최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기산업경영시스템학회지 = Journal of society of korea industrial and systems engineering, v.33 no.4, 2010년, pp.153 - 158
박찬웅 (경원대학교 산업정보시스템공학과)
This study presents a single machine scheduling algorithm to minimize total cost(lateness cost, earliness cost and failure cost) by controlling machining speed. Generally, production scheduling uses the information of process planning and machining speed is not changed at production scheduling. And ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
김동항, 기계공작법, 청문각, 1994
오세호, 이근부, 양희중, "동적도착의 총 납기지연 최초소화 문제", 산업경영시스템학회지, 제28권, 제1호, 2005.
손덕수, 이안호, 이정길, 이우영; "고속가공 시스템의 정밀도 평가방법에 관한 연구", 한국공작기계학회 2004년도 춘계학술대회논문집, Apr. 01 : 335-340, 2004.
송호봉, 김태호, 김수용, 한민식, 전언찬; "Influence of Surface Roughness as Cutting Condition on Cutting Processing using Micro-End mill, "한국정밀공학회 2009년도 춘계학술대회논문집, June 03: 97-98, 2009.
Baker, K. R.; Introduction To Sequencing and Scheduling, John Wiley and Sons, Inc., 1974.
Hitomi, P.E.; "Analysis of optimal machining speeds for automatic manufacturing," Int. J. Prod. Res. 27(12) : 1685-1691. 1989.
Koulamas, C. and Iakovou, E.; "Machining economics with interference considerations," Int. J. of Prod. Res., 33(1) : 71-78, 1995.
Rodelicks, L. M., D. T. Phillips, and G. L. Hogg; "A comparison of order release strateges in production control systems," Int. J. of Prod. Res., 30 : 611-626, 1992.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.