최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.26 no.3 = no.216, 2009년, pp.47 - 54
이승표 (한양대학교 기계설계학과 대학원) , 강형주 (주식회사 아이엠에스) , 하성규 (한양대학교 기계정보경영공학부)
In the manufacturing industry, there has been a significant increase in the use of coordinate measuring machines(CMM). In this paper, the sources of CMM measurement performance are discussed. The effects of workpiece position, length and orientation are analyzed by using the design of experiments. B...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Wilhelm, R. G., Hocken, R. and Schwenke, H., "Task specific uncertainty in coordinate measurement," Annals of CIRP, Vol. 52, No. 2, pp. 553-563, 2001
Weckenmann, A., Knauer, M. and Kunzmann, H., "The influence of measurement strategy on the uncertainty of CMM-measurements," Annals of CIRP, Vol. 47, No. 1, pp. 451-454, 1998
Feng, C. X. and Shang, X., "Computer-aided reverse engineering with CMM for digitization and LOM for duplication," Proceedings of the 4th InternationalConference on Frontiers of Design and Manufacturing, pp. 256-262, 2000
Kim, E. S., Lee, J. M. and Kim, B. M., "Selection of the Optimum Seaming Condition for Spin Drum Using Statistical Method," Journal of the KoreanSociety for Precision Engineering, Vol. 25, No. 1, pp. 99-107, 2008
Baek, S. H., Hong, S. H., Joo, W. S., Kim, C. K.,Jeong, Y. Y. and Shin, S. W., "Optimization of Process Parameters for Mill Scale Recycling Using Taguchi Method," Journal of the Korean Society for Precision Engineering, Vol. 25, No. 2, pp. 88-95, 2008
Hwang, Y. K., Chung, W. J. and Lee, C. M., "Experimental Study of Cutting Force and Surface Roughness Prediction in MQL Turning of Al 6061," Journal of the Korean Society for Precision Engineering, Vol. 25, No. 6, pp. 159-167, 2008
Osawa, S., Busch, K., Franke, M. and Schwenke, H., "Multiple orientation technique for calibration of cylindrical workpieces on CMMs," Precision Engineering, Vo. 29, No. 1, pp. 56-64, 2005
Zhang, G., Veale, R., Charlton, T., Borchardt, B. and Hocken, R., "Error compensation of coordinate measuring machines," Annals of CIRP, Vol. 34, No. 1, pp. 445-448, 1985
Limaiem, A. and Elmaraghy, H. A., "Integrated assessibility analysis and measurement operations sequencing for CMMs," J. Manuf. Syst., Vol. 19, No.2, pp. 83-93, 2000
Lee, E. S., "A Study on the Volumetric Error Equation of Coordinate Measuring Machines and their Application," Transactions of the Korean Society of Mechanical Engineers, Vol. 19, No. 6, pp. 1545-1553, 1995
Montgomery D. C., 'Design and analysis of experiments,' Willey, pp. 228-249, 1991
Emanuel, J. T. and Muruganandan, P., "Sequential experimentation using two-level fractional factorials," Quality Engineering, Vol. 13, No. 3, pp. 335-346, 2000
Park, S. H., "Modern design of experiments," Minyongsa, pp. 121-140, 2001
International Organization for Standardization, "ISO 10360, Coordinate metrology, part 2," pp. 1-4, 1994
※ AI-Helper는 부적절한 답변을 할 수 있습니다.