최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국공작기계학회지 = Journal of the Korean society of machine tool engineers, v.18 no.6, 2009년, pp.585 - 589
Extruder is divided to greatly three part at extrusion process. First, by hopper(Hopper) second, barrel(Barrel) with Screw that is point of extruder and third that is raw material supply wealth extrusion into dies(DIES) Part that decide shape of do product greatly divide. Hopper is role that distrib...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Varady, T., Ralph, R., and Jordan, C., 1997, "Reverse engineering of geometric models an introduction," Computer-Aided Design, Vol. 29 No. 4, pp. 255-268.
Piegl, L. and Tiller, W., 1996, "Algorithm for approximate NURBS skinning," Computer-Aided Design, Vol. 28, No. 9, pp. 699-706.
Werner, A., Skalski, K., Piszezatowski, S., Swieszkowski, W., and Lechmiak, Z., 1998, "Reverse engineering of free-from surfaces," Journal of Materials Processing Technology, Vol. 76, pp. 128-132.
Liu, S. and MA, W. 1999, "seep-growing segmentation of 3-D surfaces from CT-contour date," Computer-Aided Design, Vol. pp. 517-536.
Yoon, J. B., 2000, "Simulation of Heat and Fluid Flow in the Single Screw Extruder with Coupling of the Metering Section and Die". Graduate School, Hanyang Univ
Yoon, J. Y., Hwang, Y. K., Park, J. S., Ko, T. J. and Park, J. W., 2002, "An Integrated CAD System for Design of Extruder Screw," Journal of Korean Society of Precision Engineering, Vol. 19, No. 8., p. 100.
Kim, C. K., Cho, S. H. , 2002, "Numerical Study on the Behavior Characteristics of a Screw in Injection Molding Machine," J. of KSMTE, Vol. 11, No. 5, pp. 30-37.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.