최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국철도학회 논문집 = Journal of the Korean Society for Railway, v.12 no.5 = no.54, 2009년, pp.719 - 724
김승철 (한국철도기술연구원, 철도구조연구실) , 김정석 (한국철도기술연구원, 철도구조연구실) , 윤혁진 (한국철도기술연구원, 철도구조연구실) , 서승일 (한국철도기술연구원, 철도구조연구실)
In this study, DCB(double cantilever beam) specimens of woven fabric carbon/epoxy and glass/epoxy were manufactured and mode I fracture toughness of specimen was measured according to ASTM 5528-01. And FE analysis was conducted in the same condition and evaluated the behavior of delamination analyti...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
김정석, 정종철, 이상진(2005), "하이브리드 복합재 철도차량 차체에 대한 시험적 연구," 한국복합재료학회지, 제 18권, 제 6호, pp. 19-25
윤성호, 허광수, 정종철, 김정석, 한성호(2005), "틸팅차량 차체용 복합재 구조재에 대한 모우드I 변형 하의 손상허용 평가 기법 연구," 한국철도학회논문집, 제8권, 제6호, pp.573-580
Andras Szekrenyes, "Overview on the experimental investigations of the fracture toughness in composite materials," HEJ
Nidal Alif, Leif A. Carlsson, John W. Gillespie, Jr.(1997),"Mode I, Mode II, and Mixed Mode interlaminar fracture of woven fabric carbon/epoxy," Composite Materials : Testing and design, Thirteenth Volume, ASTM STP 1242, S.J. Hooper,Ed., American Society for Testing Materials, pp. 82-106
Dan Mihai Constantinescu, Nicolae Constantin, Thomas Goss, 'Experimental evaluation of Mode I and Mode II interlaminar fracture toughness of textile composites.'
Panuwat Suppakul, Sri Bandyopadhyay(2002), "The effect of weave pattern on the mode-I interlaminar fracture energy of E-glass/viny1 ester composites," Composites Science and Technology, Vol. 62, pp. 709-717
Adrians F Gill, Paul Robinson, Silvetre Pinho(2009), "Effect of variation on fibre volume fraction on Mode I & II delamination behaviour of 5HS woven composites manufactured by RTM," Composites Science and Technology, in press
Emile S. Greenhalgh, Charlotte Rogers, Paul Robinson(2009), "Fractographic observations on delamination growth and the subsequent migration through the laminate," Composites Science and Technology, in press
J. W. H. Yap, M. L. Scott, R.S. Thomson and D. Hachenberg(2002), "The analysis of skin-to-stiffener debonding in composiye aerospace structures." Composite Structures, Vol. 57, No. 1, pp 425-435
J. W. H. Yap, M. L. Scott, R.S. Thomson and D. Hachenberg(2004), "Influence of postbucking behaviour of composite stiffened pannels on the damage criticality," Composite Structures, Vol. 66, pp. 197-206
R. Krueger, M. K. Cvikovich, T. K. O'Brien and P. J. Minguet(2000), "Testing and Analysis of composite Skin/Stringer Debonding Under Multi-Axial Loading," Journal of composite Materials, Vol. 34, No. 15, pp. 1263-1300
P.P Camanho, C. G. Davila and S. T. Pinho(2004), "Fracture analysis of composite cocuredstructural joint using decohesive element," Fatigue Fract. Mater. Struct., Vol. 27, pp. 745-757
ASTM D5528-01(2001), "Standard test method for Mode I interlaminar fracture toughness of unidirectional fiber-Reinforced polymer matrix Composites," American Society for Testing Materials, Vol. 15.03
Ted Diehl(2007), "On using a penalty-based cohesive-zone finite element approach, Part I : Elastic solution benchmarks," J Adhes, Vol 28, pp. 237-255
P.P Camanho, C. G. Davila and M. F. De Moura(2002), "Numerical Simulation of Mixed-mode Progressive Delamination in Composite Materials," Journal of composite Materials, Vol. 37, No. 16/2003, pp. 1415-1424
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.