참고문헌 (15)

1. A. W. Burton, "Innovation drivers for electric power-assisted steering," IEEE Control Systems Magazine, pp. 30-39, Nov. 2003. 

2. H. Eki, T. Teratani, and T. Iwasaki, "Power consumption and conversion of EPS systems," in Power Conversion Conference (PCC), pp. 1333- 1339, 2007. 

3. G. Ombach and J. Junak, "Two rotors designs' comparison of permanent magnet brushless synchronous motor for an electric power steering application," in European Conference on Power Electronics and Applications( EPE), pp. 1-9, 2007. 

4. N. Bianchi, Michele D. Pre, and S. Bolognani, "Design of a fault-tolerant IPM motor for electric power steering," IEEE Trans. on Vehicular Technology, Vol. 55, No. 4. pp. 1102-1111, Jul. 2006. 

   상세보기

5. L. Xinhua, W. Jie, Z. Zhiwei, and Z. Baixing, "Development of EPS rare-earth permanent-magnet brushless direct current motor," in proceedings of International Conference on Electrical Machines and Systems(ICEMS), Vol. 3, pp. 2302 ？ 2305, 2005 

6. J. Ahn, S. B. Lim, K. C. Kim, J. Lee, J. H. Choi, S. Kim, and J. P. Hong, "Field weakening control of synchronous reluctance motor for electric power steering," IET Electrical Power Applications, Vol. 1, No. 4, pp. 565-570, Jul. 2007. 

   상세보기

7. Y. H. Cho, Y. W. Jeong, and S. C. Yun, "Development of motor driven power steering control system using surface mounted permanent magnet synchronous motor, " in Conf. of KIPE, pp. 85-87, Nov. 2006. 

8. C. J. Yoo, "An Experimental study on motor noise reduction of electric power steering," Journal of the Korea Society for Power System Engineering, Vol. 12, No. 6, pp. 83-87, Dec. 2008. 

9. S. Chen, "Controller-induced parasitic torque ripples in a PM synchronous motor," IEEE Transactions on Industry Applications, Vol. 38, No. 5, pp. 1273-1281, Sep./Oct. 2002. 

   상세보기

10. G. L. Kurnia, A. D. Larminat, R. Desmond, and P. O'Gorman, "A low torque ripple PMSM drive for EPS applications," IEEE Applied Power Electronics Conference and Exposition (APEC), Vol. 2, pp. 1130-1136, 2004. 

11. J. Wu and Y. Y. Wang, "A new technique for reducing cogging torque in EPS permanent magnet brushless DC motor," in International Conference on Electrical Machines and Systems(ICEMS), pp. 789-791, 2007. 

12. L. Gasparin and R. Fiser, "Intensity of the native and additional harmonic components in cogging torque due to design parameters of permanentmagnet motors," in International Conference on Power Electronics and Drive Systems, pp. 1062 ？ 1067, 2009. 

13. G. H. Lee, "Active cancellation of PMSM torque ripple caused by magnetic saturation for EPS applications," Journal of Power Electronics, Vol. 10, No. 2, pp. 176-180, Mar. 2010. 

    원문보기 상세보기

14. G. Liu, A. Kurnia, R. D. Larminat, and S. J. Rotter, "Position sensor error analysis for EPS motor drive," in International Electric Machines and Drives Conference(IEMDC), Vol. 1, pp. 249 ？ 254, 2003. 

15. H. S. Mok, J. M. Lee, G. H. Choe, S. H. Kim, and Y. H. Cho, "Analysis and a compensation method for torque ripple caused by position sensor error in PMSM's vector control," Journal of the Korean Institute of Power Electronics, Vol. 12, No. 6, pp. 449-455, Dec. 2007. 

저자의 다른 논문 :

목형수 (47)