최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국공작기계학회논문집 = Transactions of the Korean society of machine tool engineers, v.18 no.1, 2009년, pp.110 - 115
박기범 (창원대학교 기계설계공학과 대학원) , 정원지 (창원대학교 기계설계공학과) , 이춘만 (창원대학교 기계설계공학과)
In general, the radial error motion of a machine tool spindle system is effected on the accuracy of the parts to be made. This paper presents in milling process an investigation into spindle rotational accuracy effects on surface roughness of processing parts. We experimented the effects on spindle ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Hwang, Y. K. and Lee, C. M., 2007, "A Study on the Spindle Run-out Effects on Cutter Mark and Surface Roughness," KSMTE, Vol. 16, No. 2, pp. 84-91.
Kim, B. K., Park, H. B., Lee, D. W., Kim, J. S., and Jung, Y. H, 1999, "A study on Evaluation of Machinability Using Cutter Runout in Ball-end Milling," KSPE, Vol. 16, No. 10, pp. 35-44.
Lion Precision, 2007, Instruction Manual of SEA, Spanish Edition.
Cho, H. Y., Jung, J. Y., Lee, C. M., Go, T. J., and Chung, W. J., 2003, "Optimaization of Surface Roughness for High Speeding Machining," KSIE spring conference, pp. 198-202.
Wei, G. and Park, C. H., 2004, "High Precision Measurement of Rotational Accuracy," KSPE, Vol. 21, No. 8, pp. 7-13.
Kim, J. D., Kim, K. S., Lee, D. W., and Kim, J. S., 1995, "Evaluation of Workability through Runout in End Milling," KSPE conference proc, pp. 165-168.
Kim, J. D., 1996, "Detection and Estimation of Spindle Accuracy of Machine Tools by Non-contact Type Sensor," KSMTE, Vol. 5, No. 2, pp. 9-19.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.