$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

ESPI를 이용한 자동차 TPS 면외변형 계측
Out-of-Plane Deformation Measurement of TPS in Vehicle Using ESPI 원문보기

비파괴검사학회지 = Journal of the Korean Society for Nondestructive Testing, v.30 no.5, 2010년, pp.423 - 428  

한상길 (인천대학교 물리학과) ,  함효식 (인천대학교 물리학과) ,  함상현 (인천대학교 물리학과) ,  이종황 (현대기아자동차 그룹 내구신뢰성 팀) ,  정원욱 (현대기아자동차 그룹 내구신뢰성 팀) ,  이창희 (대우일렉트로닉스(주) 품질신뢰성연구소) ,  이상봉 (인천대학교 물리학과) ,  최성을 (인천대학교 물리학과)

초록
AI-Helper 아이콘AI-Helper

본 논문에서는 ESPI 방법을 이용하여 자동차 엔진의 핵심 부품인 TPS의 열변형력에 따른 변외변형을 측정하여 열변형 특성을 분석하였다. 높은 해상도의 CCD와 줌렌즈를 사용하여 부품의 검사영역을 가로 세로 각각 5cm로 최소화하였다. 주행거리가 다른 TPS 부품들을 4-step 위상이동법과 위상 연속화를 통해 변형량이 연속적으로 변하는 위상도를 얻었고, 3차원으로 변형의 모양과 크기를 나타내었다. 약 $70^{\circ}C$의 온도를 유지하면서 TPS 부품에 열을 가한 경우 주행거리가 길어질수록 TPS 변형은 크게 측정되었고, 위로 볼록한 형태로 변형되었다. 그리고 내부결함이 있는 부품에서는 위상도에 불연속적인 무늬가 나타났고, 아래로 오목한 모양을 갖는 변형으로 나타났다.

Abstract AI-Helper 아이콘AI-Helper

In this paper, we analyzed the characteristics of thermal deformation of the TPS which is a core part of engine in vehicle by measuring out-of-plane deformation using ESP!. Inspection area of a test piece was minimized to 5 cm by 5 cm by using a high resolution CCD and a zoom lens. 4-step phase shif...

주제어

참고문헌 (15)

  1. ?D. Malacara, "Optical shop testing," 3rd Edition, Wiley Series in Pure and Applied Optics, pp. 409-437, John Wiley & Sons Incorporated, United States of America, (1992) 

  2. ?N. J. Butters and J. A. Leendertz, "Speckle pattern and holographic techniques in engineering metrology," Optics and Laser Technology, Vol. 3, No.1, pp. 26-30 (1972) 

  3. ?S. Sumi, "Speckle pattern correlation method for measurement of surface structural change caused by fatigue," The Society of Materials Japan, Vol. 56, No.7, pp. 17-21 (1976) 

  4. ?G. H. Kaufmann, D. Kerr and N. A. Halliwell, "Contrast enhancement of pulsed ESPI addition fringes," Optics and Lasers in Engineering, Vol. 20, No.1, pp. 25-34 (1994) 

  5. ?A. Davila, D. Kerr and G. H. Kaufmann, "Fast electro-optical system for pulsed ESPI carrier fringe generation," Optics Communications, Vol. 123, No.4, pp. 457-464 (1996) 

  6. ?A. J. Moore and C. Perez-Lopez, "Fringe carrier methods in double-pulsed addition ESPl," Optics Communications, Vol. 141, No. 3, pp. 203-212 (1997) 

  7. ?P. Aswendt, C. Schmidt, D. Zielke, S. Schubert, "ESPI solution for non-contacting MEMS-on-wafer testing," Optics and Lasers in Engineering, Vol 40, No.5, pp. 501-515 (2003) 

  8. ?K. S. Kim, K. S. Kang, Y. J. Kang and S. K. Cheong, "Analysis of an internal crack of ?pressure pipeline using ESPI and shearography," Optics & Laser Technology, Vol. 35, No.8, pp. 639-643 (2003) 

  9. ?L. Augulis, S. Tamuleviius, R. Augulis, J. Bonneville, P. Goudeau and C. Templier, "Electronic speckle pattern interferometry for mechanical testing of thin films," Optics and Lasers in Engineering, Vol. 42, No. 1, pp. 1-8 (2004) 

  10. ?R. K. Mohanty, C. Joenathan and R. S. Sirohi, "Speckle interferometric methods of measuring small out-of-plane displacements," Optics Letter. Vol. 9, No.2, pp. 475-477 (1984) 

  11. ?X. Hu and C. Hu, "Measuring in-plane and out-of-plane coupled motions of microstructures by stroboscopic microscopic interferometry," Optics and Laser Technology, Vol. 12, No.4, pp. 13-20 (2007) 

  12. ?D. W. Robinson and D. C. Williams, "Digital phase stepping speckle interferometry," Optics Letter, Vol. 57, No. 10. pp. 26-30 (1986) 

  13. ?S. Nakadate and H. Saito, "Fringe scanning speckle pattern interferometry," Optics Letter, Vol. 21, No.6, pp. 72-80 (1985) 

  14. ?A. E. Dolinko and H. Kaufmann, "Measurement of the local displacement field generated by a rnicroindentation using digital speckle pattern interferometry and its application to investigate coating adhesion.," Optics and Lasers in Engineering, Vol. 47, No.5, pp. 527-531 (2009) 

  15. U. P. Kumar, B. Bhaduri, N. Krishna Mohan, M. P. Kothiyal and A. K. Asundi, "Microscopic TV holography for MEMS deflection and 3-D surface profile characterization," Optics and Lasers in Engineering, Vol. 46, No.9, pp. 687-694 (2008) 

저자의 다른 논문 :

LOADING...

관련 콘텐츠

저작권 관리 안내
섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로