최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국CAD/CAM학회논문집 = Transactions of the Society of CAD/CAM Engineers, v.14 no.5, 2009년, pp.314 - 322
최상수 (한국생산기술연구원 생산자동화지원팀, 성균관대학교 대학원 산업공학과) , 양태호 (성균관대학교 대학원 산업공학과) , 노상도 (성균관대학교 공과대학 시스템경영공학과) , 진희주 (동국대학교 산업시스템공학과) , 이용한 (동국대학교 산업시스템공학과) , 이인석 (GM대우자동차 생산기술연구소 금형기술팀) , 권성오 (GM대우자동차 생산기술연구소 금형기술팀)
In these days, automotive companies are trying to develop new manufacturing technologies and paradigms for rapid product development and production. The press die development process account for 40% of entire vehicle development process, and tryout process usually takes 3 to 4 months, and it is the ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Kang, M. J., “ The Technical State of Automotive Production System", Transaction of the KSAE, Vol. 19, No. 1, pp. 12-21, 1997
이종문, "금형설계 및 제작", 기전연구사, pp. 271-279, 2006
이강걸, 노상도, 이인석, 송명환, "웹과 모바일 기술을 이용한 프레스 금형의 불량관리에 관한 연구", 대한산업공학회지, Vol. 18, No. 1, pp. 88-94, 2005
이인석, 권성오, 이형진, 최상수, 양태호, 노상도, "u-PLM, 생산 제조 공정 및 품질 관리를 위한 유비쿼터스와 PlM 기술 적용을 위한 연구", 한국 CAD/CAM학회 학술발표회, 2009
표철식, "훤희 보이는 RFID/USN", 전자신문사, pp. 18-21, 2008
2007 RFIDEPC 국제 컨퍼런스 발표자료, http://www.rfidepc.or.kr/rfid _ board/view. asp ?tbpdf_pri&page 1 &no 102
RFID 업종별 도입 현황-자동차 업종, http://www.etnews.co. kI띠ews/
Johnson, D., "RFID Tags Improve Tracking, Quality on Ford Line in Mexico", Control Eηgineering, Vol. 29, No. 11, pp. 16-16, 2002
Zhekun Li, Fuyu Li, Lei Gao, Yujing Fan, "Concurrent Intelligent Manufacturing Based on RFID", Advanced Design and Manufacture to Gain a Competitive Edge, Springer London, 2008
Baudin, M. and Rao, A., "RFID Applications III Manufacturing", Manufacturing Management & Technology Institute, 2000
Ashfaque Ahmed Ansari, S Murali, Venkatech Natarajan, "A Case for RFID in Indian Automotive Industry", Society of Automotive Engineers, 2005
Robin G. Qiu, "RFID-enabled Automation in Support of Factory Integration", Robotics and Computer-Integrated Manufacturing, Vol. 23, pp. 677-683, 2007
Sheen, D. M., Lee, C. H., Noh, S. D. and Lee, K. W., "Process Plarming and NC-code Generation in Manufacturing of Press Dies for Production of Car Bodies", International Journal of Production Research, Vol. 42, No.1, pp. 37-49, 2004
양태호, 정연경, 최상수, 이인석, 노상도, "사례기반 추론을 이용한 금형 트라이아웃 보고서 작성 지원 기능 개발", 한국 CAD/CAM 학회 정기학술발표회, 2009
Kolodner, J., "Case-Based Reasoning", Morgan Kaufman Pub. Inc., 1993
※ AI-Helper는 부적절한 답변을 할 수 있습니다.