최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국공작기계학회지 = Journal of the Korean society of machine tool engineers, v.18 no.4, 2009년, pp.417 - 422
이병옥 (아주대학교 기계공학과) , 최재혁 (아주대 기계공학과) , 태준성 (아주대 기계공학과)
The injection mold cooling circuit optimization was studied with a response surface method in the previous research. It took so much time to find an optimum solution for a large product due to an extensive amount of calculation time for the CAE analysis. In order to use the optimization technique in...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Zarkdas, D. M. and Xanthos, M., 2003, "Prediction of Cooling time in injection molding," Advances in Polymer Technology, Vol. 22, No.3, pp. 188-208.
Menges, G., Michaeli, W., and Mohren, P., 2001, How to make injection molds, HANSER, Munich, German
Liang, Ji-Zhao, 2002, "An Optimal Design of Cooling System for Injection Mold," Polymer-plastics Technology and Engineering, Vol. 41, No.2, pp. 261-271.
Tang, Li Q., Constantin Chassapis, Souran Manoocheri, 1997, "Optimal cooling system for multi-cavity injection molding," Finite Elements in Analysis and Design, Vol. 26, pp. 229-251.
Huang, Jinhua, Fadel, G. M., 2001, "Bi-Objective Optimization Design of Heterogeneous Injection Mold Cooling Systems," Journal of Mechanical Design, Vol. 123, pp. 226-239.
Chang, H. K., 2008, A Study on automatic optimization of cooling circuit design in injection mold, M.S. Thesis, Ajou University, Republic of Korea.
Chung, H. W., 2008, A Study of automated optimi- zation of injection-mold cooling-line design with predefined product temperature, M.S. Thesis, Ajou University, Republic of Korea.
Montgomery, D. C, 2005, Design and Analysis of Experiments, John Wiley & Sons, Hoboken, NJ, U.S.A.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.