강교 제작에는 강재 표면의 이물질 제거와 피복방식재료의 부착성 증대를 위하여 블라스트 표면처리가 실시되고 있다. 블라스트 표면처리는 쇼트나 그릿 등의 연마재를 압축공기로 분사하여 강재 표면에 충격을 가하는 표면처리법으로, 블라스트 처리에 의해 표면형상이 개선되고 압축잔류응력이 도입되어 용접이음의 피로수명이 향상될 것으로 예상된다. 본 연구에서는 하중비전달형 십자필렛 용접이음의 피로실험을 실시하여, 블라스트 표면처리가 용접이음의 피로거동에 미치는 영향을 실험적으로 검토하였다. 피로실험에는 용접 후 무처리 시험편(용접 그대로), 용접 후 블라스트 표면처리 한 시험편과 블라스트 처리 후 열처리에 의해 잔류응력을 제거한 시험편의 합계 3종류의 용접시험편을 대상으로 하였다. 그 결과 블라스트 표면처리에 의해 용접지단부의 곡률반경은 약 29% 증가하였으며, 용접지단부의 인장잔류응력이 제거되고 압축잔류응력이 도입되었다. 그리고 블라스트 처리에 의해 피로수명과 피로한계가 증가하였다. 피로수명은 응력범위가 낮을수록 더 크게 증가하였고, 피로한계는 약 1.5배 증가하였다.
강교 제작에는 강재 표면의 이물질 제거와 피복방식재료의 부착성 증대를 위하여 블라스트 표면처리가 실시되고 있다. 블라스트 표면처리는 쇼트나 그릿 등의 연마재를 압축공기로 분사하여 강재 표면에 충격을 가하는 표면처리법으로, 블라스트 처리에 의해 표면형상이 개선되고 압축잔류응력이 도입되어 용접이음의 피로수명이 향상될 것으로 예상된다. 본 연구에서는 하중비전달형 십자필렛 용접이음의 피로실험을 실시하여, 블라스트 표면처리가 용접이음의 피로거동에 미치는 영향을 실험적으로 검토하였다. 피로실험에는 용접 후 무처리 시험편(용접 그대로), 용접 후 블라스트 표면처리 한 시험편과 블라스트 처리 후 열처리에 의해 잔류응력을 제거한 시험편의 합계 3종류의 용접시험편을 대상으로 하였다. 그 결과 블라스트 표면처리에 의해 용접지단부의 곡률반경은 약 29% 증가하였으며, 용접지단부의 인장잔류응력이 제거되고 압축잔류응력이 도입되었다. 그리고 블라스트 처리에 의해 피로수명과 피로한계가 증가하였다. 피로수명은 응력범위가 낮을수록 더 크게 증가하였고, 피로한계는 약 1.5배 증가하였다.
Blast cleaning has been applied in steel bridges for cleaning forged surface and increasing adhesive property of applied coating systems. Blasting is the operation of cleaning or preparing a surface by forcible propelling a stream of abrasive metals against it. Blast cleaning may improve surface geo...
Blast cleaning has been applied in steel bridges for cleaning forged surface and increasing adhesive property of applied coating systems. Blasting is the operation of cleaning or preparing a surface by forcible propelling a stream of abrasive metals against it. Blast cleaning may improve surface geometry and induce compressive residual stress, and eventually may increase fatigue life of weld joints. In this paper, fatigue tests were carried out on three types of non-load-carrying fillet welded cruciform joints, as-welded joints, blast-treated joints, and stress-relieved joints after blasting, in order to investigate effect of blast cleaning on fatigue behavior of the weld joints. By Blast cleaning, the weld toe radius was increased by 29% and compressive residual stress was induced near weld toes. Blast cleaning increased fatigue life and fatigue endurance limit of the weld joints. When the applied stress ranges decreased, the increment in fatigue life became larger. About a 150% increase in fatigue limit could be realized by using blast cleaning.
Blast cleaning has been applied in steel bridges for cleaning forged surface and increasing adhesive property of applied coating systems. Blasting is the operation of cleaning or preparing a surface by forcible propelling a stream of abrasive metals against it. Blast cleaning may improve surface geometry and induce compressive residual stress, and eventually may increase fatigue life of weld joints. In this paper, fatigue tests were carried out on three types of non-load-carrying fillet welded cruciform joints, as-welded joints, blast-treated joints, and stress-relieved joints after blasting, in order to investigate effect of blast cleaning on fatigue behavior of the weld joints. By Blast cleaning, the weld toe radius was increased by 29% and compressive residual stress was induced near weld toes. Blast cleaning increased fatigue life and fatigue endurance limit of the weld joints. When the applied stress ranges decreased, the increment in fatigue life became larger. About a 150% increase in fatigue limit could be realized by using blast cleaning.
AASHTO (1998) LRFD Bridge Design Specifications, Second Edition
American Society for Testing Materials(2003), Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel, ASTM D4417:03
Gurney, T. R. (1968) Effect of Peening and Grinding on the Fatigue Strength of Fillet Welded Joints, British Welding Journal. 15/12, pp. 601-609
Haagensen, P. J. (1993) The Effects of Grinding and Peening on the Fatigue Strength of welded T-Joint, International Institute of Welding, IIW Document, XIII-1510-93
Yamada, K., Kim, I. T., Ito, K.(2004) Fatigue Behavior of Inclined Non-load-carrying Fillet Welded Joints, Journal of Structural Mechanics and Earthquake Engineering, JSCE, No.682/I-56, pp.383-390
Japanese Society of Steel Construction (JSSC) (1995) Fatigue Design Recommendations for Steel Structures
Knight, J. W. (1978) Improving the Fatigue Strength of Fillet Welded Joints by Grinding and Peening, Welding Research International
Kondo, A., Yamada, K., Kikuchi, Y.(1994) Fatgiue of 10-year Weathered Welded Joints of Weathering and Structural Steels, Journal of Structural Mechanics and Earthquake Engineering, JSCE, No.489/I-27, pp.121-127
Maddox, S. J. (1985) Improving the Fatigue Strength of Welded Joints by Peening, Metal Construction. April 17(85052) pp 220-224
Maddox, S. J. (1991) Fatigue Strength of Welded Structures, 2nd Edition
Millington D. (1973) TIG Dressing for the Improvement of Fatigue Properties in Welded High Strength Steel, Metal Construction and British Welding Journal, IIW Document XIII-698-73
Sakano, M., Mikami, I., Yonemoto, M, Yasuike, H.,(1992) Fatigue Test and Life Estimation of Plate Girder Specimens with 4 Types of Vertical Stiffener Connections, Shimodarira, Journal of structural engineering, JSCE, Vol.38, pp.999-1010
Shimodarira, T., Nakakado, K., Hashimoto, A., (1997) Fatigue Strength of Slant Load Effected Fillet Welded Joints, Proceeding of Ibaraki Kouenkai, Japan Society of Mechanical Engineers, pp.131-132
※ AI-Helper는 부적절한 답변을 할 수 있습니다.