다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기
한국자동차공학회논문집 = Transactions of the Korean Society of Automotive Engineers, v.16 no.3, 2008년, pp.144 - 150
서준호 (고려대학교) , 나병철 (자동차부품연구원) , 김진용 (자동차부품연구원) , 박승욱 (자동차부품연구원) , 임대순 (고려대학교)
AI-Helper
This research aims to develop parts for advanced fuel/oil filtering re-circulation applicable to this kind of regulation proof engines. These parts can playa role of converting traditional air emission type crankcase into recovery type crankcase so that the engine can deal with environmental regulat...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
O.-H. Kwon, Y.-W. Lee, S.-M. Song, J.-H. Lee and J.-W. Kang, "The Effect of In-outlet Differential Pressure on a Valve Body Stress and Deformation by the Blow-by Gas Flow Characteristic in the PCV Valve for Automobile," Journal of the Korean Society of Safety, Vol.20, No.1, pp.36-41, 2005
Y.-N. Chun and T.-I. Ohm, "Numerical Study of Cyclone Dust Collector," J. KAPRA, Vol.12, No.1, pp.43-53, 1996
J.-D. Chung, S.-G. Lee and M. Bohnet, "A Study of High Particle Collection Efficiency of Cyclone," KSME Annual Spring Conference, Vol.1, pp.2227-2232, 2003
D. Leith and W. Licht, "The Collection Efficiency of Cyclone Type Particle Collectors - A New Theoretical Approach," AICHE Symp. Series, Vol.8, No.2, pp.196-206, 1981
M. Bohnet, "Cyclone Separators for Fine Particles and Difficult Operating Conditions," KONA, Power and Particle No.12, pp.69-76, 1994
R. Clift,M. Ghadiri and A. C. Hoffman, "A Critique of Two Models for Cyclone Performance," AIChE Journal, Vol.37, No.2, pp.285-289, 1991
H. Mothe and F. Loffler, "Prediction of Particle Removal in Cyclone Separator," Int. Chem. Eng., Vol.28, pp.231-240, 1988
C. E. Lapple and C. B. Shepherd, "Flow Pattern and Pressure Drop in Dust Cyclone Separator," Ind. & Eng. Chem., Vol.31, No.8, pp.43-53, 1939
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.