최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국방재학회논문집 = Journal of the Korean Society of Hazard Mitigation, v.8 no.4, 2008년, pp.91 - 100
김형준 (한양대학교 일반대학원 토목공학과) , 이승오 (홍익대학교 공과대학 건설도시공학부) , 조용식 (한양대학교 공과대학 도시건설환경공학부)
Numerical implementation with a Cartesian cut-cell method is conducted in this study. A Cartesian cut-cell method is an easy and efficient mesh generation methodology for complex geometries. In this method, a background Cartesian grid is employed for most of computational domain and a cut-cell grid ...
김대홍, 조용식 (2005) 불규칙 지형에 적용가능한 쌍곡선형 천수 방정식을 위한 개선표면경사법. 대한토목학회논문집, 대한토목 학회, 제25권, pp. 223-229
윤태훈, 강석구, 이지송 (2002) 본류 수위 급상승에 의한 지류 역류 해석. 대한토목학회논문집, 대한토목학회, 제22권, pp. 33-41
Bellos, C., Soulis, J. V. and Sakkas, J. G. (1992) Experimental Investigation of Two-Dimensional Dam-Break Flows. J. of Hydraulic Research, Vol. 30, No. 1, pp. 47-63
Billet, S. J. and Toro, E. F. (1997) On the Accuracy and Stability of Explicit Schemes for Multidimensional Linear Homogeneous Advection Equations. Journal of Computational Physics, Vol. 131, pp. 247-250(4)
Causon, D. M., Ingram, D. M., and Mingham, C. G. (2001) A Cartesian cut cell method for shallow water flows with moving boundaries. Adv. Water Resour., Vol. 24, pp. 899-911
Causon, D. M., Ingram, D. M., Mingham, C. G., Yang, G., and Pearson, R. V. (2000) Calculation of shallow water flows using a Cartesiancut cell approach. Adv. Water Resour., Vol. 23, pp. 545-562
Fraccarollo, L. and Toro, E. F. (1995) Experimental and numerical assessment of the shallow water model for two-dimensional dam-break type problems. J. Hydraul. Res. Vol. 33, pp. 843-864
Gao, F., Ingram, D. M., Causon, D. M. and Mingham, C. G. (2006) The development of a Cartesian cut cell method for incompressible viscous flows. Int. Journal for Numerical method in fluids, Vol. 54, pp. 1033-1053
Ingram, D. M., Causon, D. M. and Mingham C. G. (2003) Development in Cartesian cut cell methods. Math. and Computers in simulation, Vol. 61 pp. 561-572
Lynch, D. R. and Gray, W. G. (1978) Analytic solutions for computer flow model testing. Journal of the Hydraulic Division, ASCE, Vol. 104, No. HY10, pp. 1409-1428
Morris, M. (2000 CADAM: Concerted action on dambreak modeling- Final report. Rep. No. SR 571, HR Wallingford
Toro, E. F. (1999) Riemann solvers and numerical methods for fluid dynamics. Springer
Qian, L., Causon, D. M., Ingram, D. M. and Mingham, C. G. (2003) Cartesian cut cell two-fuid solver for hydraulic flow problems. Journal of Hydraulic Engineering. Vol. 129, pp. 688?696
Qian, L., Causon, D. M., Ingram, D. M., Mingham, C. G., and Zhou, J. G. (2001) A Cartesian cut cell method for incompressible viscous flows. Proc., European Community on Computational Methods in Applied Sciences (ECCOMAS), CFD 2001, Institute of Mathematics and its Applications, Southend-on Sea, U.K
Yang, G., Causon, D. M. and Ingram, D. M. (2000) Calculation of compressible flows about complex moving geometries using a three-dimensional Cartesian cut cell method. Int. Journal for Numerical Methods in Fluids, Vol. 33, pp. 1121-1151
Zhou, J. G., Causon, D. M., Mingham, C. G. and Ingram, D. M. (2004) Numerical prediction of dam-break flows in general geometries with complex bed topography. Hydraulic Engineering, Vol. 130, No. 4, pp. 332?340
※ AI-Helper는 부적절한 답변을 할 수 있습니다.