최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기제어·로봇·시스템학회 논문지 = Journal of institute of control, robotics and systems, v.16 no.6, 2010년, pp.532 - 538
이병수 (계명대학교 기계자동차공학과) , 박민규 (영남이공대학 기계자동차학부) , 성금길 (영남이공대학 기계자동차학부)
SD (Smart Door) is a human friendly power-assisted door system initially targeted for passenger car doors. The Smart Door offers comfort and safety to passengers or/and drivers by supplying additional power. Amount of power supplied by the Smart Door system is depend on the environment where the aut...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
기존의 자동차에서 문이 한꺼번에 열리는 것을 방지하기 위해 사용한 것은 무엇인가? | 따라서 승객은 자신의 의도에 의하여 문이 작동되지 않을 경우 불편함을 느끼며 어떤 경우에는 부상의 위험도 발생한다. 기존의 자동차 문 내부에는 차체와 문 사이에 도어 체커(door checker) 또는 가이드라는 부품을 장착하여 문 개폐시 문이 한꺼번에 열리는 것을 방지하도록 배려하고 있다. 그러나 좁은 공간이나, 내리막 경사 및 옆으로 경사진 곳 등에 주차할 경우 문의 자중에 의하여 승객이 원하는 적당한 위치에서 문이 고정되지 않는다. | |
차량용 지능형 물품 중 문을 위한 장치에는 무엇이 있나? | 차량용 지능형 부품 중 문을 위한 장치에는 최근의 자동슬라이딩 도어(auto sliding door) 및 전동식 파워도어 시스템 등이 있다[1-3]. 그러나 이러한 장치만으로는 자동차의 주차 각도에 따른 문 개폐력의 변화를 보상할 수 없다. |
M. Grujicic, G. Arakere, V. Sellappan, J. C. Ziegert, F. Y. Kocer, and D. Schmueser, "Multi-disciplinary design optimization of a composite car door for structural performance, NVH, Crashworthiness, Durability and Manufacturability," Multidiscipline Modeling in Mat. And Str, May 2009.
D. H. Yoon, J. H. Lee, and J. H. Yoo, "Developmentand optimization of automobile parts for door opening angle control system," Proc. of the KSAE Annual Spring Conference, pp. 1235-1240, 2002.
R. Nayak and K. Im, "Optimization of the side swing door closing effort," SAE International, Technical Paper no. 2003-01-0871, 2003.
I. Takeda, T. Sakai, T. Yamada, S. Onozawa, H. Kuzuya, and T. Matsui, "Concurrent development environment combining mechanical and control systems for PBD and PSD," SAE International, Technical Paper no. 2004-01-0765, 2004.
P. G. de Santos, J. Estremera, E. Garcia, and M. Armada, "Power assist devices for installing plaster panels in construction," Automation in Construction, no. 17, pp. 459-466, 2008.
J. H. Kim, H. S. Lee, J. H. Lee, S. W. Kim, H. K. Park, and S. H. Lee, "Ergonomic Design and Biomechanics Simulation for Car Door System," Korean Society for Precision Engineering 2007 Spring Conference, pp. 583-584, 2007.
D. A. Haessig Jr. and B. Friedland, "On the modeling and simulation of friction," Journal of Dynamic Systems, Measurement, and Control, vol. 113, pp. 354-362, 1991.
SimMechanics 2 User's Guide, The MathWorks Inc., 2008.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.