최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. A. A, v.32 no.5 = no.272, 2008년, pp.387 - 395
이성철 (포항공과대학교 대학원 기계공학과) , 김기태 (포항공과대학교 기계공학과)
Stress distribution and interfacial debonding process at the interface between a rubber mold and a powder compact were analyzed during unloading under cold isostatic pressing. The Cap model proposed by Lee and Kim was used for densification behavior of powder based on the parameters involved in the ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
고무몰드를 이용한 냉간 정수압 성형의 장점은? | 금형압축공정을 이용하여 복잡한 형상의 제품을 성형할 경우 균일한 압력으로 성형할 수 없으므로 성형체 내부의 불균일한 밀도 구배를 초래하기 쉽고 이는 소결공정중 불균일한 수축과 크랙을 발생시킬 수 있다. 그에 반해 고무몰드를 이용한 냉간 정수압 성형은 공정이 복잡한 단점이 있으나 고무의 등방성 성질과 비압축성 및 대변형의 성질을 이용함으로써 비교적 균일한 밀도를 갖는 정밀정형 제품 제조가 가능하다. | |
금형압축공정의 단점은? | 금속이나 세라믹 분말을 이용하여 복잡한 형상의 부품을 제조하기 위하여 일반적으로 금형압축공정이나 정수압공정이 요구된다. 금형압축공정을 이용하여 복잡한 형상의 제품을 성형할 경우 균일한 압력으로 성형할 수 없으므로 성형체 내부의 불균일한 밀도 구배를 초래하기 쉽고 이는 소결공정중 불균일한 수축과 크랙을 발생시킬 수 있다. 그에 반해 고무몰드를 이용한 냉간 정수압 성형은 공정이 복잡한 단점이 있으나 고무의 등방성 성질과 비압축성 및 대변형의 성질을 이용함으로써 비교적 균일한 밀도를 갖는 정밀정형 제품 제조가 가능하다. | |
동종 분말도분말에 따라 삼축 압축실험을 재실행해야 하는 단점이 존재하는 이유는 무엇때문인가? | 본 논문에서는 고무몰드를 이용한 정수압 성형공정시 분말의 치밀화를 예측하기 위해서 Lee 와 Kim(16)이 제안한 Cap 모델을 사용하였다. 일반적인 Cap 모델은 삼축압축실험을 수행하여 일반응력 (p, q)평면에서 상대밀도 실험치에 대해 모델 계수를 결정한다. 따라서 동종 분말이라도 분말에 따라 삼축 압축실험을 재실행해야 하는 단점이 존재한다. |
Kwon, Y. S., Lee, H. T., and Kim, K. T., 1997, “Analysis for Cold Die Compaction of Stainless-Steel Powder,” Journal of Engineering Materials and Technology, Vol. 119, pp. 366-373
Michrafy A., Dodds, J. A., and Kadiri, M. S., 2004, “Wall Friction in the Compaction of Pharmaceutical Powders: Measurement and Effect on the Density Distribution,” Powder Technology, Vol. 148, pp. 53-55
Briscoe, B. J. and Rough, S. L., 1998, “The Effects of Wall Friction on the Ejection Pressed Ceramic Parts,” Powder Technology, Vol. 99, pp. 228-233
Kim, H. G., Lee, J. W., and Kim, K. T., 2001, “The Effect of a Rubber Mold on Densification and Deformation of a Metal Powder Compact during Cold Isostatic Pressing,” Materials Science and Engineering, Vol. A318, pp. 174-182
Yang, H. C., Lee, J. W., and Kim, K. T., 2004, “Rubber Isostatic Pressing of Metal Powder under Warm Temperatures,” Powder Technology, Vol. 139, pp. 240-251
Shima, S., Sakamoto, Y., and Kotera, H., 2002, “Simulation of Rubber Isostatic Pressing and Shape Optimization of Rubber Mold,” International Journal of Mechanical Sciences, Vol. 44, pp. 1603-1623
Gu, Y., Henderson, R. J., and Chandler, H. W., 2006, “Visualizing Isostatic Pressing of Ceramic Powders Using Finite Element Analysis,” Journal of the European Ceramic Society, in press
Johnson, K. L., Kendall, K., and Roberts, A. D., 1971, “Surface Energy and the Contact of Elastic Solids,” Proceedings of the Royal Society of London Series A., Vol. 324, pp. 301-313
Bhushan, B., 2003, “Adhesion and Stiction: Mechanism, Measurement Techniques, and Methods for Reduction,” Journal of Vacuum Science and Technology B, Vol. 21, pp. 2262-2296
McFarlane, S., Tabor, D., 1950, ”Adhesion of Solids and the Effect of Surface Films,” Proceedings of the Royal Society of London Series A, Vol. 202, pp. 224-243
Needleman, A., 1990, “An Analysis of Decohesion Along an Imperfect Interface,” International Journal of Fracture, Vol. 42, pp. 21-40
Ghosh, S., Ling, Y., Majumdar, B. S., and Kim, R., 2000, “Interfacial Debonding in Multiple Fiber- Reinforced Composites,” Mechanics of Materials, Vol. 32, pp. 561-591
Camacho, G. T. and Ortiz, M., 1996, “Computational Modeling of Impact Damage in Brittle Materials,” International Journal of Solids and Structures, Vol. 33, pp. 2899-2938
Swaminathan S. Pagano, N. J., and Ghosh, S., 2006, “Analysis of Interfacial Debonding in Three-Dimensional Composite Microstructures,” Journal of Engineering Materials and Technology, Vol. 128, pp. 96-106
Kumar, P. R., Jagota, A., Bennison, S. J., and Saigal, S., 2000, “Interfacial Failures in a Compressive Shear Strength Test of Glass/Polymer Laminates,” International Journal of Solids and Structures, Vol. 37, pp. 7281-7305
ABAQUS User’s I and II Manual, Hibbitt, Karlsson, and Sorensen, 2005
Shima, S. and Mimura, K., 1986, “Densification Behavior of Ceramic Powder,” International Journal of Mechanical Sciences, Vol. 28, No. 1, pp. 53-59
Henderson, R. J. and Moriarty B., 2002, “Finite Element Modelling of Decompression after Isostatic Pressing,” Proceedings of the Institution of Mechanical Engineers Part B, Vol. 215, pp. 215-224
Egleton P. The Post-aging Mechanical Behavior of Some Elastomers. PhD thesis, University of Aberdeen, 2000
Yeoh O. H., 1993, “Some Forms of Strain Energy Density Function for Rubber,” Rubber Chemistry and Technology, Vol. 66, pp. 754-771
Wan-Doo Kim, Wan-Soo Kim, Chang-Soo Woo and Hak-Ju Lee, 2001, “Experimental Testing of Rubber Materials for Finite Element Analysis,” Proc. Of the KSME 2001 Spring Annual Meeting A, pp. 704-709
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.