마이크로스트립 인터디지털(interdigtal) 여파기는 공진기의 폭, 길이, 공진기 사이의 간격과 탭의 위치로 설계하는데, 설계파라미터의 수를 줄이는 것이 구현 측면에서 유리하다. 본 논문에서는 마이크로스트립 인터디지털 여파기의 설계파라미터 중에서 공진기의 폭을 고정시킨 것과 서로 다른 폭을 갖는 두 종류의 여파기를 국내 UWB(Ultra Wide-Band) 주파수 대역에서 설계 및 구현하였다. 여파기의 성능 측정 결과 공진기의 폭을 고정한 low-band high 여파기의 삽입손실은 1.49dB, -10dB 대역폭은 750MHz였고, 4.8GHz에서 -35.7dB의 감쇄특성을 가졌으며, S11은 -13dB 이하로 측정되었다. 공진기의 폭이 서로 다른 low-band 여파기는 삽입손실 1.6dB, -10dB 대역폭은1.63GHz로 측정되었고, S11은 -8dB 이하로 측정되었다.
마이크로스트립 인터디지털(interdigtal) 여파기는 공진기의 폭, 길이, 공진기 사이의 간격과 탭의 위치로 설계하는데, 설계파라미터의 수를 줄이는 것이 구현 측면에서 유리하다. 본 논문에서는 마이크로스트립 인터디지털 여파기의 설계파라미터 중에서 공진기의 폭을 고정시킨 것과 서로 다른 폭을 갖는 두 종류의 여파기를 국내 UWB(Ultra Wide-Band) 주파수 대역에서 설계 및 구현하였다. 여파기의 성능 측정 결과 공진기의 폭을 고정한 low-band high 여파기의 삽입손실은 1.49dB, -10dB 대역폭은 750MHz였고, 4.8GHz에서 -35.7dB의 감쇄특성을 가졌으며, S11은 -13dB 이하로 측정되었다. 공진기의 폭이 서로 다른 low-band 여파기는 삽입손실 1.6dB, -10dB 대역폭은1.63GHz로 측정되었고, S11은 -8dB 이하로 측정되었다.
Microstrip interdigital filter is designed with the width and length of a resonator, the gap distance between resonators and the location of a tap. When designing filters, it is a benefit to design with few design parameters comparing to many design parameters. In this paper we design and implement ...
Microstrip interdigital filter is designed with the width and length of a resonator, the gap distance between resonators and the location of a tap. When designing filters, it is a benefit to design with few design parameters comparing to many design parameters. In this paper we design and implement two microstrip interdigital filters operating in the UWB(Ultra Wide-Band) frequency band, one using a fixed width of a resonator and the other using a different width of resonators. The test results of the implemented filters show that the low-band high filter with a fixed width has the insertion loss of 1.49dB, -10dB band width of 720MHz, -35.7dBattenuation at 4.8GHzand below -13dB of S11. The filter with a different width of resonators has the insertion loss of 1.6dB, -10dBbandwidth of 1.63GHz and below-8dBof S11.
Microstrip interdigital filter is designed with the width and length of a resonator, the gap distance between resonators and the location of a tap. When designing filters, it is a benefit to design with few design parameters comparing to many design parameters. In this paper we design and implement two microstrip interdigital filters operating in the UWB(Ultra Wide-Band) frequency band, one using a fixed width of a resonator and the other using a different width of resonators. The test results of the implemented filters show that the low-band high filter with a fixed width has the insertion loss of 1.49dB, -10dB band width of 720MHz, -35.7dBattenuation at 4.8GHzand below -13dB of S11. The filter with a different width of resonators has the insertion loss of 1.6dB, -10dBbandwidth of 1.63GHz and below-8dBof S11.
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
문제 정의
또한 본 논문에는 공진기의 폭을 고정 한 것과 공진가의 폭이 서로 다른 두 가지 방법으로 설계한 여파기에 대한 시험결과가 기술되어 있다.
본 논문에서는 공진기의 폭을 고정한 것과 서로 다른 폭을 갖는 두 종류의 마이크로스트립 인터디지털 여파기를 설계 및 구현하였다. 구현한 인터디지털 여파기의 측정 결과 공진기의 폭을 고정한 low-band high 여파기의 삽입손실은 L49dB, -lOdB 대역폭은 720MHz이고 4.
제안 방법
일반적으로 설계 파라미터의 수가 적어야 구현에서 유리하다: 본 논문에는 참고문헌 [4]의 결과를 바탕으로 설계 파라미터를 줄이기 위해서 공진기의 폭을 하나의 값으로 고정시키고, 공진기의 길이와 공진기 사이의 간격 그리고 탭의 위치만으로 인터디지털 여파기를 설계하였다. 또한 본 논문에는 공진기의 폭을 고정 한 것과 공진가의 폭이 서로 다른 두 가지 방법으로 설계한 여파기에 대한 시험결과가 기술되어 있다.
대상 데이터
여파기의 설계 및 제작에는Rogers사의 R4003(유전율: 3.38, h: 0.508mm) 기판을 이용하였다. 그림 2에는 3.
성능/효과
63GHz로 측정 되 었고, S11 은 -8dB 이하로 측정 되 었다. 공진기의 폭을 고정한 여파기의 경우에는 공진기의 폭을 변화시키는 경우에 비해서 작게 구현 가능함을 확인할 수 있었다.
설계 및 구현하였다. 구현한 인터디지털 여파기의 측정 결과 공진기의 폭을 고정한 low-band high 여파기의 삽입손실은 L49dB, -lOdB 대역폭은 720MHz이고 4.8GHz에서 -35.7dB의 감쇠특성을 가졌으며, S11 은 -13dB 이하로 측정되었다. 공진기의 폭이 서로 다른 low-band 여파기는 삽입손실 1.
참고문헌 (8)
FCC, Part 15 - Radio Frequency Devices, Feb. 2006
EN 302 065,"Electromagnetic compatibility and Radio spectrum Matters(ERM); Ultra WideBand technologies for communication purposes; Harmonized EN covering seeential requirements of article 3.2 of the R&TTE Directive," ETSI, April 2007
방송통신위원회 고시 제2008-74호: 신고하지 아니하고 개설할 수 있는 무선국용 무선기기
강상기, 이재명, 홍성용,"UWB용 BPF의 설계 및 구현,"한국해양통신학회논문지, 12권 5호, pp. 815-820, 2008. 05
G.L. Matthaei,"Interdigital Band-pass Filters,"IEEE Trans. Microwave Theory Tech., vol. 10, no. 6, pp. 479-491, Nov. 1962
S. Caspi and J. Adelman, "Design of combline and interdigital filters with tapped-line input," IEEE Trans. Microwave Theory Tech., vol. 36, no. 4, pp.759-763, April 1988
V. K. Tripathi,"Asymmetric Coupled Transmission Lines in an Inhomogeneous Medium,"IEEE Trans. Microwave Theory Tech., vol. 23, no. 9, pp. 734-739, Sep. 1975
※ AI-Helper는 부적절한 답변을 할 수 있습니다.