최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. B. B, v.33 no.6 = no.285, 2009년, pp.418 - 426
한지웅 (한국원자력연구원) , 어재혁 (한국원자력연구원) , 이태호 (한국원자력연구원) , 김성오 (한국원자력연구원)
The effect of an inertia moment of a pump flywheel on the thermal-hydraulic behaviors of the KALIMER-600(Korea Advanced LIquid MEtal Reactor) reactor pool during an early-phase of a loss of normal heat sink accident was investigated. The thermal-hydraulic analyses for a steady and a transient state ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
액체 금속로는 무엇을 냉각제로 쓰는가? | 이와 관련하여 한국원자력연구원 에서도 KALIMER-600(Korea Advanced LIquid MEtal Reactor)에 대한 개념 설계안(2)을 제시하였다. 액체 금속로는 열전도율이 우수한 소듐을 냉각재로 활용하며, 노심 입출구의 평균온도가 각각 390℃ 및 545℃의 고온 조건에서 운전된다. 만일 전원공급 중단에 의해 원자로 열제거 계통이 정지되는 사고가 발생할 경우에도 노심에서의 핵연료 붕괴열에 의한 열발생은 지속된다. | |
액체 금속로의 노심 입출구의 평균온도는? | 이와 관련하여 한국원자력연구원 에서도 KALIMER-600(Korea Advanced LIquid MEtal Reactor)에 대한 개념 설계안(2)을 제시하였다. 액체 금속로는 열전도율이 우수한 소듐을 냉각재로 활용하며, 노심 입출구의 평균온도가 각각 390℃ 및 545℃의 고온 조건에서 운전된다. 만일 전원공급 중단에 의해 원자로 열제거 계통이 정지되는 사고가 발생할 경우에도 노심에서의 핵연료 붕괴열에 의한 열발생은 지속된다. |
Till, C. E., Chang, Y. I., and Hannum, W. H., 1997, 'The Integral Fast Reactor-An Overview,' Progress in Nuclear Energy, Vol. 31, No. 1/2, pp.3-11
Hahn, D. H. et al., 2007, 'KALIMER-600 Conceptual Design Report,' KAERI/TR-3381/2007
Sim, Y. S., 2008, 'Introduction of IDINHX, A New Heat Exchanger for Passive Decay Heat Removal,' Nuclear Technology, Vol. 161, MAR. pp.299-314
Garner, P. L., Blomquist, R. N., and Gelbard, E. M., 1992, 'COMMIX-1AR/P:A Threedimensional Transient Single-phase Computer Program for Thermal Hydraulic Analysis of Single and Multicomponent Systems Volume2 : User's Guide,' Argonne National Laboratory, ANL-92/33
Tzanos, Constantine P. and Pedersen, Dean R., 1990, 'Analysis of RVACS tests for COMMIX Validation,' Nuclear Engineering and Design, Vol. 121, pp.59-67
Rust, K., Tschoke, H. and Weinberg, D., 1994, 'Influence of the Position and Number of Decay Heat Exchangers on the Thermal Hydraulics of a Slab Test Facility, A Comparison of Analytical and Experimental Data,' Experimental Thermal and Fluid Science, Vol. 9, pp.413-425
Jeon, W. D., 2004, 'Flow Analysis Report in KALIMER-600,' KAERI, LMR/FS200-AR-01/2004
Choi, S. K., 2005, 'Improvement on methodology for setting moment of inertia and
Choi, B. Y., 2007, 'Thermal-hydraulic analysis in core catcher,' LMR/FS100-AR-02-Rev.0/07
Han, J. W., Lee, T. H., Eoh, J. H., and Kim, S. O., 2008, Investigation into Thermal-hydraulic behavior in the KALIMER-600 Pool in a steady state, Transaction of Korean Nuclear Society Spring Meeting, pp.61-62
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.