, No.12. pp.2189-2207
Hansen, J. B. (1970). A revised and extend formula for bearing capacity. Danish Geotech. Inst., Bulletin 28, Copenhagen
Harr, M. E. (1966). Foundation of Theoretical Soil Mechanics, McGraw-Hill Book Company, New York
Harr, M. E. (1987). Reliability-Based Design in Civil Engineering, McGraw-Hill Book Company, New York
Hasofer, A. M. and Lind, N. (1974). An exact and invariant first-order reliability format. Journal of Engineering Mechanics, ASCE, Vol. 100, EM 1, pp.111-121
Hooper, J.A., and Butler, F.G. (1966), Some Numerical Results Concerning the Shear Strength of London Clay, Geotechnique, Vol.16, pp.282-304
Kulhawy, F. H., Birgisson, B. and Grigoriu, M. D. (1992). Reliability-based foundation design for transmission line structures: Transformation models for in-situ tests. Rpt EL-5507(4). Electric Power Research Institute, Palo Alto
Lacasse, S. and Nadim, F., (1996), Uncertainties in characterising soil properties, Uncertainty in the geologic environment: From theory to practice, ASCE GSP No.58, pp.49-75
Low, B. K., and Tang, W. H. (1997a). Efficient Reliability Evaluation using Spreadsheet, Journal of Engineering Mechanics, Vol.123, No.7, pp.749-752
Low, B. K., and Tang, W. H (1997b). Reliability Analysis of Reinforced Embankments on Soft Ground. Canadian Geotechnical Journal, 345, pp.672-685
Lumb, P. (1966). The variability of natural soils, Canadian Geotechnical Journal, Vol.3, pp.74-97
Mcguffery, Iori, V.J., Kyfor, Z., and Grivas, D.A. (1981), Statistical Geotechnical Prop erties of Lockp ort Clays, Transportation Research Board, No.809. pp.54-59
Meyerhof, G. G. (1970), Safety Factors in Soil Mechanics, Canadian Geotechnical Journal, Vol.5, No.2, pp.140-148
Palisade corporation (2002). Guide to using @Risk, http://www.palisade.com
Rackwitz, R. and Fiessler, B. (1978). Structural reliability under combined load sequences, Computers and Structures, Vol.9, pp.489-494
Schultze, E. (1971), Frequency Distributions and Correlations of Soil Properties, Proceedings of the First International Conference on Application of Statistics and Probability to Soil and Structural Engineering, pp.371-387
Turnbull, W.J., Compton J.R., and Ahvin R.G. (1966), Quality Control of Comp acted Earthwork, Journal of Soil Mechanics and Foundation Division, ASCE, Vol.92, No.SM5, pp.142-145
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.