높은 차량운행비용(VOC : Vehicle Operating Cost)은 포장도로 복구작업의 주요한 원인이고, 차량운행비용(VOC)은 연료소모량, 오일소모량, 부품교체비용 등으로 구성된다. 이중 연료소모량이 VOC에서 차지하는 비중이 높고, 다른 도로조건에 비해 도로 표면 거칠기가 도로의 노화 정도를 대표적으로 지시하는 값이기 때문에, 본 연구에서는 포장도로의 표면 거칠기(IRI : International RoughnessIndex) 변화에 따른 차량의 연료소모량 변화를 측정하였다. 차량의 연료분사 인젝터의 전압변화를 측정하여 연료소모량을 계산하였고, 속도는 GPS센서를 사용하여 측정하였다. 본 실험 결과를 이용하여 IRI 변화에 대한 연료소모량의 변화율을 계산할 수 있었다. 계산 결과, 40~100km/h 속도영역에서 중형 및 대형 승용차의 연료소모량(L/100km)은 3.5m/km 정도의 IRI 수준에서 IRI(m/lm) 증가율의 7배 정도로 증가하였고, 60km/h의 속도에서 가장 연비가 우수하였다.
높은 차량운행비용(VOC : Vehicle Operating Cost)은 포장도로 복구작업의 주요한 원인이고, 차량운행비용(VOC)은 연료소모량, 오일소모량, 부품교체비용 등으로 구성된다. 이중 연료소모량이 VOC에서 차지하는 비중이 높고, 다른 도로조건에 비해 도로 표면 거칠기가 도로의 노화 정도를 대표적으로 지시하는 값이기 때문에, 본 연구에서는 포장도로의 표면 거칠기(IRI : International Roughness Index) 변화에 따른 차량의 연료소모량 변화를 측정하였다. 차량의 연료분사 인젝터의 전압변화를 측정하여 연료소모량을 계산하였고, 속도는 GPS센서를 사용하여 측정하였다. 본 실험 결과를 이용하여 IRI 변화에 대한 연료소모량의 변화율을 계산할 수 있었다. 계산 결과, 40~100km/h 속도영역에서 중형 및 대형 승용차의 연료소모량(L/100km)은 3.5m/km 정도의 IRI 수준에서 IRI(m/lm) 증가율의 7배 정도로 증가하였고, 60km/h의 속도에서 가장 연비가 우수하였다.
High VOC(Vehicle Operating Cost) is the main reason for the rehabilitation of paved road and VOC is composed of fuel consumption, lubricant oil consumption, parts consumption, etc. Fuel consumption is one of the largest components of VOC and the roughness of road represents the deterioration level o...
High VOC(Vehicle Operating Cost) is the main reason for the rehabilitation of paved road and VOC is composed of fuel consumption, lubricant oil consumption, parts consumption, etc. Fuel consumption is one of the largest components of VOC and the roughness of road represents the deterioration level of the road. For these reasons, the fuel consumption is measured for different IRI(International Roughness Index) in this study. The fuel consumption was measured by processing the voltage signal of fuel injector of vehicle and the speed was measured with GPS. The change rate of fuel consumption for different IRI can be calculated with the results of this test. It's concluded that fuel consumption(L/100km) of medium and large passenger car increases 7 times fast of the increase of IRI(m/km) around 3.5m/km in the speed range of 40 ~ 100km/h, and fuel consumption is the best at 60km/h.
High VOC(Vehicle Operating Cost) is the main reason for the rehabilitation of paved road and VOC is composed of fuel consumption, lubricant oil consumption, parts consumption, etc. Fuel consumption is one of the largest components of VOC and the roughness of road represents the deterioration level of the road. For these reasons, the fuel consumption is measured for different IRI(International Roughness Index) in this study. The fuel consumption was measured by processing the voltage signal of fuel injector of vehicle and the speed was measured with GPS. The change rate of fuel consumption for different IRI can be calculated with the results of this test. It's concluded that fuel consumption(L/100km) of medium and large passenger car increases 7 times fast of the increase of IRI(m/km) around 3.5m/km in the speed range of 40 ~ 100km/h, and fuel consumption is the best at 60km/h.
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
문제 정의
So we measured the change rate of fuel consumption for the road surface roughness and various speeds of Korean vehicles in this study. We can determine to rehabilitate the road or not with the results of this study.
제안 방법
It’s important to measure precise road roughness because the goal of this study is to understand the relation of fuel consumption and road roughness.
So the average vehicle operating speed varies with vehicle and road types and traffic volume. The test speed was determined at 4 points from 40 to 100km/h with increase of 20km/h(i.e. 40, 60, 80, 100km/h) in this study, so that the test results can be used for different operating speeds.
성능/효과
59, which is so close to each other. So we should be careful to apply this results, and the conclusion is that the fuel consumption(L/100km) for medium and large car increases 7times fast with increasing IRI around 3.5m/km in the speed range of 40~100km/h. And it’s necessary to do more fuel consumption tests for different road surface roughness.
참고문헌 (3)
Gorski, M. B. (1982), "The Implication of the International Road Roughness Experiment for Belgium," TTR, 59-65
R. Ul-Islam, M. Nozawa, N. Ooguri & K. Tsunokawa. (2008), "A Preliminary Calibration Exercise of HDM-4's Road User Effect Relationships for Japanese Conditions," Int. J. Civil & Environmental Engineering
Wilian D. D. Paterson. (1982), "International Roughness Index : Relationship to other measures of roughness and riding quality," TRR 1084, 49-59.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.